Italy
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
Reference: 802955
Automatic plasma torch length 12 m - with consumables
€927.21
779,17 € tax excl.
Supplier stock
Dispatched within 5 to 7 days
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
Description
Important
The torch must be fitted with the correct consumables, chosen according to the application and the set current. A poor choice of consumable will cause cutting defects, premature wear of consumables and even malfunction of the entire unit.
Regularly check the wear condition of the protective nozzle, the tip and the electrode, or in the event of a significant reduction in cutting speed. It is recommended to replace the tip and electrode at the same time.
Consumables are wear parts; it is important to know when to replace them. Visually: melted or damaged consumables, nozzle holes>1.5mm, worn electrodes, melted pads… Practically: loss of cutting performance, difficult arc starting on workpiece, etc.
Regarding the nozzle: Tighten the nozzle so that all parts are firmly locked. The nozzle should not turn easily.
Use compressed air with oil and water filtration.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Supplier stock
Telwin
Reference: 804041
€589.05
495,00 € tax excl.
or 4 x 147,26 €
Free delivery
2-year warranty
This manual plasma torch TWIN PV is suitable for the TELWIN plasma cutter: Superior Plasma 70
It is supplied with a 70 A nozzle.
Length: 6 m
- PV torch for plasma cutting system with 4-metre cable (EURO connection).
- Maximum current 65 A@60% / 50 A@100%.
- Maximum cutting thickness 20 mm.
- Equipped with an air cooling system (pressure 5 bar and flow rate 200-220 litres/min).
In stock
Gys
Reference: 037595
(2 reviews)
€44.23
37,17 € tax excl.
Fast delivery
2-year warranty
5 gouging nozzles 70 A for plasma torch MT-70
In stock
Gys
Reference: 039988
(1 review)
€326.26
274,17 € tax excl.
or 4 x 81,57 €
Free delivery
2-year warranty
This CNC interface kit is installed between your Plasma cutter and a numerically controlled cutting table
This kit is compatible with Gys brand plasma cutters whose model names are listed below:
Plasma 45-70-85-105-125
In stock
Telwin
Reference: 804417
(2 reviews)
€98.18
82,50 € tax excl.
Fast delivery
2-year warranty
This kit includes:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
In stock
Lincoln Electric
Reference: W03X0893-25A
€38.18
32,08 € tax excl.
Fast delivery
2-year warranty
5 medium electrodes for Lincoln LC 65 plasma torch.
Suitable for the Tomahawk 1025 plasma cutter model
Supplier stock
Lincoln Electric
Reference: W03X0893-115A
€583.10
490,00 € tax excl.
or 4 x 145,78 €
Free delivery
2-year warranty
This kit for Lincoln LC 105 manual torch
It contains:
- 1 nozzle
- 1 gouging nozzle
- 2 diffusers
- 5 nozzles 60 A
- 15 nozzles 100A
- 5 gouging nozzles
- 3 extended nozzles 100 A
- 20 electrodes
- 3 extended electrodes
- 1 standoff guide
- 1 nozzle shield
- 1 nozzle shield for gouging
- 1 extended nozzle shield
- 2 O-rings
1 silicone lubricant for O-ring
Kit adapted to the plasma torch on the cutter
Lincoln Tomahawk 1538
Saf Prestojet 100
In stock
Lincoln Electric
Reference: W03X0893-5R
€49.09
41,25 € tax excl.
Fast delivery
2-year warranty
3 diffusers for Lincoln plasma cutter torch PC 210 - PC 208 and Tomahawk 30K
This diffuser is suitable for Lincoln torches model LC 25 and LC30
In stock
Lincoln Electric
Reference: W100000361
€193.38
162,50 € tax excl.
or 3 x 64,46 €
Free delivery
2-year warranty
Kit adapted to the plasma torch on the Lincoln Tomahawk 30 K plasma cutter with integrated compressor
It contains:
10 electrodes
3 gas diffusers
10 Nozzles 30 A
1 Gas nozzle
1 Pad
In stock
Gys
Reference: 037649
(3 reviews)
€25.74
21,63 € tax excl.
Fast delivery
2-year warranty
1 cutting deflector pad 20/70A for automatic torch AT-70
In stock
Lincoln Electric
Reference: W100000329
€48.49
40,75 € tax excl.
Fast delivery
2-year warranty
5 nozzles 45 A for Lincoln plasma cutter torch, original supply with the Tomawak 45
In stock
Telwin
Reference: 804156
(2 reviews)
€197.34
165,83 € tax excl.
or 3 x 65,78 €
Free delivery
2-year warranty
Replacement PK type torch for Telwin Technology 54 XT plasma cutter
EURO connector
Max current: 35 A @35%
Maximum cutting thickness 10 mm
Equipped with an air cooling system (operating pressure 5 bar and flow rate between 97 and 110 L/minute)
Length 4 m
Supplier stock
Telwin
Reference: 804976
€146.76
123,33 € tax excl.
Free delivery
2-year warranty
This CNC interface kit is installed between your plasma cutter and a numerically controlled cutting table
This kit is compatible with TELWIN brand plasma cutters whose model names are listed below:
Superior Plasma 70-100-160.
Cable length 10 m
In stock
Gys
Reference: 040199
(4 reviews)
€34.51
29,00 € tax excl.
Fast delivery
2-year warranty
Cutting carriage for plasma torch S25K / S35K / S45
In stock
Gys
Reference: 037977
(1 review)
€78.34
65,83 € tax excl.
Fast delivery
2-year warranty
Replacement trolley for the MT70/125A compass kit
Supplier stock
Gys
Reference: 064720
€324.28
272,50 € tax excl.
or 4 x 81,07 €
Free delivery
2-year warranty
This complete kit IS suitable for the Gys Cutter 125 CT plasma torch
In stock
Trafimet
Reference: PD0116
(9 reviews)
€19.04
16,00 € tax excl.
Fast delivery
2-year warranty
10 nozzles for plasma cutter torch available in 3 diameters: 0.6 - 0.8 and 0.9 mm.
Suitable for torches found on the brands
Deca
The IPAC 1235 and IPAC 1235 K models accept nozzles of Ø 0.6 and 0.8 mm.
The D-PAC 60 plasma cutter accepts nozzles of Ø 0.8 and 0.9 mm
These nozzles fit on Trafimet S 25 - S25K - S35 K - S45 and S45 P plasma torches
Before purchasing, check the usable nozzle Ø in your Trafimet torch manual.
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m