Italy
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Gys
Reference: 059153
€55.93
47,00 € tax excl.
Fast delivery
2-year warranty
PORTABLE INSPECTION LAMP 400L
Bodywork Welder & Electric Dent Puller | EURO-WELDING
Refine your search
By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View my favorites
View as
Supplier stock
Reference: 075894
€76.16
64,00 € tax excl.
Fast delivery
2-year warranty
MINI 350L INSPECTION LAMP
Supplier stock
Gys
Reference: 056329
€29.75
25,00 € tax excl.
Fast delivery
2-year warranty
JUMP START CABLES 320A - 16MM2 - 3M
Supplier stock
Reference: 072411
€57.12
48,00 € tax excl.
Fast delivery
2-year warranty
SOLAR BATTERY MAINTENANCE KIT 4.5W
Supplier stock
Reference: 079694
€464.10
390,00 € tax excl.
or 4 x 116,03 €
Free delivery
2-year warranty
EV CHARGING CABLE T2/T2 5M - 32A1PH
Supplier stock
Reference: 079687
€345.10
290,00 € tax excl.
or 4 x 86,28 €
Free delivery
2-year warranty
EV CHARGING CABLE T2/T2 5M - 32A1PH
Supplier stock
Gys
Reference: 082816
€702.10
590,00 € tax excl.
or 4 x 175,53 €
Free delivery
2-year warranty
STARTRONIC SUPERCAP 12/24V
Supplier stock
Gys
Reference: 026117
€345.10
290,00 € tax excl.
or 4 x 86,28 €
Free delivery
2-year warranty
STARTRONIC HYBRID 950
Supplier stock
Reference: 079410
€220.15
185,00 € tax excl.
or 3 x 73,38 €
Free delivery
2-year warranty
18V - 100W SOLAR PANEL
Supplier stock
Gys
Reference: 085206
€1,463.70
1 230,00 € tax excl.
or 4 x 365,93 €
Free delivery
2-year warranty
POWER PACK 14.22
Supplier stock
Gys
Reference: 027961
€595.00
500,00 € tax excl.
or 4 x 148,75 €
Free delivery
2-year warranty
POWER PACK 520
Supplier stock
Gys
Reference: 025844
€476.00
400,00 € tax excl.
or 4 x 119,00 €
Free delivery
2-year warranty
GYSPACK HERITAGE 6/12V
Supplier stock
Gys
Reference: 027862
€333.20
280,00 € tax excl.
or 4 x 83,30 €
Free delivery
2-year warranty
GYSPACK 660
Supplier stock
Gys
Reference: 026322
€214.20
180,00 € tax excl.
or 3 x 71,40 €
Free delivery
2-year warranty
GYSPACK AIR
Supplier stock
Gys
Reference: 026469
€511.70
430,00 € tax excl.
or 4 x 127,93 €
Free delivery
2-year warranty
STARTIUM 330E - 12/14V
Supplier stock
Gys
Reference: 026049
€267.75
225,00 € tax excl.
or 3 x 89,25 €
Free delivery
2-year warranty
GYSFLASH 20.12/24 PL
Supplier stock
Gys
Reference: 026926
€222.53
187,00 € tax excl.
or 3 x 74,18 €
Free delivery
2-year warranty
GYSFLASH 18.12 PL
Supplier stock
Gys
Reference: 029460
€103.53
87,00 € tax excl.
Fast delivery
2-year warranty
GYSFLASH 6.24
Supplier stock
Gys
Reference: 026902
€60.69
51,00 € tax excl.
Fast delivery
2-year warranty
GYSFLASH 1.12 PL
Supplier stock
Gys
Reference: 023253
€71.40
60,00 € tax excl.
Fast delivery
2-year warranty
TCB 60 Charger - 12V
In stock
Telwin
Reference: 803152
€167.59
140,83 € tax excl.
or 3 x 55,86 €
Free delivery
2-year warranty
2 straight arms length 250 mm + 2 electrodes 690047 AND 690050 Telwin XA 2 Modular 20/TI Modular 230 and 400 Kit
Supplier stock
Gys
Reference: 080935
€183.46
154,17 € tax excl.
or 3 x 61,15 €
Free delivery
2-year warranty
Supplier stock
Gys
Reference: 081000
€1,922.84
1 615,83 € tax excl.
or 4 x 480,71 €
Free delivery
2-year warranty
The CAPATEK 66 FV is an industrial capacitor discharge stud welder with drawback, capable of welding studs from M3 to M8 in copper-coated steel, stainless steel, aluminum and brass onto thin sheet metal without marks or deformation. Its ergonomic and revolutionary gun with adjustable drawback and force ensures an ultra-fast welding rate. Its "FV" technology allows it to be used on all single-phase networks (85 to 265 V).
MAXIMUM PRODUCTIVITY
66 mF capacitor discharge.
Recharge time from 0 to 5 s.
Wide choice of studs, from M3 to M8.
Compatible stud length: 6 to 40 mm.
CONTACT GUN
Adjustable force from 25 to 100 N with cover to prevent accidental adjustments.
Independent tripod design with bayonet locking for better gun stability during welding and to facilitate mandrel installation
Trigger for easy control of the welding action.
LED lighting for the welding area. Unique on the market, several functions:
- Fast LED flash: error, machine under load.
- Slow LED flash: preset stud count reached.
INTUITIVE INTERFACE
Voltage adjustment from 50 V to 200 V.
Settings lock.
Stud counter with adjustable threshold (incremental or decremental).
INDUSTRIAL DESIGN
Protected against overvoltages up to 400 V (PROTEC 400)
Reinforced casing with anti-shock pads on all external faces
Easy welding polarity change via 35/50 bayonet connector
Delivered with two split earth clamps to prevent magnetic arc blow effects
Handle with integrated mains cable winder
Automatic standby mode
ON/OFF switch located at the rear of the machine
Active ventilation as needed
In stock
Telwin
Reference: 803154
€209.24
175,83 € tax excl.
or 3 x 69,75 €
Free delivery
2-year warranty
1 straight arm length 350 mm + 1 curved arm length 350 mm + 2 inclined electrodes Ø 12mm for Telwin spot welder
Telwin XA 8 kit
Modular 20/TI
Modular230 and 400
In stock
Gys
Reference: GYSPOT 34.02-34.04
€1,165.20
979,16 € tax excl.
or 4 x 291,30 €
Free delivery
2-year warranty
The GYSPOT 34.02 and 34.4 have a power of 3500 A. These dent pullers are tools for dent repair and straightening of steel body panels (hood, door, roof, etc.). They feature several functions that make them complete and versatile tools. Thanks to its low power consumption, this nail puller model is powered by a simple 230 V outlet for the 34.02 model
We offer it in two versions: Single-phase 230 V (reference 065741) and three-phase 400 V (reference 067943)
A MULTI-FUNCTION DENT PULLER
Operating modes: • Welding of stars or rings for steel sheet pulling operations.
• Welding of corrugated wire, ideal for straightening a rounded profile (e.g.: wheel arch)
• Shrinking, for light impacts and finishing work.
• Use of the graphite pencil. • Welding of steel studs.
EASY TO USE
• Switch to toggle to graphite pencil mode.
• Intuitive, the potentiometer allows you to select both the power and the desired mode.
• Manual, the weld is generated by a simple press of the gun trigger.
It comes with an inertia hammer fitted with a star tip, nail puller + 3 stars - 1 shrinking tip and a ground pad
Cable lengths:
Ground: Section 50mm² - length 1.7 m
Gun: Section 50 mm² - length 2 m
| Combinations | Price | |
| €1,164.21 | ||
| €1,165.20 | ||
In stock
Gys
Reference: 053564
€292.54
245,83 € tax excl.
or 3 x 97,51 €
Free delivery
2-year warranty
Double-action dent pulling bar as it can also be used as a lever Length 86 cm
In stock
Telwin
Reference: 823017
€1,065.05
895,00 € tax excl.
or 4 x 266,26 €
Free delivery
2-year warranty
This portable spot welding system is the ideal tool for assembling thin mild steel sheets such as metal furniture or vehicle restoration
Thanks to the selection of the thickness of the sheets to be assembled, the portaspot defines the optimal current and spot welding time. You can also manually adjust this spot welding time
It allows the assembly of sheets from 0.6 + 0.6 mm up to 2.0 + 2.0 mm
The spot mode is continuous or pulsed depending on the type of sheet
It features clamping force adjustment on the arm and has a handle made of thermal insulating material
Its power supply is three-phase 400 V and requires for its operation an electrical line controlled by a 16 A fuse
Supplied with the standard 120 mm arm
Welder weight 10.5 kg
The arms of this device have a diameter of 20 mm and the electrodes have a diameter of 12 mm
Supplied without power plug.
Supplier stock
Gys
Reference: 056992
€2,915.50
2 450,00 € tax excl.
or 4 x 728,88 €
Free delivery
2-year warranty
The POWERDUCTION 37LG induction unit provides immediate heating power for loosening, heating steel or aluminium. Light and portable, it can heat metal parts for several minutes without interruption thanks to its liquid cooling system.
The ideal tool in mechanics and maintenance:
• loosening steering tie rods (wheel alignment)
• removal of seized wiper blades, spare wheel carriers
• freeing seized bolts, steering ball joints without damaging the boot
• removal of seized driveshafts in the hub. • removal of car or HGV exhaust lines. • separation of bonded steel or aluminium components
Supplied complete, pre-assembled with 1 x 90° heating inductor
• Heating power: 3700 W, selectable in 250 W increments. Heats to the core of the metal, to a depth of 6 mm. Brings to red heat (approx. 1000°C)
Water cooling
Tank capacity: 1.5 L
• Safety and time saving: Immediate flameless heating on a precise area, allowing work near cables, pipes, or any heat-sensitive parts without dismantling them
• Portable unit: For use in hard-to-reach places. Supplied with a 2-metre induction cable
Supplier stock
Gys
Reference: 062504
(2 reviews)
€782.43
657,50 € tax excl.
or 4 x 195,61 €
Free delivery
2-year warranty
The Powerduction 10R is designed to heat, loosen and easily remove all mechanical parts in a matter of seconds: seized bolts/nuts, screws...etc. It is particularly recommended in the automotive, agricultural, maintenance, metal construction and locksmithing sectors
• Immediate flameless heating on a precise area, allowing work near cables, pipes, or any heat-sensitive part without dismantling them
• Handy: featherlight at 3.5 kg – 1.3 kg for the inductor alone
• Ergonomic: compact size and shoulder strap
• Easy to use: can be connected anywhere with a single-phase 230 V outlet
• Quick start: select and fit the inductor, plug in and use
• 1200 W power with high duty cycle:
Supplier stock
Gys
Reference: 021990
€1,533.36
1 288,58 € tax excl.
or 4 x 383,34 €
Free delivery
2-year warranty
Welding of M4, M5 and M6 studs by capacitor discharge
The GYSPOT ALU PRO FV unit is dedicated to straightening ALUMINIUM body panels. The unit welds studs to eliminate dents and impacts (door panel, bonnet, etc.) without stripping the interior
Microprocessor controlled
- Voltage (adjustable from 50 V to 200 V)
- Power (adjustable from 0 to 10)
- Automatic stud presence detection
Capacitor discharge 66 mF Fast welding (3 milliseconds)
Automatic gun:
The gun has no trigger; welding is triggered automatically when the tip slides into the gun. The ground is integrated into the gun
Supplied with:
- Automatic gun with 3 integrated ground pins. These ground pins are made of brass and their arrangement provides better stability of the gun during welding
- Aluminium dent repair accessory box (M4 studs, pulling rings, pull rod)
- Chuck for Ø 4 mm studs
The GYSPOT ALU PRO FV is protected against mains overvoltages up to 400 V
Operates at a supply voltage between 85 and 265 V. Thanks to its latest-generation "flexible voltage" switching power supply, the GYSPOT PRO FV can be connected to a 230V - 2A outlet
I² MAX 13,000 A
In stock
Gys
Reference: SPIRALE
€47.60
40,00 € tax excl.
Fast delivery
2-year warranty
| Combinations | Price | |
| €47.60 | ||
| €47.60 | ||
| €47.60 | ||
In stock
Telwin
Reference: 803159
€178.00
149,58 € tax excl.
or 3 x 59,33 €
Free delivery
2-year warranty
2 straight arms length 140 mm + 1 straight electrode length 215 mm and 1 curved electrode for Telwin spot welder
Telwin XA 5 kit
Modular 20/TI
Modular 230 and 400
Save 20%
In stock
Gys
Reference: 056923
(1 review)
€391.71
€489.64
329,17 € tax excl.
or 4 x 97,93 €
Free delivery
2-year warranty
The Hand-Duction is designed to heat, loosen and easily remove all mechanical parts in a matter of seconds: seized bolts/nuts, screws...etc. It is particularly recommended in the automotive, agricultural, industrial and construction industry sectors
An ergonomic tool
Lightweight, it weighs only 2.54 kg
Its pistol shape provides an excellent grip
Equipped with an LED at its tip, it illuminates the area to be heated
Easy to use, simply plug it in and use it
With a power of 1000 W, the Hand-Duction also features an air cooling circuit. ... WHICH OFFERS A CONSIDERABLE TIME SAVING
A considerable time saving
Immediate flameless heating on a precise area, allowing work close to cables, pipes, or any heat-sensitive part without removing them
Supplied with three inductors, it can be adapted to all kinds of parts. Changing the inductor is very simple via a locking/unlocking system at the end of the product
STANZANI
Reference: 125
€77.35
65,00 € tax excl.
Fast delivery
2-year warranty
Large-size easel, height-adjustable via a small chain
Maximum opening width: 1 m
Support arms fitted with protective foam
In stock
STANZANI
Reference: 00135000
€152.71
128,33 € tax excl.
or 3 x 50,90 €
Free delivery
2-year warranty
Pulling capacity 6 tons
Jaw width: 90 mm
Weight 3.8 kg
In stock
STANZANI
Reference: 00121000
€166.60
140,00 € tax excl.
or 3 x 55,53 €
Free delivery
2-year warranty
SKUBA forged steel pulling clamp
This clamp allows pulling up to 6 tons
Jaw width 55 mm
In stock
STANZANI
Reference: 00134000
€204.29
171,67 € tax excl.
or 3 x 68,10 €
Free delivery
2-year warranty
This self-locking clamp does not require screw fixing on the sheet metal body
Pulling force 10 tons
Weight 5 kg
In stock
STANZANI
Reference: 00175000
(1 review)
€87.26
73,33 € tax excl.
Fast delivery
2-year warranty
Dent pulling lever for quick and cost-effective repair of small dents on your bodywork
Supplier stock
STANZANI
Reference: 00171A00
€150.74
126,67 € tax excl.
or 3 x 50,25 €
Free delivery
2-year warranty
Aluminum hammer head, jaw pull width 45 mm
This tool allows repairs in hard-to-reach positions
Compatible with steel or aluminum plates (3 sizes for each material available on the site)
Weight 3.7 kg
STANZANI
Reference: 00156A00
(1 review)
€71.40
60,00 € tax excl.
Fast delivery
2-year warranty
Aluminum sheet metal clamp with 3 steel plates for welding
Pull handle width: 45 mm
Practical, lightweight, offers great safety and guarantees pulling force
Suitable for steel and/or aluminum sheet metal repairs, thanks to the specific plates
Supplier stock
STANZANI
Reference: 157
(1 review)
€11.70
9,83 € tax excl.
Fast delivery
2-year warranty
| Combinations | Price | |
| €11.70 | ||
| €13.89 | ||
| €15.08 | ||
In stock
STANZANI
Reference: 157A
€17.46
14,67 € tax excl.
Fast delivery
2-year warranty
| Combinations | Price | |
| €17.46 | ||
| €18.65 | ||
| €19.43 | ||
In stock
STANZANI
Reference: CS050000
(2 reviews)
€21.81
18,33 € tax excl.
Fast delivery
2-year warranty
This magnetic holder keeps the corrugated wire in place before making the tack welds
In stock
Gys
Reference: 052222
€1,010.51
849,21 € tax excl.
or 4 x 252,63 €
Free delivery
2-year warranty
This dent puller has a power of 3800 A
It runs on a 16A outlet and a 400 V power supply
It allows:
The welding of studs, rings or rivets.
It features a "shrinking" function, sheet metal heating pen
It can be used as a nail puller with star attachments
Only 2 parameters to select:
• the power level (among 11 levels)
• the tool used (among 7 tools) => No need to set the time and intensity anymore. Automatic ignition system The weld spot is automatically generated by a simple contact between the tool and the panel to be straightened
It is supplied with a slide hammer + 1 box of accessories
Cable lengths:
Ground: Section 70 mm² - length 2 m
Gun: Section 70 mm² - length 2 m
In stock
Gys
Reference: 052215
(2 reviews)
€1,096.60
921,55 € tax excl.
or 4 x 274,15 €
Free delivery
2-year warranty
This dent puller has a power of 3800 A
It runs on a 16A outlet and a 230 V power supply
It allows:
The welding of studs, rings or rivets.
It features a "shrinking" function, sheet metal heating pen
It can be used as a nail puller with star attachments
Only 2 parameters to select:
• the power level (among 11 levels)
• the tool used (among 7 tools) => No need to set the time and intensity anymore. Automatic ignition system The weld spot is automatically generated by a simple contact between the tool and the panel to be straightened
It is supplied with a slide hammer + 1 box of accessories
Cable lengths:
Ground: Section 70 mm² - length 2 m
Gun: Section 70 mm² - length 2 m
In stock
Gys
Reference: 041561
(5 reviews)
€6.45
5,42 € tax excl.
Fast delivery
2-year warranty
Bags of 200 nails to use with the stud welding nozzle 041523
Supplier stock
Telwin
Reference: 803045
(1 review)
€827.05
695,00 € tax excl.
or 4 x 206,76 €
Free delivery
2-year warranty
This arm kit is compatible with Telwin spot welder models
Digital 7000 - Digital 9000 and 9000 qua
Modular 230 and 400
It includes arm kits XA3 - XA4 - XA6 - XA 7 AND XA9
Supplier stock
Telwin
Reference: INDUCTOR 5000
€295.51
248,33 € tax excl.
or 3 x 98,50 €
Free delivery
2-year warranty
SUPER REMOVER
Quick removal of glass on parts to be painted
Allows reuse of glass with integrated trims
PAD INDUCTOR
Quickly removes Stickers, Graphics, Logos, Labels, Data plates, Mouldings, Side plastics, Car roofs, Interior trims...
WONDER PEN
Acts on dents caused by hail without removing the paint
Extension for WONDER PEN
Adds to the WONDER PEN in order to facilitate access to certain parts of the vehicle
TWISTER HORIZONTAL
To unlock bolts or nuts of Ø M8/M10
TWISTER WIRES
2 copper shims of 550 mm in length for heating parts of various sizes
It is necessary to make 3 turns with the wire around the part for the heating to work correctly
METAL RELEASER
For unlocking bolts and nuts using induction heating
The Remote Control pedal is required to use it
| Combinations | Price | |
| €53.55 | ||
| €295.51 | ||
| €218.02 | ||
| €227.09 | ||
| €267.61 | ||
| €58.51 | ||
| €51.37 | ||
| €53.55 | ||
Supplier stock
Telwin
Reference: 835012
(1 review)
€1,185.21
996,00 € tax excl.
or 4 x 296,30 €
Free delivery
2-year warranty
This induction heating system allows in particular to:
- Remove all adhesives, logos, strips, mouldings
- Remove bonded glazing while preserving the trim (rear window, quarter window, panoramic roof…)
- Remove anti-gravel coatings and seals
- Loosen and free mechanical parts (bolts, screws, spark plugs, injectors…)
- Remove minor dents from bodywork without needing to repaint (hail damage)
It is particularly suitable for bodywork and guarantees considerably reduced intervention times
It intelligently and completely automatically adjusts its intensity (Smart Power) using an innovative AutoCheck microprocessor system
Using the principle of electromagnetic induction, it can transfer a large amount of heat to a specific area (Smart Protection) in just a few seconds. In this way, glass, rubber, plastic and painted surfaces are not damaged in the area being treated or even in the surrounding areas
Delivered with bolt heater for Ø m8/m10 and M12/M14
In stock
Telwin
Reference: 803156
(3 reviews)
€296.51
249,17 € tax excl.
or 3 x 98,84 €
Free delivery
2-year warranty
2 right arms length 500 mm Ø 20 mm + 2 straight electrodes Ø 12mm for Telwin digital Spotter 9000 spot welder
Kit Telwin XA 9
In stock
DECA
Reference: 010764
€7.89
6,63 € tax excl.
Fast delivery
2-year warranty
Crushing electrode to erase the weld tip created by the star
Supplier stock
Telwin
Reference: 802832
(1 review)
€381.79
320,83 € tax excl.
or 4 x 95,45 €
Free delivery
2-year warranty
This inertia hammer kit for bodywork is used with the following Telwin welding machines:
Spotter 5500
Spotter 7000
Spotter 9000
It includes:
1 hammer
1 ground clamp
1 accessory case
Supplier stock
Gys
Reference: 050037
(4 reviews)
€63.17
53,08 € tax excl.
Fast delivery
2-year warranty
This kit includes
- 1 electrode for corrugated wire
- 25 corrugated wires
- 1 electrode for rings
- 50 straight pulling rings
- 1 pulling rod
Supplier stock
Gys
Reference: 052178
(3 reviews)
€1,284.46
1 079,42 € tax excl.
or 4 x 321,12 €
Free delivery
2-year warranty
This 3800 A dent puller operates on a 16 A outlet
Only 2 parameters to select:
• the power level (from 11 levels)
• the tool used (from 7 tools)
=> No more need to set the time and intensity
Manual ignition system
The weld spot is generated by pulling the trigger when the tool is in contact with the part to be straightened
Automatic ignition system
The weld spot is generated automatically by simple contact between the tool and the part to be straightened
It comes with:
1 ground clamp 70 mm² (2 m cable)
2 multi-function guns (70 mm² cable, length 2 m + 3 m)
Inertia hammers
Use as nail puller with stars
Stud, rivet and ring welding
Shrinking, pencil and sheet metal heating functions
1 mains power cable 8 m long
1 accessories box including:
20 copper-protected nail puller stars
1 washer electrode
50 washers
1 ground hook
1 carbon electrode
1 star chuck for inertia hammer
1 hex key
1 heating spot electrode
1 electrode for threaded rivets
1 electrode for rivets
50 studs Ø 5 x 18 mm
50 threaded rivets Ø 5 x 18 mm
50 threaded rivets Ø 5 x 12 mm
100 rivets Ø 3 x 3.25 mm
100 rivets Ø 3 x 4.50 mm
Supplier stock
Telwin
Reference: 823195
€4,151.91
3 489,00 € tax excl.
Free delivery
2-year warranty
This spot welding system is the tool for assembling thin sheets of mild steel or stainless steel such as metal furniture or automotive restoration and repair
The multifunction digital display allows automatic regulation of the spot welding parameters depending on the tool selected and the sheet thickness
This unit enables individual and continuous welding of steel sheets, stainless steel, and galvanized sheets in pulsed mode
With the optional studder kit reference 802833, it enables spot welding of screws, washers, nails, rivets, washer spot welding and pulling, and intermittent spot welding
Automatic control of the mounted tool and voltage
It allows the assembly of sheets up to a thickness of 3.0 + 3.0 mm
The spot welding mode is continuous or pulsed depending on the type of sheet
It features an adjustable clamping force on the arm and a thermally insulating material handle
Single-phase 400 V power supply with a 32 A fuse socket
Supplied with a pneumatic clamp with air cooling and the standard 120 mm arm
In stock
Telwin
Reference: 803155
(11 reviews)
€157.68
132,50 € tax excl.
or 3 x 52,56 €
Free delivery
2-year warranty
2 straight arms length 120 mm + 2 inclined electrodes Ø 12mm for Telwin spot welder
Telwin XA 4 Kit
Modular 20/TI
Modular230 and 400
In stock
Telwin
Reference: 803153
(11 reviews)
€220.15
185,00 € tax excl.
or 3 x 73,38 €
Free delivery
2-year warranty
2 straight arms length 350 mm Ø 25 mm + 2 angled electrodes Ø 12mm for Telwin spot welder
In stock
Telwin
Reference: 803151
€77.35
65,00 € tax excl.
Fast delivery
2-year warranty
2 straight arms length 120 mm + 2 straight electrodes Ø 12mm length 100 mm for Telwin spot welder
In stock
Telwin
Reference: 803150
(8 reviews)
€126.94
106,67 € tax excl.
Free delivery
2-year warranty
2 straight arms length 120 mm + 2 angled electrodes Ø 12 mm length 100 mm for Telwin spot welder
Telwin XA 2 Kit
Modular 20/TI
Modular 230 and 400
In stock
Telwin
Reference: 6900
(6 reviews)
€6.70
5,63 € tax excl.
Fast delivery
2-year warranty
Straight electrode Ø 12mm for Telwin spot welder
Modular 20/TI
Modular 230 and 400
| Combinations | Price | |
| €10.76 | ||
| €13.89 | ||
| €19.79 | ||
| €6.70 | ||
In stock
Telwin
Reference: 690051
(23 reviews)
€28.76
24,17 € tax excl.
Fast delivery
2-year warranty
Inclined electrode Ø 12mm with clamp for Telwin spot welder
Modular 20/TI
Modular230 and 400
This inclined electrode fits on the arms for inclined electrodes length 120 mm Telwin reference 690040
In stock
Telwin
Reference: 802034
(2 reviews)
€193.38
162,50 € tax excl.
or 3 x 64,46 €
Free delivery
2-year warranty
This dent pulling kit for bodywork is used with the following Telwin welders:
Technomig 180 DUAL SYNERGIC and 180 EURO
Technomig 210 DUAL SYNERGIC - Technomig 215 DUAL SYNERGIC
Telmig 170/1-180/2-195/2-200/2-203/2-250/2-251/2
Mastermig 220/2-270/2
Electromig 220
It includes:
100 studs
1 puller
2 stud pointing nozzles
In stock
Telwin
Reference: 690012
(14 reviews)
€6.20
5,21 € tax excl.
Fast delivery
2-year warranty
| Combinations | Price | |
| €12.40 | ||
| €6.20 | ||
In stock
Telwin
Reference: 823016
(31 reviews)
€986.71
829,17 € tax excl.
or 4 x 246,68 €
Free delivery
2-year warranty
This portable spot welding system is the ideal tool for assembling thin mild steel sheets such as metal furniture or vehicle restoration
Thanks to the selection of the thickness of the sheets to be assembled, the portaspot defines the optimal current and spotting time. You can also manually adjust this spotting time
It allows the assembly of sheets from 0.6 + 0.6 mm up to 2.0 + 2.0 mm
The spotting mode is continuous or pulsed depending on the type of sheets
It features a clamping force adjustment on the arm and a handle made of thermal insulating material
Its power supply is single-phase 230 V and requires for its operation an electrical line controlled by a 25A fuse
Supplied with the standard 120 mm arm
Welder weight: 10.5 kg
The arms of this unit have a diameter of 20 mm and the electrodes a diameter of 12 mm
Supplied without power plug
In stock
Gys
Reference: 049468
(2 reviews)
€8.27
6,95 € tax excl.
Fast delivery
2-year warranty
5 carbon electrodes sheet metal heating Ø 10 mm Length 300 mm
Weight 200 grams (set of 5)
In stock
Gys
Reference: 053922
(6 reviews)
€35.20
29,58 € tax excl.
Fast delivery
2-year warranty
This kit includes:
- 20 copper-protected nail-puller stars
- 1 washer electrode
- 50 washers
- 1 earth hook
- 1 carbon electrode
In stock
Telwin
Reference: 722955
(1 review)
€16.76
14,08 € tax excl.
Fast delivery
2-year warranty
Washer Hook
In stock
STANZANI
Reference: 010772
€11.90
10,00 € tax excl.
Fast delivery
2-year warranty
20 or 50 stars for nail puller (dent puller)
| Combinations | Price | |
| €11.90 | ||
| €24.79 | ||
Save 10%
Supplier stock
Gys
Reference: 055353
(33 reviews)
€491.10
€545.66
412,72 € tax excl.
or 4 x 122,78 €
Free delivery
2-year warranty
This stud puller with a power of 2600 A allows:
Welding of rings or stars to pull out dented panels
Welding of corrugated wire to straighten a wheel arch or a rounded shape
Shrinking of light impacts and finishing work with a graphite pencil
This straightening unit operates on a 16 A outlet
Delivered with a 1.1 kg slide hammer and star tip stud puller, 3 stars, 1 shrinking tip and 1 ground pad
Easy to use, a switch allows switching to graphite pencil mode
The potentiometer allows selecting both the power and the desired mode
The weld spot is generated by simply pressing the trigger of the gun
Cable lengths:
Ground: 1m70
Gun: 1m80
Power supply: 2m
Optional:
Consumable box for Gyspot 27.02 reference 053922
In stock
Gys
Reference: 050655
€29.55
24,83 € tax excl.
Fast delivery
2-year warranty
Washer holder electrode
DECA
Reference: 010312
€77.35
65,00 € tax excl.
Fast delivery
2-year warranty
Dent pulling lever + 3-hook claw DECA
Length 70 cm
In stock
Telwin
Reference: 742485
(1 review)
€12.50
10,50 € tax excl.
Fast delivery
2-year warranty
Electrode for welding corrugated wires for dent puller
In stock
STANZANI
Reference: 010958
(5 reviews)
€5.36
4,50 € tax excl.
Fast delivery
2-year warranty
Crimped wires for dent puller
Pack of 10 50 pieces
Length 28 cm
| Combinations | Price | |
| €5.36 | ||
| €23.80 | ||
In stock
DECA
Reference: 010923
€25.59
21,50 € tax excl.
Fast delivery
2-year warranty
Magnetic support for corrugated wires for dent puller (supplied without corrugated wire)
Telwin
Reference: 816284
€2,874.79
2 415,79 € tax excl.
or 4 x 718,70 €
Free delivery
2-year warranty
TECHNOMIG 223 TREO SYNERGIC 230V TELWIN WELDING MACHINE
Inverter multiprocess welding machine MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift controlled by microprocessor.
Particularly designed for bodywork applications, it allows immediate use of three different torches, two traditional MIG torches and one spool gun.
This feature enables direct intervention on different materials without needing to replace the torch and wire spool.
The traditional MIG torches are designed for welding steel, high-strength HLE steels, as well as stainless steel and braze-welding of galvanised sheets; the spool gun torch is specifically designed for aluminium even at a significant distance from the generator.
The SYNERGIC quick adjustment of welding parameters, thanks to ONE TOUCH LCD SYNERGY technology, makes the product very easy to use.
ATC technology, Made in Telwin, makes it easy to achieve excellent welds on thin thicknesses thanks to advanced arc control. It is also possible to intervene manually on arc length: this adjustment allows the shape of the weld bead to be modified according to the welder's style.
The ONE TOUCH LCD graphic display enables better reading of all welding parameters.
Characteristics:
- 17 pre-set synergic curves
- LCD screen display of welding parameters
- 2/4 stroke, spot operation selection
- Thermostatic, overvoltage, undervoltage, overcurrent, motor-generator protections (+/- 15%).
Supplied with:
1x Cable with earth clamp (3 metres) 16 mm² - 10/25 connectors
1x MIG torch MB15 STEEL (3 metres) Euro connector
1x MIG torch MB15 ALU (3 metres) - Euro connector
1x SPOOL GUN torch M6
1x Gas hose
1 Set of 2 drive rolls for steel or stainless wire Ø 0.6 / 0.8 mm (mounted on the machine).
User manual
2-YEAR WARRANTY
In stock
Gys
Reference: 032903
(7 reviews)
€1,487.50
1 250,00 € tax excl.
or 4 x 371,88 €
Free delivery
2-year warranty
SEMI-AUTOMATIC WELDING MACHINE (MIG/MAG)
Ideal for maintenance and automotive body repair work.
Adjustment range from 15 to 160A
For wire diameter 0.6 to 1mm: steel, stainless steel and aluminium
Simple and fast adjustment: in synergic mode, the machine automatically sets the ideal wire speed.
Expandable, it can be fitted with a spool gun torch
3 available modes:
Standard (2T).
- Spot, plug welding function.
- Delay, stitch point function.
Delivered with:
1 150A torch length 3 m, fitted with a Ø 0.8 mm contact tip.
1 200 A earth clamp cable length 3 m
1 reversible roller for steel wire Ø 0.6/0.8 mm.
Save 20%
In stock
Telwin
Reference: 816057
(4 reviews)
€1,036.43
€1,295.53
870,97 € tax excl.
or 4 x 259,11 €
Free delivery
2-year warranty
This tri-process machine allows you to weld in MMA, semi-automatic (MIG-MAG) and TIG mode with a single unit.
MMA (electrode) and TIG welding solutions are available as options.
As standard, this semi-automatic machine has 17 programmed positions. The user simply selects the type of metal and the wire Ø. It is also possible to weld in manual mode by directly adjusting the setting parameters.
This welding machine uses spool wire for welding. This welding process allows welding of thin materials (0.6 mm).
Very practical on thin sheet metal (automotive body panels, chassis...), it avoids the weld bead restart that occurs when changing an electrode.
With the addition of a shielding gas, this machine allows welding of aluminium, stainless steel and steel in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.
Using a suitable CU Si3 type wire, it enables welding of HSS, EHS, UHS steels (automotive body panels)
MIG welding under gas shielding requires the use of pure Argon gas for welding aluminium or an Argon + CO² mixture for steel and stainless steel.
Special case: For steel, it is possible not to use gas when using flux-cored wire (this allows, for example, easier outdoor use). In this case the thickness of the steel sheets must not be less than 1 mm without risk of burn-through.
This machine uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). Optionally, an adapter for Ø 100 mm spools is available.
Upon delivery this machine includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless wire Ø 0.6 and 0.8 mm.
1 steel/stainless contact tip Ø 0.8 mm
1 gas hose for refillable cylinder length 1 m
TIG welding under gas shielding requires the use of pure Argon gas for welding steel, stainless steel, ferrous alloys and copper....
Optional:
It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes of Ø 1.6 mm to 4 mm.
Reference KIT000514
It is possible to add a TIG torch with a length of 4 m in order to weld in TIG mode using pure Argon shielding gas.
Save 10%
In stock
Gys
Reference: 065109
(16 reviews)
€1,244.53
€1,382.82
1 045,83 € tax excl.
or 4 x 311,13 €
Free delivery
2-year warranty
Welds steel, stainless steel and aluminum from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6/0.8 to 1.6 mm and aluminum 0.8 to 1.6mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- DC TIG Lift - Lift arc ignition
- MMA (basic and rutile electrode up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and highly intuitive settings
Compatible with 9 kVA generator and 100m extension cord
Single-phase power supply 230 V - 16 A
Dimensions: 27.5 x 55 x 44 cm - 20kg
IP21 rating
Supplied with:
1x 250 A 3m torch MB25
1x 200A 2.5m ground cable
1x MMA electrode holder 2m
1x User manual
2x 0.8/1mm drive rolls
TIG torch optional
In stock
STANZANI
Reference: 010990
(1 review)
€4.96
4,17 € tax excl.
Fast delivery
2-year warranty
Bag of 10 or 50 notched flat washers for dent puller
| Combinations | Price | |
| €4.96 | ||
| €23.80 | ||
In stock
STANZANI
Reference: 010991
€6.94
5,83 € tax excl.
Fast delivery
2-year warranty
Pack of 10 notched washers for DECA dent puller
| Combinations | Price | |
| €6.94 | ||
| €23.80 | ||
Save 10%
Supplier stock
Telwin
Reference: 829564
€82.31
€91.45
69,17 € tax excl.
Fast delivery
2-year warranty
Multifunction 12V lithium jump starter and power bank. Equipped with: USB A output for recharging electronic devices (smartphones, tablets, etc.); USB C input for recharging the device; high-intensity LED lamp with thre
Save 10%
Supplier stock
Telwin
Reference: 829568
€129.91
€144.35
109,17 € tax excl.
Free delivery
2-year warranty
Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1250 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Quick r
Save 10%
In stock
Telwin
Reference: 829569
€151.73
€168.59
127,50 € tax excl.
or 3 x 50,58 €
Free delivery
2-year warranty
Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1500 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Quick r
Save 10%
Supplier stock
Telwin
Reference: 829574
€182.47
€202.74
153,33 € tax excl.
or 3 x 60,82 €
Free delivery
2-year warranty
Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1500 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Wireless i
Save 10%
Supplier stock
Telwin
Reference: 829575
€186.44
€207.16
156,67 € tax excl.
or 3 x 62,15 €
Free delivery
2-year warranty
Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1800 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Compresso