Italy
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Gys
Reference: 037618
(1 review)
€86.28
72,50 € tax excl.
Fast delivery
2-year warranty
Ohmic detection nozzle 20 / 70 A designed for use with the Plasma torch reference AT-70
Plasma Cutter Accessories - Plasma Accessories and Consumables | EURO-WELDING
Refine your search
By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View my favorites
View as
Supplier stock
Telwin
Reference: 802143
€26.68
22,42 € tax excl.
Fast delivery
2-year warranty
This magnetic cutting guide helps you make straight cuts.
It is placed on the sheet metal to be cut and stays in position during cutting thanks to its magnet.
Save 20%
In stock
Telwin
Reference: 804059
€148.70
€185.88
124,96 € tax excl.
Free delivery
2-year warranty
This compass kit delivered in a case is suitable for the torches on the following plasma cutters:
Superior plasma 70
Superior plasma 100
Superior plasma 160
In stock
Telwin
Reference: 804169
(1 review)
€57.51
48,33 € tax excl.
Fast delivery
2-year warranty
This compass kit is suitable for the torches on the following plasma cutters:
Technology plasma 41 XT
Technology plasma 54 XT
Technology plasma 60 XT
Supplier stock
Telwin
Reference: 804976
€146.76
123,33 € tax excl.
Free delivery
2-year warranty
This CNC interface kit is installed between your plasma cutter and a numerically controlled cutting table
This kit is compatible with TELWIN brand plasma cutters whose model names are listed below:
Superior Plasma 70-100-160.
Cable length 10 m
Supplier stock
Telwin
Reference: 804108
€244.94
205,83 € tax excl.
or 3 x 81,65 €
Free delivery
2-year warranty
This kit for a manual torch includes:
1 torch tip
8 electrodes
3 nozzles 20-50A
5 nozzles 70 A
1 diffuser
This kit is compatible with TELWIN brand plasma cutters;
Reference:
SUPERIOR PLASMA 70
Supplier stock
Telwin
Reference: 802956
€167.59
140,83 € tax excl.
or 3 x 55,86 €
Free delivery
2-year warranty
This kit for manual torch includes:
1 Skid
1 Electrode
1 Nozzle 85 A
1 Cup
1 Diffuser
This kit is suitable for TELWIN brand plasma cutters;
References:
SUPERIOR PLASMA 100
SUPERIOR PLASMA 160
In stock
Telwin
Reference: 804417
(2 reviews)
€98.18
82,50 € tax excl.
Fast delivery
2-year warranty
This kit includes:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
In stock
Telwin
Reference: 804416
(2 reviews)
€118.01
99,17 € tax excl.
Fast delivery
2-year warranty
This kit includes:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
Supplier stock
Telwin
Reference: 804415
(3 reviews)
€104.13
87,50 € tax excl.
Fast delivery
2-year warranty
This kit contains:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
This kit is suitable for the Telwin plasma cutters listed below
Technology 41XT
Infinity PLASMA 40
In stock
Gys
Reference: 037595
(2 reviews)
€44.23
37,17 € tax excl.
Fast delivery
2-year warranty
5 gouging nozzles 70 A for plasma torch MT-70
In stock
Gys
Reference: 037557
(4 reviews)
€38.68
32,50 € tax excl.
Fast delivery
2-year warranty
1 diffuser 20/70 A for plasma torch AT -70 -MT 70
In stock
Gys
Reference: 037564
(5 reviews)
€34.71
29,17 € tax excl.
Fast delivery
2-year warranty
5 electrodes 20/70 A for plasma torch MT-70 / AT-70
In stock
Gys
Reference: 037588
(1 review)
€22.31
18,75 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles 70 A for plasma torch MT-70 / AT-70
In stock
Gys
Reference: 037571
(3 reviews)
€24.30
20,42 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles for plasma torch MT-70 / AT-70
In stock
Gys
Reference: 037601
(3 reviews)
€46.91
39,42 € tax excl.
Fast delivery
2-year warranty
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
In stock
Gys
Reference: 037649
(3 reviews)
€25.74
21,63 € tax excl.
Fast delivery
2-year warranty
1 cutting deflector pad 20/70A for automatic torch AT-70
In stock
Gys
Reference: 037632
(3 reviews)
€24.30
20,42 € tax excl.
Fast delivery
2-year warranty
1 gouging pad 20/70A for torch MT -70
In stock
Gys
Reference: 037625
(3 reviews)
€25.74
21,63 € tax excl.
Fast delivery
2-year warranty
1 cutting guide 20/70A for torch MT -70
In stock
Gys
Reference: 039988
(1 review)
€326.26
274,17 € tax excl.
or 4 x 81,57 €
Free delivery
2-year warranty
This CNC interface kit is installed between your Plasma cutter and a numerically controlled cutting table
This kit is compatible with Gys brand plasma cutters whose model names are listed below:
Plasma 45-70-85-105-125
In stock
Lincoln Electric
Reference: w100000333
€90.94
76,42 € tax excl.
Fast delivery
2-year warranty
2 diffusers for Lincoln plasma cutter torch model LC 45, compatible with the original torch supplied with the Tomawak 45
In stock
Lincoln Electric
Reference: W100000340
€85.29
71,67 € tax excl.
Fast delivery
2-year warranty
1 protection cup for LC-45 torch for the Lincoln Tomahawk 45 plasma cutter
In stock
Lincoln Electric
Reference: W100000330
€60.30
50,67 € tax excl.
Fast delivery
2-year warranty
3 protection shields 45 A for LC-45 torch, original supply for the Lincoln Tomahawk 45 plasma cutter
In stock
Lincoln Electric
Reference: W100000329
€48.49
40,75 € tax excl.
Fast delivery
2-year warranty
5 nozzles 45 A for Lincoln plasma cutter torch, original supply with the Tomawak 45
In stock
Lincoln Electric
Reference: W100000328
€68.43
57,50 € tax excl.
Fast delivery
2-year warranty
5 medium electrodes for Lincoln plasma cutter torch LC-45, compatible with the original torch supplied with the Tomawak 45
Save 10%
Supplier stock
Telwin
Reference: 804155
€190.90
€212.11
160,42 € tax excl.
or 3 x 63,63 €
Free delivery
2-year warranty
Replacement PH type torch for Telwin Technology 41 XT plasma cutter
EURO connector
Max current: 50 A @35%
Max cutting thickness: 18 mm
Equipped with an air cooling system (operating pressure 5 bar and flow rate between 97 and 110 L/minute)
Length: 4 m
In stock
Telwin
Reference: 804156
(2 reviews)
€197.34
165,83 € tax excl.
or 3 x 65,78 €
Free delivery
2-year warranty
Replacement PK type torch for Telwin Technology 54 XT plasma cutter
EURO connector
Max current: 35 A @35%
Maximum cutting thickness 10 mm
Equipped with an air cooling system (operating pressure 5 bar and flow rate between 97 and 110 L/minute)
Length 4 m
In stock
Gys
Reference: 080782
€53.55
45,00 € tax excl.
Fast delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 tips Ø0.9 mm
- 3 electrodes
This kit is compatible with the TPT 35 torch model, notably used on the GYS Cutter 35K PFC plasma cutter
In stock
Gys
Reference: 080799
(1 review)
€32.73
27,50 € tax excl.
Fast delivery
2-year warranty
10 nozzles for TPT35 type torch supplied with the GYS Cutter 35 K PFC plasma cutter
In stock
Gys
Reference: 040182
(1 review)
€53.25
44,75 € tax excl.
Fast delivery
2-year warranty
4 nozzles suitable for the torch on the Gys Cutter 35 KF PFC plasma cutter.
These nozzles are also compatible with plasma cutters equipped with a torch of type MT25K - TPT25 - TPT35
Supplier stock
Telwin
Reference: 804041
€589.05
495,00 € tax excl.
or 4 x 147,26 €
Free delivery
2-year warranty
This manual plasma torch TWIN PV is suitable for the TELWIN plasma cutter: Superior Plasma 70
It is supplied with a 70 A nozzle.
Length: 6 m
- PV torch for plasma cutting system with 4-metre cable (EURO connection).
- Maximum current 65 A@60% / 50 A@100%.
- Maximum cutting thickness 20 mm.
- Equipped with an air cooling system (pressure 5 bar and flow rate 200-220 litres/min).
Supplier stock
Telwin
Reference: 802955
€927.21
779,17 € tax excl.
or 4 x 231,80 €
Free delivery
2-year warranty
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
In stock
Lincoln Electric
Reference: W100000362
€223.13
187,50 € tax excl.
or 3 x 74,38 €
Free delivery
2-year warranty
Kit compatible with the plasma torch fitted on the Lincoln Tomahawk 45 plasma cutter
It contains:
5 electrodes
1 gas diffuser
5 Nozzles 45 A
1 Nozzle shield
1 Shield cup
In stock
Lincoln Electric
Reference: W0300699A
€123.96
104,17 € tax excl.
Free delivery
2-year warranty
This compass kit for single-phase plasma torch is designed for use with Lincoln plasma cutters fitted with a manual LC 25-65 and 105 type torch
This kit includes a wheeled trolley serving as a cutting guide.
This compass kit allows you to quickly and precisely cut a circle with a maximum diameter of 82 cm.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.- "Centre punch" centring guide for precise centring without perforating the sheet metal.
In stock
Lincoln Electric
Reference: W100000326
€24.30
20,42 € tax excl.
Fast delivery
2-year warranty
5 nozzles for Lincoln Tomahawk 30K plasma cutter torch
Nozzle suitable for the Lincoln LC 30 torch model
In stock
Lincoln Electric
Reference: W100000361
€193.38
162,50 € tax excl.
or 3 x 64,46 €
Free delivery
2-year warranty
Kit adapted to the plasma torch on the Lincoln Tomahawk 30 K plasma cutter with integrated compressor
It contains:
10 electrodes
3 gas diffusers
10 Nozzles 30 A
1 Gas nozzle
1 Pad
In stock
Gys
Reference: 060753
(2 reviews)
€197.34
165,83 € tax excl.
or 3 x 65,78 €
Free delivery
2-year warranty
This TPT 40 plasma torch is compatible with GYS cutting machines: CUTTER 30 FV - EASYCUT 40 - CUTTER 45CT
Length: 4 m
Ignition voltage: 500V maximum
Maximum rated current: 40 A
Duty cycle at 40°: 40 A@60%
Torch cooling: Air
Recommended pressure/flow rate: 5 bar - 100 l/min
Switch characteristics: (trigger) 0.6A / 125V DC - 0.3A / 250V DC
In stock
Lincoln Electric
Reference: W03X0893-25A
€38.18
32,08 € tax excl.
Fast delivery
2-year warranty
5 medium electrodes for Lincoln LC 65 plasma torch.
Suitable for the Tomahawk 1025 plasma cutter model
Supplier stock
Lincoln Electric
Reference: W03X0893-119A
(1 review)
€490.88
412,50 € tax excl.
or 4 x 122,72 €
Free delivery
2-year warranty
3-in-1 accessory, essential for making straight plasma cuts, cutting a chamfered edge or making very precise circular cuts.
- 2 guide carriages with adjustment screws (torch tightening and support rotation locking).
- 1 compass kit ideal for circular cuts between 40 and 82 cm in diameter.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.
- "Centre punch" centring guide for precise centring without perforating the sheet metal.
- Compatible with plasma torches LC65 - LC105
- Premium quality.
In stock
Lincoln Electric
Reference: W03X0893
(1 review)
€33.22
27,92 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles for Lincoln LC 105 manual plasma torch
Compatible with the Tomahawk 1538 plasma cutter
4 amperage options available depending on your needs: 40 - 60 - 80 - 100 A
| Combinations | Price | |
| €33.22 | ||
| €33.22 | ||
| €33.22 | ||
| €36.69 | ||
In stock
Lincoln Electric
Reference: W03X0893-67A
€54.05
45,42 € tax excl.
Fast delivery
2-year warranty
2 protection skids for Lincoln Tomahawk 1538 plasma cutter torch
Suitable for Lincoln LC 105 manual torch
| Combinations | Price | |
| €54.05 | ||
| €44.23 | ||
| €52.06 | ||
In stock
Lincoln Electric
Reference: W03X0893-66A
(2 reviews)
€76.23
64,06 € tax excl.
Fast delivery
2-year warranty
1 gouging nozzle for Lincoln LC 105 plasma torch, manual or automatic
Compatible with the Tomahawk 1538 plasma cutter
In stock
Lincoln Electric
Reference: W03X0893-58A
(2 reviews)
€44.23
37,17 € tax excl.
Fast delivery
2-year warranty
5 nozzles for Lincoln LC 105 manual plasma torch
Compatible with the Tomahawk 1538 plasma cutter
| Combinations | Price | |
| €44.23 | ||
| €51.62 | ||
| €47.30 | ||
| €47.60 | ||
In stock
Lincoln Electric
Reference: W03X0893-65A
€33.71
28,33 € tax excl.
Fast delivery
2-year warranty
5 gouging nozzles for Lincoln LC 105 manual plasma torch
Compatible with the Tomahawk 1538 plasma cutter
In stock
Lincoln Electric
Reference: W03X0893-70R
€59.50
50,00 € tax excl.
Fast delivery
2-year warranty
2 diffusers for Lincoln plasma cutter torch model LC 105 manual
Suitable for Lincoln Tomahawk 1538 model LC 105 manual
In stock
Lincoln Electric
Reference: W03X0893-60A
(2 reviews)
€52.56
44,17 € tax excl.
Fast delivery
2-year warranty
5 medium electrodes for plasma torch Lincoln LC 105 Tomahawk 1538
Suitable for the Lincoln LC 105 Tomahawk 1538 plasma cutter
| Combinations | Price | |
| €52.56 | ||
| €65.95 | ||
In stock
Lincoln Electric
Reference: W8800117R
(2 reviews)
€168.09
141,25 € tax excl.
or 3 x 56,03 €
Free delivery
2-year warranty
Replacement cartridge to be inserted in the Gys filter reference 039728 or the Lincoln filter reference LAF1250.
In stock
Lincoln Electric
Reference: W88X1456A-LAF1250
(6 reviews)
€143.79
120,83 € tax excl.
Free delivery
2-year warranty
This filter protects your torch and consumables from small particles carried by air that interfere with its proper operation.
It comes with a filter cartridge (reference W8800117R)
Lincoln reference: W88X1456A
In stock
Gys
Reference: 040199
(4 reviews)
€34.51
29,00 € tax excl.
Fast delivery
2-year warranty
Cutting carriage for plasma torch S25K / S35K / S45
In stock
Gys
Reference: 037984
(1 review)
€157.68
132,50 € tax excl.
or 3 x 52,56 €
Free delivery
2-year warranty
The compass kit allows you to quickly and precisely cut circles up to 82 cm in diameter.
- Ideal for making circular cuts between 40 and 82 cm in diameter.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.
- "Centre punch" centring guide for precise centring without perforating the sheet metal.
- Compatible with plasma torches MT-70 and MT-125 A
- Premium quality.
Supplier stock
Lincoln Electric
Reference: W03X0893-115A
€583.10
490,00 € tax excl.
or 4 x 145,78 €
Free delivery
2-year warranty
This kit for Lincoln LC 105 manual torch
It contains:
- 1 nozzle
- 1 gouging nozzle
- 2 diffusers
- 5 nozzles 60 A
- 15 nozzles 100A
- 5 gouging nozzles
- 3 extended nozzles 100 A
- 20 electrodes
- 3 extended electrodes
- 1 standoff guide
- 1 nozzle shield
- 1 nozzle shield for gouging
- 1 extended nozzle shield
- 2 O-rings
1 silicone lubricant for O-ring
Kit adapted to the plasma torch on the cutter
Lincoln Tomahawk 1538
Saf Prestojet 100
In stock
Lincoln Electric
Reference: W03X0893-113A
(1 review)
€520.63
437,50 € tax excl.
or 4 x 130,16 €
Free delivery
2-year warranty
This kit for the Lincoln LC 65 manual torch
It contains:
- 1 nozzle
1 gouging nozzle
- 2 diffusers
- 10 nozzles 60 A
- 5 shielded nozzles 60A
- 3 gouging nozzles
- 3 extended nozzles 60 A
- 25 electrodes
- 3 extended electrodes
- 1 standoff guide
- 1 nozzle shield
- 1 nozzle shield for gouging
- 1 extended nozzle shield
- 2 O-rings
1 silicone lubricant for O-ring
Kit adapted to the plasma torch on the Lincoln Tomahawk 1025 cutter
In stock
Gys
Reference: AT-70
(2 reviews)
€669.38
562,50 € tax excl.
or 4 x 167,35 €
Free delivery
2-year warranty
Automatic plasma torch for plasma cutter at-70
Duty cycle: 50 A@100% - 65 A@60% - 70 A@50%
Switch (trigger) characteristics: 0.5 A / 48 VDC
Applied standard EN60974-7/2013
2 lengths available: 6 and 12 m.
Recommended pressure / flow rate:
6 m torch:
For cutting 20 and below 70 A: 5.0 bar - 185 l/min
12 m torch
For cutting 20 and below 70 A: 5.6 bar - 185 l/min
Before installing the torch, the generator must be switched off.
Supplied without consumables.
Product available on order only
| Combinations | Price | |
| €669.38 | ||
| €862.75 | ||
In stock
Lincoln Electric
Reference: W03X0893-50R
€68.43
57,50 € tax excl.
Fast delivery
2-year warranty
3 diffusers for Lincoln Tomahawk 1025 plasma cutter torch
Suitable for Lincoln torches
Models:
LC 65-80/100
LC 65-80/100M
In stock
Lincoln Electric
Reference: W03X0893-41A
€55.24
46,42 € tax excl.
Fast delivery
2-year warranty
1 shield cup for Lincoln Tomahawk 1025 plasma cutter torch
Compatible with Lincoln LC 65 and 65 M torch
In stock
Lincoln Electric
Reference: 1025
€35.70
30,00 € tax excl.
Fast delivery
2-year warranty
5 nozzles for Lincoln Tomahawk 1025 plasma cutter torch
Suitable for Lincoln torches model LC 65 and LC 65M
3 references available:
Welding intensity: 40A - 50A - 60A
| Combinations | Price | |
| €38.68 | ||
| €38.68 | ||
| €35.70 | ||
In stock
Gys
Reference: 061613
(1 review)
€137.84
115,83 € tax excl.
Free delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 x 45 A nozzles
- 3 electrodes
- 1 deflector pad
This kit is compatible with the MT-70 torch model.
In stock
Gys
Reference: 037977
(1 review)
€78.34
65,83 € tax excl.
Fast delivery
2-year warranty
Replacement trolley for the MT70/125A compass kit
In stock
Gys
Reference: MT-70
(1 review)
€490.88
412,50 € tax excl.
or 4 x 122,72 €
Free delivery
2-year warranty
Torch for plasma cutter MT-70
This torch also allows gouging
Duty cycle: 50 A@100% - 65 A@60% - 70 A @ 50%
Switch (trigger) characteristics: 0.5 A / 48 VDC
Applied standard EN60974-7/2013
2 lengths available: 6 and 12 m.
Recommended pressure / flow rate:
6 m torch:
For cutting 20 and below 70 A: 5.0 bar - 185 l/min
For gouging: 5.0 bar - 185 l/min
12 m torch
For cutting 20 and below 70 A: 5.6 bar - 185 l/min
For gouging: 5.6 bar - 185 l/min
For torch installation, the power source must be switched off.
Supplied without consumables.
| Combinations | Price | |
| €490.88 | ||
| €592.03 | ||
Supplier stock
Lincoln Electric
Reference: W03X0893-118A
(1 review)
€183.46
154,17 € tax excl.
or 3 x 61,15 €
Free delivery
2-year warranty
This kit is for the Lincoln LC 25 torch.
It contains:
- 1 nozzle
- 3 diffusers
- 10 tips 25 A
- 10 electrodes
- 3 cutting guides
This kit is suitable for the torch on the Lincoln PC 208 and PC 210 plasma cutters
In stock
Lincoln Electric
Reference: W03X0893-14R
€47.01
39,50 € tax excl.
Fast delivery
2-year warranty
Cutting guide for plasma cutter torch LC 40/60/65/80/100/105 compatible with Lincoln plasma cutters:
Tomahawk 1025
In stock
Lincoln Electric
Reference: W03X0893-78R
€20.33
17,08 € tax excl.
Fast delivery
2-year warranty
Cutting guide for plasma cutter torches on the Lincoln Invertec PC 210 and Tomahawk 30K plasma cutters
This cutting guide is designed for torch models LC25 and LC30
Save 10%
In stock
Trafimet
Reference: CV0024
(4 reviews)
€27.77
€30.86
23,34 € tax excl.
Fast delivery
2-year warranty
Cutting guide carriage for plasma cutter torch
Compatible with TRAFIMET torches;
References:
Ergocut S 25K / S 35K / S 25
Ergocut S45
In stock
Gys
Reference: 038653
(2 reviews)
€574.18
482,50 € tax excl.
or 4 x 143,55 €
Free delivery
2-year warranty
3-in-1 accessory, essential for making straight plasma cuts, cutting a chamfered edge or making highly precise circular cuts.
- 2 guide carriages with adjustment screws (torch tightening and support rotation lock).
- 1 compass kit ideal for circular cuts between 40 and 82 cm in diameter.
- Magnetic centering guide for fast cuts on all ferrous surfaces.
- Screw-on centering guide for non-metallic materials.
- "Centre punch" centering guide for precise centering without perforating the sheet metal.
- Compatible with MT-70 and MT-125 A plasma torches
- Premium quality.
In stock
Gys
Reference: buses 40
(4 reviews)
€49.39
41,50 € tax excl.
Fast delivery
2-year warranty
4 plasma torch nozzles, compatible with GYS Cutter 31, 40 FV, EasyCut 40 models, as well as the Cutter 35KF model with built-in compressor
| Combinations | Price | |
| €49.39 | ||
| €55.04 | ||
In stock
Gys
Reference: 040212
(8 reviews)
€32.63
27,42 € tax excl.
Fast delivery
2-year warranty
10 nozzles for GYS plasma cutter torch
Models Cutter 31 - 40 FV - Easycut 40 and the model with integrated compressor Cutter 35KF - 45 CT
In stock
Gys
Reference: 040168
(8 reviews)
€33.02
27,75 € tax excl.
Fast delivery
2-year warranty
10 medium electrodes for GYS plasma cutter torch
Models Cutter 31 - 40 FV - Easycut 40 as well as the model with integrated compressor Cutter 35KF - CUTTER 45 CT
In stock
Gys
Reference: 040175
(4 reviews)
€18.99
15,96 € tax excl.
Fast delivery
2-year warranty
2 diffusers for plasma cutter torch Gys models Cutter 31 or 40 FV and model with integrated compressor Cutter 35 KF
In stock
Gys
Reference: 037540
€167.59
140,83 € tax excl.
or 3 x 55,86 €
Free delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 x 45 A nozzles and 3 x 70 A nozzles
- 3 electrodes
- 1 deflector pad
It is compatible with the Gys Cutter 70 CT plasma cutter.
In stock
Lincoln Electric
Reference: W03X0893-77A
€31.24
26,25 € tax excl.
Fast delivery
2-year warranty
1 shield cup for Lincoln PC 210 and Tomahawk 30K plasma cutter torch
This nozzle is suitable for Lincoln LC 25 and LC30 torches
In stock
Lincoln Electric
Reference: W03X0893-76A
€17.75
14,92 € tax excl.
Fast delivery
2-year warranty
5 nozzles for Lincoln PC 210 and PC 208 plasma cutter torch
Compatible with Lincoln LC 25 model torches
In stock
Lincoln Electric
Reference: W03X0893-75A
€19.73
16,58 € tax excl.
Fast delivery
2-year warranty
5 medium electrodes for Lincoln PC 210 and PC 208 or Tomahawk 30K plasma cutter torch
These electrodes are suitable for Lincoln LC 25 and LC30 torch models
In stock
Lincoln Electric
Reference: W03X0893-5R
€49.09
41,25 € tax excl.
Fast delivery
2-year warranty
3 diffusers for Lincoln plasma cutter torch PC 210 - PC 208 and Tomahawk 30K
This diffuser is suitable for Lincoln torches model LC 25 and LC30
In stock
Gys
Reference: 040205
(7 reviews)
€98.18
82,50 € tax excl.
Fast delivery
2-year warranty
This compass kit for single-phase plasma torch is used with plasma cutters equipped with one of the plasma torch models below
MT25K - MT35K - TPT40 - Z
This kit also includes a wheeled trolley serving as a cutting guide.
This compass kit allows you to quickly and precisely cut circles up to 134 cm in diameter.
- Ideal for making circular cuts between 10 and 134 cm in diameter.
- Magnetic centring pin for fast cuts on all ferrous surfaces.
- Screw-in centring pin for non-metallic materials.
- "Centre punch" centring pin for precise centring without perforating the sheet metal.
In stock
Gys
Reference: 039964
(2 reviews)
€48.59
40,83 € tax excl.
Fast delivery
2-year warranty
This complete set contains:
- 1 nozzle
- 1 diffuser
- 3 contact tips
- 3 electrodes
It is suitable for the Gys Cutter 35 K plasma cutter
In stock
Gys
Reference: 039957
(13 reviews)
€58.51
49,17 € tax excl.
Fast delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 nozzle tips
- 3 electrodes
It is compatible with the Gys Cutter 31 and 40 FV and Easycut 40 plasma cutters
Save 10%
Supplier stock
Trafimet
Reference: CV0025
€71.04
€78.93
59,70 € tax excl.
Fast delivery
2-year warranty
This compass kit can be used with the DECA 1235 and 1235 K plasma cutter.
Compatible with TRAFIMET torches, references:
-Ergocut S25K / S35K / S25
-Ergocut S45 / S45P
In stock
Trafimet
Reference: PE0106
(1 review)
€16.23
13,64 € tax excl.
Fast delivery
2-year warranty
2 diffusers for DECA 1235 and 1235 K plasma cutter torch
Compatible with TRAFIMET torches;
References:
Ergocut S25K / S35K / S25
Ergocut S45 / S45P
In stock
Trafimet
Reference: PC01
(1 review)
€66.85
56,18 € tax excl.
Fast delivery
2-year warranty
4 nozzles for Trafimet plasma cutter torch
Reference PC0135 fits in particular on the DECA IPAC 1235K plasma cutter available on our website.
Reference PC0116 fits in particular on the DECA IPAC 1235 plasma cutter available on our website and D-PAC 60
| Combinations | Price | |
| €66.85 | ||
| €66.85 | ||
| €59.42 | ||
In stock
Trafimet
Reference: PD0116
(9 reviews)
€19.04
16,00 € tax excl.
Fast delivery
2-year warranty
10 nozzles for plasma cutter torch available in 3 diameters: 0.6 - 0.8 and 0.9 mm.
Suitable for torches found on the brands
Deca
The IPAC 1235 and IPAC 1235 K models accept nozzles of Ø 0.6 and 0.8 mm.
The D-PAC 60 plasma cutter accepts nozzles of Ø 0.8 and 0.9 mm
These nozzles fit on Trafimet S 25 - S25K - S35 K - S45 and S45 P plasma torches
Before purchasing, check the usable nozzle Ø in your Trafimet torch manual.
| Combinations | Price | |
| €21.22 | ||
| €21.22 | ||
| €19.04 | ||
In stock
Trafimet
Reference: PR0110
(8 reviews)
€24.51
20,60 € tax excl.
Fast delivery
2-year warranty
10 medium electrodes for DECA IPAC 1235 or IPAC 1235 K plasma cutter
Suitable for TRAFIMET torches;
References:
Ergocut S25K / S35K / S25
Ergocut S45 / S45P
Supplier stock
Reference: W100000325
€430.39
361,67 € tax excl.
or 4 x 107,60 €
Free delivery
2-year warranty
Lincoln LC 30 4M plasma torch FOR LINCOLN TOMAHAWK 30K MACHINE
Supplier stock
Gys
Reference: 039148
€41.65
35,00 € tax excl.
Fast delivery
2-year warranty
1 diffuser 105/125 A for plasma torch AT-125 - MT 125
Supplier stock
Gys
Reference: 064720
€324.28
272,50 € tax excl.
or 4 x 81,07 €
Free delivery
2-year warranty
This complete kit IS suitable for the Gys Cutter 125 CT plasma torch
In metallurgy, there are several cutting techniques. Some of them are purely theoretical. What is tangible, however, is the revolution that the plasma cutter has brought to the daily work of metallurgists, bodywork specialists, boilermakers, etc. The device allows operations to be carried out with great flexibility and precision down to the thousandth, making the cutting of certain metals less arduous. Aluminium, steel, brass, copper — nothing is beyond it. How? The key lies in the composition of plasma, a material capable of reaching unimaginable temperatures in record time.
Just like a welding machine or any other tool that is part of a welder's equipment, even the smallest accessories are important for a plasma cutter. Plasma cutter torch, nozzle… dive into the heart of this technology and discover its field of action through its various accessories.
Plasma and plasma cutter: what are they?
The main idea that comes to mind when you hear about plasma is no doubt related to blood plasma. However, that is not the case in our context. Here it refers to an ionised conductive gas. Ionised because plasma is a gas in which free electrons can move without needing to be bound to atoms. The gas is therefore air transformed into plasma, which has become conductive and fuses at enormous temperatures in order to repel the metal.
The plasma cutter is therefore a device that condenses the power of plasma in order to cut sheet metal with a thickness ranging from 2 to 44 mm. It also incorporates an inverter whose role is to convert alternating current into direct current. The inverter will then condition the plasma to generate the electric arc so that its ionisation can produce heat equivalent to 18,000°C.
Thus, the plasma cutter is mainly the combination of an auxiliary compressor used to produce air, a plasma torch and a ground clamp that will be fixed to the element to be cut.
What are the different components of a plasma cutter?
To cut metal with such efficiency, the plasma cutter can rely on a set of essential elements:
- The inverter: for all professional accessories carrying high-intensity current, an inverter is a necessity. It can be with or without compression, but must undeniably operate on direct current (between 230 and 400 V);
- The plasma torch: this is in a sense the centrepiece of the assembly since it conducts the plasma. It comes with a cable and a flexible hose (3 to 4 metres) to give you a certain freedom of movement;
- Guiding accessories: their function is essentially to help the device achieve greater precision;
- The ground cable: it is used simply to connect the clamp to the ground;
- The inverter: this is the component of the plasma cutter with a particularly interesting technology. It gives the device the character of intelligent equipment. This is explained by the fact that, thanks to the inverter, it is possible to combine electronics with welding or cutting methods.
How does a plasma cutter work?
The operating principle of a plasma cutter is fairly simple. First, you will need to switch on the device using a switch. Then take the ground clamp and place it on the sheet metal to be cut. Place the plasma torch on the part to be cut and then press the trigger which, thanks to the high frequency, will trigger remote ignition so that the metal can enter fusion. Make sure, however, that the plasma cutter torch distance is appropriate so that the result can be clean and regular.
Furthermore, if you do not have a steady hand, there are accessories specially designed to allow you to use the plasma cutter torch with great precision. You can find from your supplier a compass that will assist you in disc cutting, a standoff guide that can be moved closer or further away depending on usage. You can also use a guiding ruler as well as many other plasma cutter accessories.
What is the purpose of a plasma cutter in welding?
Just like a MIG or TIG welding machine, the plasma cutter is a highly valued device in industrial construction. We will focus particularly on the case of welding since that is where it is most commonly used. It is primarily used to dismantle or cut conductive metals (aluminium, copper, brass…). The particularity of the plasma cutter lies in its speed and precision. Plasma allows the cutter to operate with twice the speed and precision of a laser, regardless of the surface. Beyond this aspect, the plasma cutter, in addition to being effective, is less energy-hungry.
Important accessories for a plasma cutter
These small adaptable objects depending on the device are the main subject of this article. Above, we listed the main components of a plasma cutter: a compressor, a torch and a ground clamp. Furthermore, it would be worthwhile to elaborate on the various elements that make up the head of the cutter.
The plasma torch
This is without a doubt the most important plasma cutter accessory of the entire device. It conducts the plasma and comprises on its own at least 4 other elements essential to its operation.
The diffuser
Its role is to ensure perfect air regulation and flow uniformity. Remember to replace it whenever its holes become clogged. This will ensure the longevity of the device.
The nozzle
Since plasma can reach incredible temperatures and the plasma cutter torch is the element in contact with it, it is perfectly normal that this plasma cutter consumable has a cooling system. The nozzle is therefore the plasma cutter accessory that regulates the cooling air of the torch. If it becomes deformed under the effect of projected metals, you must replace it immediately.
The nozzle
This is a plasma cutter consumable made of pure leather that serves to confine the plasma produced towards the diffuser. Furthermore, it is very sensitive to impacts.
The skid
The skid is an object that welders use to maintain the gap between the sheet metal and the nozzle. However, once experience and dexterity are acquired, some welders prefer to do without this accessory.
The emissive electrode
Highly stressed, the emissive electrode is a pointed accessory. It is essential to the operation of the head of a plasma cutter.
How to choose a plasma cutter and which one to choose?
The first recommendation we can make is to choose your plasma cutter according to the project you wish to carry out. Once the criteria related to the project have been determined, you will more easily be able to target the right plasma cutter. One of the most determining criteria is your budget. It is based on your budget that you will determine which type of plasma cutter to buy. However, if your budget is limited, you can still afford a cutter. There are portable, compact models that are just as effective.
For your first purchase, we strongly recommend the portable plasma cutter with integrated compressor. Everything is designed to help you get familiar with the tool very quickly. Its weight, size, characteristics and non-bulky appearance will allow even beginners to cut sheet metal or profiles with great precision.
Precautions and usage tips
For a clean and well-made cut, it is essential that the welder's visibility is unobstructed. Furthermore, the operation generates ultraviolet rays that prevent good visibility of the cutting area. It is advisable to start by equipping yourself with a welding mask. The rest of the equipment is that conventionally used by a welder for any other welding operation: flexible gloves and a leather apron to protect yourself from metal spatter. Also remember to wear gaiters to protect your safety shoes.
The plasma cutter generally operates with air, but the latter can be replaced by nitrogen. If you use nitrogen, make sure to ventilate your workstation properly. There are options and features to best ensure your safety. The first one we offer is thermostatic protection. This is a measure that stops the device when it overheats or when an electrical incident occurs due to a voltage imbalance (overvoltage/undervoltage).
The second measure emits a signal when the voltage within the plasma torch begins to increase. It is this signal that allows the welder to know when to begin cutting. The last measure concerns High Frequency (HF) ignition of the pilot arc. This option allows the appropriate measure to be determined to start cutting without the nozzle and the metal to be worked being in contact.