Italy
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Empire
Reference: EMFINEB
(7 reviews)
€2.88
2,42 € tax excl.
Fast delivery
2-year warranty
Ultra-resistant tip: writes on concrete, wood and metal, wet and oily surfaces. Non-toxic ink
Professional Welding Equipment & Welding Tools | Best prices at EURO-WELDING
Refine your search
By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View my favorites
View as
Empire
Reference: E250M
(4 reviews)
€24.69
20,75 € tax excl.
Fast delivery
2-year warranty
TRUE BLUE square, level vial with E-band contrast strip for better visibility, steel blade, laser engraving
Length: 300 mm
In stock
FISCHER-DAREX
Reference: PAD.150
€27.37
23,00 € tax excl.
Fast delivery
2-year warranty
Polished steel caliper readable to 1/100th - Digital display of measurement
Delivered in a case with a 150 mm steel ruler
In stock
FISCHER-DAREX
Reference: PX6
(1 review)
€4.46
3,75 € tax excl.
Fast delivery
2-year warranty
In stock
FISCHER-DAREX
Reference: CPJ5
(1 review)
€7.64
6,42 € tax excl.
Fast delivery
2-year warranty
Knurled body Ø 0.8 mm
Diameter 2-3-4-5-6 mm
FISCHER-DAREX
Reference: PXJ4
(3 reviews)
€7.89
6,63 € tax excl.
Fast delivery
2-year warranty
Pack of 4 center punches Ø 2.5-4-6-8 mm
Knurled body with zinc-plated finish
In stock
FISCHER-DAREX
Reference: 9540
(2 reviews)
€3.92
3,29 € tax excl.
Fast delivery
2-year warranty
Cutting of PVC tube, aluminum tube, steel tube, treated steel tube.
In stock
FISCHER-DAREX
Reference: 4176
(1 review)
€9.87
8,29 € tax excl.
Fast delivery
2-year warranty
Spring compass with polished steel tips
Length 150 mm
Screw adjustment
In stock
FISCHER-DAREX
Reference: 1205
(7 reviews)
€7.83
6,58 € tax excl.
Fast delivery
2-year warranty
This kit contains:
1 stainless steel ruler, length 200 mm
1 scriber, length 210 mm
1 center punch 2.5 mm
In stock
FISCHER-DAREX
Reference: FD1003
(1 review)
€4.17
3,50 € tax excl.
Fast delivery
2-year warranty
Thickness gauge from 0.05 to 1 mm.
In stock
FISCHER-DAREX
Reference: PAL.150
(2 reviews)
€16.31
13,71 € tax excl.
Fast delivery
2-year warranty
Polished steel caliper with 1/100th reading
Supplied in a case with a 150 mm ruler
Urko tools
Reference: 68
€16.36
13,75 € tax excl.
Fast delivery
2-year warranty
3 aviation snip models available
length 25 cm
Universal cut
Right cut
Left cut
Chrome molybdenum steel.
Serrated blade, induction hardened at high frequency
Cutting capacity:
1.2 mm for steel
0.7 mm for stainless steel
Only the universal model is available for sale
| Combinations | Price | |
| €16.36 | ||
| €16.36 | ||
| €16.36 | ||
In stock
StrongHandTools
Reference: T64216
(1 review)
€8.43
7,08 € tax excl.
Fast delivery
2-year warranty
This stop allows workpieces to be held in place
Compatible with any welding table with Ø 16 mm holes
Tube size: 65 mm maximum
In stock
StrongHandTools
Reference: T64203
(1 review)
€5.36
4,50 € tax excl.
Fast delivery
2-year warranty
This stop allows workpieces to be held in place for welding. Compatible with any welding table with Ø 16 mm holes
Dimensions:
Diameter 25 mm
Useful stop height: 37 mm
Total height: 52 mm
In stock
SILICONI
Reference: RIVELEX 200
(1 review)
€10.41
8,75 € tax excl.
Fast delivery
2-year warranty
RIVELEX 200 is an aerosol product for detecting cracks or porosity caused by welding in all types of materials. Thanks to its composition, RIVELEX 200 can be applied very quickly, as it contains fast-evaporating solvents that leave a white powder on treated surfaces, enabling crack detection.
It can be used with red and fluorescent penetrants (PENTRIX 100).
400 ml aerosol
INSTRUCTIONS FOR USE
Shake the aerosol for at least one minute before use.
Spray RIVELEX 200 at a distance of approximately 20 to 30 cm onto the part that has been previously treated with a liquid penetrant.
Wait 10 to 20 minutes for the product to be fully effective.
Then inspect the treated materials.
This product causes no damage to treated materials.
The bases used comply with the regulations, ASME 2644 type II; MIL-I-25135 form D type II..
CHARACTERISTICS
Base: Mixture of solvents and white powders
Propellant: Denatured hydrocarbon, odorless
Appearance: White liquid
CFC-FREE
In stock
SILICONI
Reference: PENTRIX 100
(1 review)
€13.39
11,25 € tax excl.
Fast delivery
2-year warranty
PENTRIX 100 is a red penetrant liquid in aerosol form, formulated to reveal cracks, crazes or porosity caused by welding on ferrous materials and other metals.
Thanks to its intense colour and composition, PENTRIX can penetrate the most complex areas and reveal cracks and crazes caused by welding.
400 ml aerosol
INSTRUCTIONS FOR USE
Shake well before use.
1. Degrease and clean the surface to be treated with METACLEAN aerosol degreaser;
2. Spray PENTRIX 100 on the parts to be inspected;
3. Wait 10 to 70 minutes for the product to fully penetrate.
4. Clean the treated surfaces with water or solvent. Do not spray solvent aerosol directly onto treated surfaces as this could remove all of the red liquid.
CHARACTERISTICS
Base: Mixture of petroleum distillates, dyes and surface tension protectors.
Appearance: Red liquid
Propellant: Denatured hydrocarbon, non-toxic and odourless
CFC-FREE
In stock
StrongHandTools
Reference: TBXS2538
(2 reviews)
€8.88
7,46 € tax excl.
Fast delivery
2-year warranty
This stop allows you to hold workpieces in place for welding. Compatible with any welding table with a Ø 16 mm hole
Dimensions:
Diameter 25 mm
Useful stop height: 37 mm
Total height: 52 mm
In stock
RHODIUS
Reference: 303151
€18.49
15,54 € tax excl.
Fast delivery
2-year warranty
Non-woven disc for extremely high cleaning performance and maximum material removal
In stock
Weldline
Reference: SRAYMIG SVB W000011092
(5 reviews)
€6.75
5,67 € tax excl.
Fast delivery
2-year warranty
Silicone-free anti-spatter spray for protection of contact tips and gas nozzles.
Volume 400 ml
For use on cold parts, compatible with paint.
In stock
StrongHandTools
Reference: PGA20M
(1 review)
€42.59
35,79 € tax excl.
Fast delivery
2-year warranty
Long-reach multi-purpose clamp PGA20M
This clamp is used to hold and clamp workpieces together during welding, drilling, cutting, glue drying, etc.
Thread: M10 / opening: 100 mm / OAL: 585-740 mm
Adjustable throat depth: 350, 405, 460, or 510 mm
Adjustable upper spindle: non-marking rubber pads, swivel head
Adjustable lower spindle: non-marking rubber pads, fixed head
Weight: 2.2 kg
In stock
StrongHandTools
Reference: MLD600
(15 reviews)
€19.34
16,25 € tax excl.
Fast delivery
2-year warranty
For holding parts from the outside when access from the inside is difficult
Possible angle: 90° -30°/60°
Dimensions: H 165 x W 110 x Thickness 20 mm
Magnetic force: 18 kg
Weight: 800 g
In stock
StrongHandTools
Reference: UBN110
(5 reviews)
€19.34
16,25 € tax excl.
Fast delivery
2-year warranty
Accessory designed for tables 4mm thick
Supplier stock
AEG Powertools
Reference: 4935447375
€201.11
169,00 € tax excl.
or 3 x 67,04 €
Free delivery
2-year warranty
. Powerful 2-speed hammer drill 1100 Watts, 60 Nm torque
. Very low vibration level thanks to the integral AVS system
. Metal housing for optimum durability and improved motor ventilation
. 13mm self-tightening chuck
. Soft Grip technology for improved ergonomics
. Large drilling capacities: 22mm in concrete, 24mm in masonry, 13mm in metal, 40mm in wood
. Fast drilling in all materials
. Large 2-finger trigger with variable speed for perfect control and perfect ergonomics, even with gloves
. Impact rate of 57,000 rpm
Supplier stock
AEG Powertools
Reference: 4935472278
(1 review)
€209.86
176,42 € tax excl.
or 3 x 69,95 €
Free delivery
2-year warranty
. Powerful and compact Subcompact motor with brushless* technology delivering up to 200Nm of torque
. 3 speeds providing perfect control for all applications
. Very compact design offering great ergonomics and productivity
. Very lightweight tool at 1.3kg with a PRO18V 2.0 Ah battery / compatible with the PRO18V system
. Only 119mm in length allowing access to the tightest spaces
. 1/4 HEX chuck
Batteries and charger available as options below
In stock
FISCHER-DAREX
Reference: 804303
(7 reviews)
€4.76
4,00 € tax excl.
Fast delivery
2-year warranty
Chrome vanadium locking pliers 250 mm bi-material handle
Opening system up to 53 mm and 35 mm depth.
Serrated jaws for secure holding
Ergonomic locking system, clamping force adjustment via knob
In stock
FISCHER-DAREX
Reference: 804300
(7 reviews)
€9.62
8,08 € tax excl.
Fast delivery
2-year warranty
Locking pliers length 230 mm.
Serrated jaws for a firm grip
4-position rack for adjusting clamping up to 60 mm and 30 mm depth.
Adjustable clamping force via knob.
In stock
FISCHER-DAREX
Reference: 804310
(36 reviews)
€7.34
6,17 € tax excl.
Fast delivery
2-year warranty
This large-capacity locking plier clamp allows you to grip bulky workpieces and profiles with large ribs.
It is characterized by the particular shape of its jaws, which allows you to clamp profiles, U-channels and other angle irons with high pressure.
Opening system up to 102 mm and 80 mm depth.
Bi-material handle.
Clamping force adjustment via knob
Ergonomic clamping and release system
In stock
FISCHER-DAREX
Reference: réglet
(5 reviews)
€2.88
2,42 € tax excl.
Fast delivery
2-year warranty
2 available ruler lengths: 150 and 300 mm.
| Combinations | Price | |
| €2.88 | ||
| €3.57 | ||
In stock
Weldline
Reference: CERASKIN
(4 reviews)
€31.74
26,67 € tax excl.
Fast delivery
2-year warranty
Ceramic-based anti-spatter spray with very fast drying that protects welding equipment and wear parts against welding spatter.
Extremely fast drying (a few seconds)
Long-lasting hold and resistance of the protective film
Ceraskin guarantees 8 hours of continuous welding work without needing to reapply the product
In stock
Weldline
Reference: NETMIG
(20 reviews)
€11.40
9,58 € tax excl.
Fast delivery
2-year warranty
NETMIG is a paste that prevents welding spatter from adhering to nozzles or contact tips.
Does not clog orifices or threads
Does not cause porosity
Solvent-free, silicone-free and odourless.
Compatible with all MIG-MAG torches except fume extraction torches.
Volume 300g
In stock
StrongHandTools
Reference: TBH90604
(5 reviews)
€391.71
329,17 € tax excl.
or 4 x 97,93 €
Free delivery
2-year warranty
Worktop dimensions: 900 x 600 mm.
2 possible working heights:
To be placed on your workbench or worktop: leg height 158 mm
Assembly with provided removable legs: working height 860 mm
Worktop thickness: 4 mm
Hole diameter: 16 mm
Weight: 33 kg
Maximum permitted weight: 680 kg
Sold bare
Two kits available (offered as options):
TBKM1-28: Square accessories for welding table
TBKM2-24: Round accessories for welding table
AEG Powertools
Reference: 4935451310
(11 reviews)
€167.59
140,83 € tax excl.
or 3 x 55,86 €
Free delivery
2-year warranty
1300 W angle grinder with speed selector, suitable for metalwork
Disc diameter: 125 mm.
Metal gearbox for greater durability
Aluminium cast iron guard adjustable at 90°
Motor delivering 11,500 RPM in operation
Anti-vibration handle in 3 positions and tool-free guard adjustment
LLO system preventing the machine from restarting after a power cut
Simple and quick disc change; Fixtec system
Power cable: 4 m
Supplied in a case with AVS handle, flange and 3 flap discs + 1 sanding pad + 10 abrasive discs
In stock
RHODIUS
Reference: 208373
(5 reviews)
€3.87
3,25 € tax excl.
Fast delivery
2-year warranty
Cutting disc thickness 1.9 mm
Bore 22.23
Diameter 125 mm
Particularly effective on stainless steel, also suitable for work on mild steel
This disc allows cutting and grinding in a single pass with a thickness of only 1.9 mm
3 fibreglass layers guarantee a reinforced structure and extremely high lateral stability
Easy adjustment of the attack angle allows safe deburring, deflashing, chamfering or sanding operations directly after cutting, without having to change disc or machine
In stock
RHODIUS
Reference: 210829
(6 reviews)
€3.52
2,96 € tax excl.
Fast delivery
2-year warranty
Extra thin cut-off disc for optimal precision. This disc has a thickness of 0.6 mm
Producing very little burr, it allows cutting of steel and stainless steel
Very useful for thin sheet materials such as automotive bodywork, thin-walled tubes and profiles, corrugated sheets...
Bore 22.23 diameter 125 mm
In stock
FISCHER-DAREX
Reference: F802
(24 reviews)
€3.92
3,29 € tax excl.
Fast delivery
2-year warranty
Fixed pen-type scriber, all-steel
Pen-type scriber for marking steel.
Length 150 mm. Ø 6 mm.
Supplier stock
StrongHandTools
Reference: TD6-1212Q-K3
€3,409.35
2 865,00 € tax excl.
or 4 x 852,34 €
Free delivery
2-year warranty
Plateau dimension 1200 x 1200 mm
The table plate nitrided and black oxidized, reversible and resistant to welding spatter, to rust and scratches
Plate thickness: 16 mm - Hole spacing 50 x 50 mm
Hole diameter: 16 mm
Maximum permitted load: 750 kg
In stock
SILICONI
Reference: MOLISIL
(2 reviews)
€8.88
7,46 € tax excl.
Fast delivery
2-year warranty
MOLISIL is used as an anti-spatter product to protect the torch "nozzle" against droplet adhesion.
It is a very effective anti-spatter because it contains MOS2 and graphite in slightly higher quantities than a standard anti-spatter product
(oil-based).
MOLISIL can also be used as a lubricant to lubricate moving mechanical parts, prevent friction and reduce wear. It is used for high-temperature lubrication.
500 ml aerosol can
INSTRUCTIONS FOR USE
Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve clogging.
SPECIFICATIONS
Base: Molybdenum disulphide and graphite
Propellant: Odourless denatured hydrocarbon.
Temperature resistance: 700°C
Appearance: Dry grey film
CFC-FREE CHLORINE-FREE
In stock
SILICONI
Reference: ZINCOSIL 430
€6.70
5,63 € tax excl.
Fast delivery
2-year warranty
ZINCONSIL 430 is used for cold galvanising on all metals. An aerosol with a high zinc content used particularly for touch-ups on welds, to restore or galvanise metal parts, to galvanise and protect bolts exposed to weathering for long periods, to restore grilles, gates, metal parts, containers and metal structures.
ZINCOSIL 430 is also an effective protector against corrosion from atmospheric agents, salt and moisture.
400 ml aerosol
PROPERTIES:
- Contains no chlorinated solvents,
- High zinc content,
- Fast drying,
- Does not drip,
- High coverage power,
- High corrosion resistance,
- Good resistance to atmospheric agents, washing agents, oxidising agents.
- Colour identical to galvanising,
- Durable protection
- The aerosol is fitted with an anti-drip diffuser; its use does not cause stains.
INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from becoming blocked.
SPECIFICATIONS
Base: Pure zinc 98% on synthetic backing
Pigment purity:>98%
Propellant: Denatured and odourless hydrocarbon
Appearance: Light grey colour
Dry film thickness: 20 to 40 µm (cross-coat)
Coverage capacity: high
Coverage rate: approx. 120 ml/m²
Temperature resistance: -50°C to +250°C (Metal powder resists up to 700°C)
Drying time: 5 to 10 minutes. Fast drying, does not drip.
Electrical conductivity: high
Abrasion resistance: Very high
Cross-cut: DIN 53151 - ISO 2409 = GTO/GT1
Oxidation resistance: Very good corrosion resistance
SILICONI
Reference: ZINCO 98
(2 reviews)
€7.89
6,63 € tax excl.
Fast delivery
2-year warranty
ZINCO 98 is an aerosol with a high zinc content, particularly suitable for welding touch-ups, for restoring or galvanising parts, and for galvanising and protecting nuts and bolts exposed to the weather over a long period.
This product creates a solid, resistant zinc film that protects steel materials from oxidation and can be painted over or left as is. It withstands salt spray for several hours.
The can is fitted with an anti-drip feature to prevent mess during use.
400 ml aerosol
INSTRUCTIONS FOR USE
Concentrated product
Shake the aerosol vigorously for at least 1 minute before use until the ball inside the aerosol is moving.
Never use without shaking the aerosol, otherwise the heavy concentrated zinc powder at the bottom settles inside the nozzle and blocks the valve, rendering the aerosol unusable
SPECIFICATIONS
Base: Pure zinc at 98%
Pigment purity:>98%
Appearance: Dark grey colour
Propellant: Odourless denatured hydrocarbon. Does not contain CFC
Dry film thickness: 30-60 microns
Coverage power: High
Coverage value: approx. 150ml/m2
Drying time: 5-10 minutes (fast drying, does not drip)
Electrical conductivity: High
Abrasion resistance: Very high
Oxidation resistance: Very good corrosion resistance
Temperature resistance: From -50°C to +500°C
In stock
SILICONI
Reference: METALCLEAN 300
(1 review)
€5.90
4,96 € tax excl.
Fast delivery
2-year warranty
METACLEAN is a degreaser and aerosol cleaner for metals.
It removes all types of dirt present on metal: oil traces, grease, incrustations, tar, carbon and adhesive residues. It is also effective on steel and aluminum.
400 ml aerosol can
INSTRUCTIONS FOR USE
(Concentrated product – shake well before use)
Spray onto surfaces to be treated, then clean with a cloth or with compressed air.
CHARACTERISTICS
Base: Mixture of solvents and degreasers with low surface tension
Appearance: Clear liquid
Propellant: Denatured hydrocarbon, non-toxic, odorless, colorless.
DOES NOT CONTAIN CFC
In stock
SILICONI
Reference: DISTAC WELD
(5 reviews)
€6.15
5,17 € tax excl.
Fast delivery
2-year warranty
DISTAC WELD is a silicone-free anti-spatter aerosol for metal.
It is used as an anti-spatter product for parts to be welded and also as protection for welding torch nozzles.
Thanks to its silicone-free composition, it allows subsequent treatments such as varnishing, galvanising, chrome plating, etc.
It makes welding easier and faster and helps prevent the formation of cracks and crevices.
500 ml aerosol
DIRECTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Spray the product around the parts to be welded at a distance of 25 cm.
SPECIFICATIONS
Base: Mixture of synthetic silicone-free anti-spatter agents
Propellant: Denatured and odourless hydrocarbon, flammable
Appearance: Clear oil
Temperature resistance: Up to 250°
Biodegradability: More than 85%
Film thickness: 2 to 3 microns
CONTAINS NO CFC OR DICHLOROMETHANE
In stock
SILICONI
Reference: CERAMSTAK
(2 reviews)
€16.36
13,75 € tax excl.
Fast delivery
2-year warranty
CERAM STAK is used to protect the torch from welding spatter.
Suitable for MIG/TIG torches, laser and plasma cutting, automatic welding machines.
Lubricant for high-temperature surfaces.
500 ml aerosol can
DESCRIPTION
CERAM STAK is an excellent anti-spatter product for protecting the torch tip from droplet adhesion. It lasts several hours (up to 8 hours) and has a superior anti-adhesive effect compared to standard silicone-free anti-spatter products, because it withstands high temperatures.
CERAM STAK is also an excellent lubricant. It deposits a thin dry film that improves action, prevents friction and reduces deformation. It can be used to lubricate work tables, furnaces, foundry slides, and whenever a high-temperature lubricant is needed.
INSTRUCTIONS FOR USE
Apply to the surface to be treated, which must first be thoroughly cleaned and degreased.
Shake the aerosol for at least one minute. During application, shake the aerosol regularly to keep the product homogeneous.
Spray the product from a distance of 15 cm to deposit a thin film.
After use, shake the aerosol for a few seconds to unblock the valve.
Shelf life is 2 years from the date of manufacture.
SPECIFICATIONS
Base: Microfine ceramic
Propellant: Denatured odourless hydrocarbon
Appearance: White dry film
Temperature resistance: 1500°C – at 200° the resins blend and become a nano-ceramic powder.
Drying time: 5 minutes
Contains no CFCs or silicone.
In stock
SILICONI
Reference: ANTITEK
(2 reviews)
€6.45
5,42 € tax excl.
Fast delivery
2-year warranty
ANTITEK® is a new generation water-based anti-spatter aerosol, harmless to users. Thanks to its composition, silicone-free and with selected raw materials, ANTITEK® allows subsequent and successive surface treatments (painting, galvanizing or chrome treatment)
ANTITEK® is used to prevent the adhesion of impurities or spatter on welded elements or on the wear parts of welding torches.
500 ml aerosol
INSTRUCTIONS FOR USE
Spray around the end of the torch or on the metal to be welded or cut.
Do not spray on welding strips.
Shake before use.
Apply a first burst into the air when the aerosol is new.
Spray at a distance of 25-30 cm from the parts to create a film that will prevent spatter. Do not spray too long, or closer than 25 cm from the part.
Do not spray an excessive amount of product.
Degrease the welded part with detergent products before proceeding with surface treatments.
Use-by date: 10 months from the production date indicated on the aerosol.
CHARACTERISTICS
Base: Synthetic oil mixed with water base. SILICONE-FREE.
Propellant: Mixed, denatured, non-toxic, ecological gas.
Appearance: Clear liquid
Viscosity at 25°C: 20-50 cst
Odor: None
Anti-spatter performance: Very good
In stock
SILICONI
Reference: ALUSIL
(1 review)
€7.89
6,63 € tax excl.
Fast delivery
2-year warranty
ALUSIL is a spray product containing a high level of aluminum. It is suitable for welding touch-ups and for protecting aluminum parts from oxidation.
It forms a film that restores and protects aluminum surfaces.
It can be painted over or left without a final protective coating.
400 ml aerosol
INSTRUCTIONS FOR USE
Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve blockage.
CHARACTERISTICS
Base: Pure aluminum paint
Propellant: Odorless denatured hydrocarbon
Coverage power: High
Dry film thickness: 15/20 microns
Drying: Fast
Temperature resistance: High
Color: Metallic
Specific gravity: 0.9 kg/lt
Dry residue: Approximately 30'
In stock
SILICONI
Reference: ZINCOSIL 400
€8.68
7,29 € tax excl.
Fast delivery
2-year warranty
ZINCONSIL 400 is to be used for cold galvanizing on all metallic materials with a high zinc content.
This aerosol product with a high zinc content is particularly suitable for touch-ups after welding, for restoration or galvanizing of metal sheets, for galvanizing and protecting metal parts outdoors, and for restoring the zinc surfaces of grilles, gates, sheets, tanks and metal structures.
The aerosol is fitted with a drip-free diffuser; its use does not cause stains.
ZINCONSIL 400 also provides good protection against corrosion caused by atmospheric agents such as salinity and humidity.
500 ml aerosol
PROPERTIES
High zinc content
Fast drying, drip-free
High covering power
Durable protection
High resistance to corrosion, atmospheric agents and oxidation
Paintable
Colour identical to galvanizing
INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from clogging.
Dry film thickness: 20 to 40 µm (cross-coat coverage)
Covering power: high
Coverage capacity: approx. 120 ml/m²
Drying time: 5 to 10 minutes. Fast drying, drip-free
Save 10%
In stock
StrongHandTools
Reference: TDQ612075-K1
(6 reviews)
€2,216.37
€2,462.63
1 862,50 € tax excl.
or 4 x 554,09 €
Free delivery
2-year warranty
Table top dimensions 1200 x 750 mm. Height 910mm
The table top nitrided and black oxidized, reversible and resistant to welding spatter, to rust and scratches
Top thickness: 16 mm - Hole spacing 50 x 50 mm
Hole diameter: 16 mm
Maximum permitted weight: 680 kg
Lockable casters + leveling feet for mobile or stationary use
Delivered with accessories.
Optional: Plasma cutting top
The plasma cutting top supports 45 kg, over a450 x 710 mm cutting surface with 14 reversible slats.
The generous width of 45 mm between the cutting blades provides sufficient space for clamping the blank holder.
The blades remain in place when the top is folded.
Cut, clamp and fasten at a single convenient mobile workstation at an ideal and uniform working height.
Supplier stock
AEG Powertools
Reference: Batterie 18V AEG-2
€167.59
140,83 € tax excl.
or 3 x 55,86 €
Free delivery
2-year warranty
Batteries compatible with all tools in the PRO18V range
Two amperages available:
PROLITHIUM-ION 6 AH Battery (AEG reference: L1860SHD)
Thermal protection
Overload protection
Weight: 0.8 kg
PROLITHIUM-ION 9 AH Battery (AEG reference: L1890RHD)
Thermal protection
Overload protection
Overheat protection
Individual cell protection
Up to 2 times more battery life than an AEG 5.0AH battery
Compatible with all AEG PRO 18V tools since 2007
Weight: 1.2 kg
| Combinations | Price | |
| €193.38 | ||
| €167.59 | ||
In stock
Soudure pro
Reference: ORIGINAL FIX
(11 reviews)
€28.76
24,17 € tax excl.
Fast delivery
2-year warranty
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Helps unscrew the contact tip or gas nozzle from the torch.
Suitable for gas nozzles Ø 12 to 15 mm.
Supplier stock
AEG Powertools
Reference: 4935478945
(1 review)
€256.84
215,83 € tax excl.
or 3 x 85,61 €
Free delivery
2-year warranty
This AEG 18V Lithium battery pack includes:
2 Batteries 18 V - 5Ah lithium reference L1850R
1 Charger BL1218 for 12 or 18 V AEG battery
1 coated canvas storage bag
AEG Powertools
Reference: 4935464419
(1 review)
€291.97
245,42 € tax excl.
or 3 x 97,32 €
Free delivery
2-year warranty
- Brushless* 18V motor
- DMS "Dead man" switch
- Soft start
- Electric brake and anti-kickback protection
- Fixtec system for quick disc change
- 3-position anti-vibration handle
- Tool-free guard adjustment
Batteries and charger available as optional extras below
AEG Powertools
Reference: 4935472280
€178.45
149,96 € tax excl.
or 3 x 59,48 €
Free delivery
2-year warranty
. Powerful and compact Brushless* Subcompact motor delivering up to 20,000 rpm
. Ergonomic design for a good one-handed grip
. Light and compact cutting tool weighing only 1.2Kg with a 2.0 Ah battery L1820S
. 76mm diameter disc allowing a cutting depth of 16mm
. Disc forward/reverse selector and easy adjustment of the guard
. LED light provides bright illumination of the work surface
. Capable of cutting metal, brick, plastic and plaster
. Compatible with all products in the PRO18V range
Supplied with 4 metal cutting discs Ø 76x 1 mm + 1 carbide disc Ø 76x1 mm
Batteries and charger available as optional extras below
Supplier stock
AEG Powertools
Reference: 4935472279
€177.51
149,17 € tax excl.
or 3 x 59,17 €
Free delivery
2-year warranty
. Powerful and compact Subcompact brushless motor delivering up to 280Nm of torque
. 3 speeds and 1 autostop mode providing perfect control for all applications
. Very compact design offering great ergonomics and productivity for the user
. Very lightweight tool at only 1.4kg with a PRO18V 2.0 Ah battery
. Compatible with the PRO18V system
. Only 113mm in length allowing access to the most confined spaces
. The AUTOSTOP mode stops the tool after full tightening to avoid damaging nuts
. 1/2 square drive
Batteries and charger available as optional extras below
Save 10%
In stock
AEG Powertools
Reference: 4935451082
(2 reviews)
€193.76
€215.29
162,88 € tax excl.
or 3 x 64,59 €
Free delivery
2-year warranty
. BRUSHLESS* 18V motor
. Compact and powerful for all applications on your job site
. Most compact hammer drill on the market ( 151 mm long without chuck and 193 mm with )
. 75 Nm with 4.0Ah battery / 60 Nm with 2.0Ah battery
. 2 speeds 0-550 / 0-2100 rpm
. Supplied with a side handle and a 13mm self-tightening chuck for maximum versatility
. Handle and micro-texture coating for a firm and comfortable grip
. 1/4 HEX socket once the chuck is removed. The 25mm bit can be left in place even when the chuck is fitted
. Torque (tightening) and speed performance remain the same even when the tool is fitted with its offset chuck or angle head chuck
. Integrated LED lighting on the front of the tool to illuminate dark work areas
. 3-mode selector: drilling, screwdriving, hammer drilling
. AEG PRO Lithium-Ion technology with overload and overheat protection for longer tool and battery life
Batteries and charger available as optional extras below
In stock
Telwin
Reference: 802586
(8 reviews)
€88.26
74,17 € tax excl.
Fast delivery
2-year warranty
Save 30%
In stock
Telwin
Reference: 802627
€147.76
€211.08
124,17 € tax excl.
Free delivery
2-year warranty
In stock
Telwin
Reference: 981863
(2 reviews)
€88.75
74,58 € tax excl.
Fast delivery
2-year warranty
Cleaning brush kit for Cleantech 200 Telwin
This item is used when cleaning with the BRUSH IT cleaner
These brushes are suitable for cleaning small weld beads
In stock
Telwin
Reference: 804031
€28.76
24,17 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for wide or long weld beads
1 L container.
Applied with a suitable pad. Reference 981866
In stock
Telwin
Reference: 981866
€39.57
33,25 € tax excl.
Fast delivery
2-year warranty
Cleaning pad kit for Cleantech 200 Telwin
This item is used when cleaning with the CLEAN IT cleaner
These pads are suitable for cleaning large weld beads
In stock
Gys
Reference: 041332
(40 reviews)
€36.59
30,75 € tax excl.
Fast delivery
2-year warranty
Special pliers for MIG/MAG torch
Uses:
- To clean the inside of the nozzle
- Cut excess wire at the torch outlet before the welding operation
- Assists in unscrewing the contact tip or gas nozzle from the torch.
- Suitable for gas nozzles sz Ø 12 to 15 mm.
In stock
SOUDO METAL
Reference: MIMTSM
(68 reviews)
€9.87
8,29 € tax excl.
Fast delivery
2-year warranty
Magnetic holder for MIG torch
In stock
SOUDO METAL
Reference: MITTSM
(47 reviews)
€9.87
8,29 € tax excl.
Fast delivery
2-year warranty
Magnetic holder for TIG torch
In stock
Weldas
Reference: 44-7110
(1 review)
€7.14
6,00 € tax excl.
Fast delivery
2-year warranty
Split leather electrode holder
Capacity 2.3 kg
In stock
AEG Powertools
Reference: 4935412985
€183.46
154,17 € tax excl.
or 3 x 61,15 €
Free delivery
2-year warranty
. 500W motor
. Slide trigger easily operated with the thumb
. Auto-stop carbon brushes
. Alloy housing and double ball bearings
. Only 1.3kg and ergonomic design for single-handed use
. Variable speed with pre-selection from 10,000 to 29,000 rpm
. Supplied with a wrench, 6mm collets and a 4m cable
Batteries and charger available as an option below
In stock
AEG Powertools
Reference: 4935451306
(6 reviews)
€124.38
104,59 € tax excl.
Free delivery
2-year warranty
1200 W grinder suitable for metalwork
Disc diameter 125 mm
Metal gearbox for greater durability
Aluminium cast iron guard adjustable to 90° without tools
Motor delivering 9000 RPM in operation
Cutting depth 40 mm
AVS anti-vibration handle with 3 positions
LLO system preventing the machine from restarting after a power cut
Power cable: 4 m
M14 spindle
Weight 2.4 kg
In stock
Lincoln Electric
Reference: W000010167
€146.76
123,33 € tax excl.
Free delivery
2-year warranty
The Lincoln Freezcool special welding coolant is a ready-to-use heat transfer fluid. It contains an algaecide that limits fouling caused by algae growth in the cooling system.
Its thermal stability and dielectric properties make it a coolant particularly suited to high-technology circuits.
Fields of application:
Cooling of welding torches
Cooling of induction furnaces
Cooling of spot welding circuits, plasma torches
Non-volatile (no product loss), antifreeze protection down to -27°C - does not polarize, non-toxic and non-flammable, anti-corrosion and anti-algae.
Supplied in a 9.6 L container
In stock
SOUDO METAL
Reference: MIEHSM
(27 reviews)
€9.87
8,29 € tax excl.
Fast delivery
2-year warranty
Magnetic holder for electrode holder
In stock
AEG Powertools
Reference: 4935451307
(2 reviews)
€137.84
115,83 € tax excl.
Free delivery
2-year warranty
1200 W angle grinder suitable for metalwork
Disc diameter: 125 mm
Metal gearbox for greater durability
Cast aluminium guard adjustable 90° without tools
Motor delivering 9,000 rpm under load
AVS anti-vibration handle with 3 positions
LLO system preventing the machine from restarting after a power cut
Weight: 2.4 kg
Spindle: M14
Power cable: 4 m
Supplied in a case with AVS handle, flange and 2 discs
Save 10%
In stock
Gys
Reference: 060258
(10 reviews)
€28.76
€31.95
24,17 € tax excl.
Fast delivery
2-year warranty
Capacity 7 kg
For electrodes up to 45 cm
Maximum electrode temperature 105°C
Dimensions: 500 x 120 x 110 mm - 430g
In stock
Telwin
Reference: 802582-804109
(51 reviews)
€17.80
14,96 € tax excl.
Fast delivery
2-year warranty
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle
In stock
A.T.I
Reference: 16501
€3.96
3,33 € tax excl.
Fast delivery
2-year warranty
Wooden-handled welding brush with 3 rows of steel wire for brushing the weld bead.
Total brush length including handle 290 mm
Handle length 135 mm
Wire length 25 mm
In stock
SOUDO METAL
Reference: F11805S
(21 reviews)
€7.43
6,24 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 295 grams
Steel handle with a total length of 27 cm.
In stock
Weldline
Reference: W000335164
(10 reviews)
€6.84
5,75 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 330 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm) providing a very good grip on the hammer.
In stock
A.T.I
Reference: 16504
(17 reviews)
€9.88
8,30 € tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle comprising 30 mm wavy stainless steel wires for brushing the weld bead to remove slag.
This brush allows non-aggressive cleaning of steel, stainless steel, or non-ferrous metals.
Total brush length including handle: 245 mm
Usable length: 135 mm
Klingspor
Reference: 358370
(6 reviews)
€9.42
7,92 € tax excl.
Fast delivery
2-year warranty
Welding brush with wooden handle comprising 4 rows of straight stainless steel wires for brushing welds to produce a clean bead by removing slag.
Total brush length including handle 290 mm
Usable length 125 mm
In stock
A.T.I
Reference: 16500
(32 reviews)
€3.92
3,29 € tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Total brush length including handle 245 mm
Useful length 135 mm
In stock
Sacit
Reference: CAV000081
(5 reviews)
€4.82
4,05 € tax excl.
Fast delivery
2-year warranty
Reversible hammer-brush, combining a hammer and a brush for chipping and brushing slag from the weld bead.
Practical 2-in-1 tool for post-weld cleaning.
Carefully sized handle to keep the user away from the hot zone.
Dimensions:
Total length (brush + handle): 290 mm (brush + handle length)
Handle length: 145 mm
Wire length: 25 mm
Save 10%
In stock
Trafimet
Reference: lot 010341
(32 reviews)
€11.07
€12.30
9,31 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile, basic...) or gasless welding wire.
Weight 273 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Wire brush with wooden handle for brushing the weld to achieve a clean bead.
Total brush length including handle 29 cm
Handle length 13.5 cm
Save 20%
In stock
Sacit
Reference: F11808S
(35 reviews)
€6.64
€8.29
5,58 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 273 Grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
In stock
SOUDO METAL
Reference: MI-MPH5
(2 reviews)
€34.71
29,17 € tax excl.
Fast delivery
2-year warranty
Large magnetic positioner
Possible angles: 45 - 90 and 135 °
Dimensions: A 116 mm / B: 125 mm
Capacity: 9.2 kg
Lateral pull load capacity: 36 kg
Direct lifting capacity: 9.2 kg
In stock
StrongHandTools
Reference: MFT10
(9 reviews)
€17.35
14,58 € tax excl.
Fast delivery
2-year warranty
The best way to position and tack pieces together
Suitable for different shapes, round, flat or angled metal surfaces.
Features 6 magnets
Supplier stock
StrongHandTools
Reference: MVDF 44
(14 reviews)
€34.71
29,17 € tax excl.
Fast delivery
2-year warranty
Articulated positioner for holding sheet metal, round, flat or square workpieces during welding operations
Each positioner has 4 magnets
Pack of 4 positioners
In stock
FISCHER-DAREX
Reference: 792912
€14.78
12,42 € tax excl.
Fast delivery
2-year warranty
Riveting pliers, body in hardened cast iron.
Pliers supplied with a wrench for changing the rivet fixing heads.
Rubber grip handle for better handling.
4 fixing heads supplied, for rivets of Ø 2.4 - 3.2 - 4 and 4.8 mm.
In stock
StrongHandTools
Reference: MAV120
(1 review)
€243.90
204,96 € tax excl.
or 3 x 81,30 €
Free delivery
2-year warranty
Adjustable magnetic square from 30 to 275° Fast and efficient for holding round or flat pieces together. Handle to adjust and lock the desired angle
In stock
StrongHandTools
Reference: MST327
(23 reviews)
€28.21
23,71 € tax excl.
Fast delivery
2-year warranty
Holds 2 pieces at angles
Practical: positioned on the outside, they leave clear space for tack welding from the inside
Various positioning angles available: 60-90-120°
Dimensions 83 x 95 x 16mm
In stock
Oxyturbo
Reference: 260090
(22 reviews)
€19.73
16,58 € tax excl.
Fast delivery
2-year warranty
This flow meter allows you to measure the actual gas flow rate at the nozzle of your welding machine.
It is a tool that helps you save gas while achieving the correct settings.
In stock
SOUDO METAL
Reference: MI-MPH25
(82 reviews)
€11.90
10,00 € tax excl.
Fast delivery
2-year warranty
Small magnetic positioner.
Possible angles: 45 - 90 and 135°.
Dimensions: A: 57 mm and B: 62 mm.
Capacity: 2 kg.
In stock
SOUDO METAL
Reference: MI-MPH35
(92 reviews)
€15.86
13,33 € tax excl.
Fast delivery
2-year warranty
Large magnetic positioner.
Available angles: 45 - 90 and 135°
Dimensions A: 92 mm and B: 93 mm
Capacity: 9.2 kg
In stock
FISCHER-DAREX
Reference: 792942
€48.59
40,83 € tax excl.
Fast delivery
2-year warranty
Pliers for riveting and nut insertion.
Supplied with an assortment of 40 rivets Ø 2.4 - 3.2 - 4 and 4.8 mm
Allows insertion of nuts type M3 - M4 - M5 - M6
FISCHER-DAREX
Reference: Ecrous
€3.77
3,17 € tax excl.
Fast delivery
2-year warranty
Pack of 40 rivet nuts.
Used as a threaded insert to fix metal to metal: stool tubes, chairs, table legs, balustrades...
For use with the Fischer-Darex pliers reference 792942.
3 thread sizes available
| Combinations | Price | |
| €3.77 | ||
| €4.17 | ||
| €4.76 | ||
In stock
FISCHER-DAREX
Reference: RIVETS-INOX
(1 review)
€7.74
6,50 € tax excl.
Fast delivery
2-year warranty
Stainless steel rivets for fastening metal to metal or stainless steel for assembly or repair.
Delivered with 1 metal drill bit
4 rivet sizes are available:
Ø 3.2 x 10 mm (pack of 75 pieces)
Ø 4 x 10 mm (pack of 48 pieces)
Ø 4.8 x 10 mm (pack of 25 pieces)
Ø 4.8 x 14 mm (pack of 25 pieces)
| Combinations | Price | |
| €7.74 | ||
| €6.84 | ||
| €4.91 | ||
| €5.36 | ||
In stock
FISCHER-DAREX
Reference: RIVETS-ACIER
(1 review)
€3.62
3,04 € tax excl.
Fast delivery
2-year warranty
Steel/steel rivets with high shear resistance for fastening metal to metal
Delivered with a drill bit
Examples: lock fitting, heavy gates...
2 rivet sizes are available:
Ø 4 x 10 mm (pack of 75 pieces)
Ø 4.8 x 16 mm (pack of 48 pieces)
| Combinations | Price | |
| €3.62 | ||
| €4.17 | ||
In stock
FISCHER-DAREX
Reference: Limes
(2 reviews)
€4.91
4,13 € tax excl.
Fast delivery
2-year warranty
3 files depending on the work to be done:
Flat file 1/2 smooth ( length 200 mm)
For flattening all metal parts
Half-round bastard file ( length 200 mm)
For flattening and rounding all metal parts
Round file Ø 7 mm ( length 200 mm) not available
For forming holes in metal
Extra strong bi-material handle, shock resistant
| Combinations | Price | |
| €4.91 | ||
| €5.36 | ||
| €3.18 | ||
In stock
FISCHER-DAREX
Reference: D159
€19.64
16,50 € tax excl.
Fast delivery
2-year warranty
Tri-material handle
Aluminum frame
2-position cutting adjustment: 90° / 45°
Quick blade change via knob in the handle
Supplied with one bi-metal blade *** and a blade holder handle
In stock
FISCHER-DAREX
Reference: CGJ5
(1 review)
€6.59
5,54 € tax excl.
Fast delivery
2-year warranty
Knurled body pin punch Ø 0.8 mm.
Diameter 2-3-4-5 and 6 mm
In stock
FISCHER-DAREX
Reference: DB9
(2 reviews)
€19.79
16,63 € tax excl.
Fast delivery
2-year warranty
Side opening.
Hardened steel, zinc-plated finish, sharpened tools
Diameter 2-3-4-5-6-7-8-9-10 mm.
In stock
StrongHandTools
Reference: PTK
(1 review)
€18.35
15,42 € tax excl.
Fast delivery
2-year warranty
Clamping clamp for table top with Ø 16 mm fixing hole
4 clamp sizes: Measurement in millimeters for columns A-B-C
| Reference | A | B | C | Weight (Kg) |
| PT07K | 50 | 60 | 150 | 0,300 |
| PT09K | 75 | 100 | 200 | 0,400 |
| PT11K | 85 | 100 | 265 | 0,700 |
| PT14K | 155 | 120 | 265 | 0,900 |
accessories designed for tables 4 mm thick.
| Combinations | Price | |
| €18.35 | ||
| €23.25 | ||
| €34.61 | ||
| €40.66 | ||
In stock
Empire
Reference: 5132002901
(3 reviews)
€29.70
24,96 € tax excl.
Fast delivery
2-year warranty
TRUE BLUE sliding bevel, anti-corrosion aluminium. Very precise marking. High contrast for better measurement readability. Very sturdy aluminium handle Length 254 mm
Supplier stock
RHODIUS
Reference: XT70
(43 reviews)
€14.38
12,08 € tax excl.
Fast delivery
2-year warranty
Cut-off disc producing minimal burr, used at high cutting speed and generating few sparks.
Enables cutting of steel and stainless steel
Available in a metal box of 10 pieces in 2 thicknesses 1 and 1.5 mm - Bore 22.23
These thin discs are particularly useful for cutting solid or thin materials
Their advantages:
Thermal stress reduced to a minimum
Reduced friction on the workpiece
Reduced blue discolouration
Almost burr-free cut
| Combinations | Price | |
| €14.38 | ||
| €14.63 | ||
In stock
RHODIUS
Reference: XT77
(14 reviews)
€1.54
1,29 € tax excl.
Fast delivery
2-year warranty
Cut-off disc producing minimal burr, used at high cutting speeds and generating few sparks
Enables cutting of steel
Suitable for cutting rebar, sheet metal and hardened steel
Available in 2 thicknesses: 1 and 1.5 mm - Bore 22.23
These thin discs are particularly useful for cutting solid or thin materials (less than 3 mm)
Their advantages:
Minimal thermal stress
Reduced friction on the workpiece
Reduced blue discolouration
Cut almost burr-free
| Combinations | Price | |
| €1.54 | ||
| €1.34 | ||
In stock
RHODIUS
Reference: XT24
(8 reviews)
€3.05
2,56 € tax excl.
Fast delivery
2-year warranty
Low-burr cutting disc, used at high cutting speeds and generating very few sparks
For cutting aluminium and non-ferrous metals
Suitable for cutting bronze and brass
Available in 2 thicknesses: 1 and 1.5 mm - Bore 22.23
These thin discs are particularly useful for cutting solid or thin materials (less than 3 mm)
Their advantages:
Thermal stress reduced to a minimum
Reduced friction on the workpiece
Reduced blue discolouration
Almost burr-free cut
| Combinations | Price | |
| €3.05 | ||
| €3.25 | ||
In stock
RHODIUS
Reference: FS1
(5 reviews)
€4.81
4,04 € tax excl.
Fast delivery
2-year warranty
Deburring grinding wheel thickness 4 mm
Bore 22.23
Diameter 125 mm
Suitable for stainless steel, steel and also cast iron
Its high level of fineness is ideal for weld seams. The machined part can be directly galvanized or painted
Available in grits 40 - 60 and 80. No additional fine deburring is required
Used for treating weld seams, grinding angles and edges, surface finishing, leveling, deburring
| Combinations | Price | |
| €4.81 | ||
| €4.81 | ||
| €4.81 | ||
In stock
RHODIUS
Reference: LSZ F2
(33 reviews)
€3.70
3,11 € tax excl.
Fast delivery
2-year warranty
Zirconia flap discs with fibreglass backing. Diameter 125 mm - Bore 22.23
High performance on stainless steel but also suitable for work on steel
Available in 3 grits: 40 - 60 and 80
Long service life and high material removal rate
| Combinations | Price | |
| €3.70 | ||
| €3.37 | ||
| €3.70 | ||
In stock
RHODIUS
Reference: Vision PRO
(17 reviews)
€6.52
5,48 € tax excl.
Fast delivery
2-year warranty
Open-flap zirconia disc with fibreglass backing. Diameter 125 mm - Bore 22.23
Particularly suited for work on steel.
Available in 3 grits: 40 - 60 and 80.
Good service life and high material evacuation capacity.
Controlled material removal.
Thanks to its 3 notches, the Rhodius Vision Speed flap disc becomes transparent when spinning, ensuring a clear view of the workpiece.
Constant monitoring of your work is therefore possible.
Disc suitable for bodywork applications for example.
| Combinations | Price | |
| €5.93 | ||
| €6.52 | ||
| €6.52 | ||
In stock
RHODIUS
Reference: KSM-RS28
(18 reviews)
€4.03
3,39 € tax excl.
Fast delivery
2-year warranty
Grinding wheel thickness 7 mm. Bore 22.23 diameter 125 mm
Two wheels are available depending on the material: stainless steel or steel
The stainless steel grinding wheel can also be used on steel if needed
| Combinations | Price | |
| €4.03 | ||
| €4.31 | ||
In stock
RHODIUS
Reference: LGA ALU
(5 reviews)
€4.20
3,53 € tax excl.
Fast delivery
2-year warranty
Long-lasting flap disc. Diameter 125 mm - Bore 22.23
Ideal for working aluminium and other non-ferrous metals
Available in 2 grits: 40 - 60
Adjustable ABS backing pad
Good service life and high material removal capacity
| Combinations | Price | |
| €4.20 | ||
| €4.20 | ||
In stock
Urko tools
Reference: 21-A
(4 reviews)
€4.62
3,88 € tax excl.
Fast delivery
2-year warranty
C-clamp for sheet metal.
3 possible clamping sizes.
| Combinations | Price | |
| €4.62 | ||
| €6.15 | ||
| €9.22 | ||
Urko tools
Reference: 21-P/1
(2 reviews)
€1.94
1,63 € tax excl.
Fast delivery
2-year warranty
Metal clamp
Clamping capacity 2.5 cm
In stock
StrongHandTools
Reference: TBKM
(4 reviews)
€256.84
215,83 € tax excl.
or 3 x 85,61 €
Free delivery
2-year warranty
Kit contents:
TBKM1-28 (accessories for square profile)
4 magnetic supports
4 positioning stops
4 insertion stops
4 stop bars
4 threaded adapters
TBKM2-24 (accessories for round profile)
4 clamps
8 V-tube supports
4 V-Spacers
4 stop bars
4 threaded adapters
Accessories designed for 4 mm thick tables
| Combinations | Price | |
| €256.84 | ||
| €244.94 | ||
Supplier stock
StrongHandTools
Reference: TBHKM100
(4 reviews)
€594.01
499,17 € tax excl.
or 4 x 148,50 €
Free delivery
2-year warranty
Table top dimensions 900 x 600 mm
2 possible working heights:
To be placed on your workbench or work surface: leg height 158 mm
Mounting the included removable legs: working height 860 mm
Table top thickness: 4 mm
Hole diameter: 16 mm
Weight: 33 kg
Maximum permitted weight: 680 kg
Delivered with the TBKM1-28 kit, square accessories for welding table including:
4 clamps
4 Magnetic supports
4 positioning stops
4 insertion stops
4 stop bars
4 threaded adapters
Option available: TBKM2-24 kit: Round accessories for welding table (optional)
In stock
StrongHandTools
Reference: MGH4510
(1 review)
€15.47
13,00 € tax excl.
Fast delivery
2-year warranty
Magnetic grinder support for Ø 112 and 125 mm grinders.
It also features a designated space for storing the disc removal wrench as well as grinding or cutting discs.
In stock
RHODIUS
Reference: LGZ F2
(8 reviews)
€3.70
3,11 € tax excl.
Fast delivery
2-year warranty
Flat zirconia flap discs with fibreglass backing. Diameter 125 mm - Bore 22.23
High performance on stainless steel but also suitable for work on mild steel
Available in 3 grits: 40 - 60 and 80
Long service life and excellent material removal
| Combinations | Price | |
| €3.70 | ||
| €3.70 | ||
| €3.70 | ||
In stock
StrongHandTools
Reference: UDN
(4 reviews)
€19.64
16,50 € tax excl.
Fast delivery
2-year warranty
Clamping clamp for table top with Ø 16 mm fixing hole
2 clamp sizes:
UDN6150: 150 x 83 mm
UEN6200: 200 x 100 mm
| Combinations | Price | |
| €19.64 | ||
| €29.25 | ||
Supplier stock
StrongHandTools
Reference: TPL7653
(1 review)
€229.82
193,13 € tax excl.
or 3 x 76,61 €
Free delivery
2-year warranty
The plasma cutting table supports 45 kg over a cutting surface of 450 x 710 mm with 14 reversible / replaceable steel slats
The width between the slats is 45 mm, providing ample space for clamping in the low position
The blades stay firmly in place when the table is folded. Cut, clamp and fix on a convenient mobile workstation at the ideal and uniform working height
In stock
StrongHandTools
Reference: T65056
€19.68
16,54 € tax excl.
Fast delivery
2-year warranty
Clamping bolt for welding table with 16 mm diameter hole
Adjustment range: 22 mm ~ 27 mm
In stock
StrongHandTools
Reference: PR
(2 reviews)
€35.65
29,96 € tax excl.
Fast delivery
2-year warranty
Wide-opening locking pliers with articulated tips, suitable for bodywork, assembly, welding and sheet metal work.
| Reference | Length | Opening | Capacity | Weight |
| PR115S | 280 | 100 | 83 | 1 kg |
| PR18S | 450 | 114 | 114 | 1.4 kg |
Measurements expressed in millimetres
| Combinations | Price | |
| €20.73 | ||
| €35.65 | ||
In stock
SILICONI
Reference: SUPER CLEANER
€9.42
7,92 € tax excl.
Fast delivery
2-year warranty
SUPER CLEANER is a fast and powerful cleaner for removing: oils, greases, stains, dirt, and sludge. It is suitable for cleaning engines, gears, chains, hard surfaces, chrome parts, plastics, steel, bicycles, aluminium painted parts, chains, and gearboxes. It does not damage rubber, plastic, or carbon frames. Free from petroleum solvents. It contains additives that leave a shiny, protective film on treated surfaces. It does not corrode or scratch treated materials. BIODEGRADABLE.
Thanks to its formula, it can penetrate and dissolve all types of dirt or encrustation.
750 ml spray bottle
It cleans without leaving greasy residues.
Suitable for cleaning: industrial machines, workbenches, engines, chrome frames, chains, chrome parts, external engine parts, nozzles, mechanical movements, plates, iron parts, copper, engine parts, car rims.
SUPER CLEANER reduces the adhesion of dirt on treated surfaces.
✓ Non-flammable
✓ Non-toxic
✓ Ammonia-free
✓ Non-abrasive
INSTRUCTIONS FOR USE
Wet the parts to be cleaned with water, then apply SUPER CLEANER onto them.
Wait a few minutes for the product to act and dissolve the dirt.
Then remove the dirt with a cloth.
Repeat the operation if the dirt is difficult to remove.
It can also be diluted with water to clean delicate surfaces or fabrics.
CHARACTERISTICS
Base: Mixture of detergents and degreasers
Appearance: Transparent amber liquid
Odour: Fragranced
pH: Alkaline
Viscosity: Fluid
Biodegradability: Over 80%
In stock
A.T.I
Reference: 16508
€12.89
10,83 € tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Long handle to keep a safe distance from the heat of the welded part
Total brush length including handle: 370 mm
Effective length: 135 mm
In stock
StrongHandTools
Reference: MSA
(12 reviews)
€81.31
68,33 € tax excl.
Fast delivery
2-year warranty
Quick and easy for holding parts
Ideal for holding round and square tubes as well as sheet metal plates
2 sizes are available and 3 models:
MSA46-HD: pulling force 40 kg - Dimensions 111 x 95 x 29 mm - Angles 45 and 90°
MSA48-HD: pulling force 75 kg - Dimensions 152 x 130 x 35 mm - Angles 45 and 90°
MSA53-HD: pulling force 65 kg - Dimensions 152 x 130 x 35 mm - Angles 45 - 60 and 90°
| Combinations | Price | |
| €42.64 | ||
| €81.31 | ||
| €78.34 | ||
In stock
StrongHandTools
Reference: MS2
(2 reviews)
€123.96
104,17 € tax excl.
Free delivery
2-year warranty
The quick and easy way to hold round or flat workpieces
Two on/off switches for independent operation
2 sizes are available:
MS2-80: pulling force 55 kg - Dimensions 152 x 152 x 38 mm.
MS2-90: pulling force 120 kg - Dimensions 197 x 197 x 48 mm
| Combinations | Price | |
| €123.96 | ||
| €196.35 | ||
In stock
StrongHandTools
Reference: MS
(17 reviews)
€21.81
18,33 € tax excl.
Fast delivery
2-year warranty
The quick and easy way to hold parts.
Equipped with a central hole for easier gripping
Several angle options depending on the chosen model:
MS 45: pulling force 30 kg - Dimensions 111x95x19mm - Angles 45 and 90°
MS 60: pulling force 25 kg - Dimensions 111x95x19mm - Angles 60 and 90°
MS346C: pulling force 40 kg - Dimensions 140x111x19mm - Angles 45 - 60 and 90°
| Combinations | Price | |
| €21.81 | ||
| €18.35 | ||
| €19.34 | ||
Supplier stock
Urko tools
Reference:
€41.15
34,58 € tax excl.
Fast delivery
2-year warranty
2 models of sheet metal shear available
Body panel shear and industrial sheet metal shear
The industrial sheet metal shear has a cutting capacity of: 20 mm in steel and 12 mm in stainless steel.
| Combinations | Price | |
| €41.15 | ||
| €41.15 | ||
Supplier stock
Empire
Reference:
(4 reviews)
€8.93
7,50 € tax excl.
Fast delivery
2-year warranty
Ultra-resistant tip
2 options are available:
| Combinations | Price | |
| €9.87 | ||
| €8.93 | ||
dbp
Reference: MATTRA127
€12.59
10,58 € tax excl.
Fast delivery
2-year warranty
This brush is used for applying stainless steel cleaning products.
Wooden handle, acid-resistant.
Brush width 30 mm
Handle length 30 cm
In stock
SILICONI
Reference: SBLOCCANTE
€5.90
4,96 € tax excl.
Fast delivery
2-year warranty
PK is the ultimate versatile unlocking lubricant spray that Siliconi Spa takes pride in as part of its extensive range of high-quality technical aerosols for industry.
The PK multipurpose spray is ideal for releasing, lubricating, cleaning and de-oxidising bolts, gears, work tools, delicate mechanisms, electrical components, seals and industrial machinery from dirt, rust and oxidation.
PK performs seven simultaneous actions:
- Action of unlocking nuts, screws, bolts, and components seized by rust;
- Lubricating action for moving mechanisms, electronic parts, automotive components, bicycles, work and household tools;
- Anti-rust protective action on metal surfaces, through the creation of a thin film that protects the treated surface from corrosion caused by atmospheric agents and salt for a long time;
- De-oxidising action on electrical contacts: reactivates oxidised contacts and eliminates electrical dispersion;
- Water-repellent action: removes water and moisture from every treated surface;
- Anti-freeze action: allows resistance to sub-zero temperatures;
- Cleaning and degreasing action: removes grease, oil and deposits from metal surfaces.
Among its many properties, the PK multipurpose spray is particularly suited to surfaces in marine environments, does not attack rubber or plastic, and contains no silicone.
The product is available in both the standard version and with the SMART dispenser button, which allows targeted dispensing, thanks to the practical tube mounted on the dispenser button, which increases spray precision on the least accessible parts and enhances the product's action. The great ease of application of the PK spray is characterised by the ability to dispense the product in any position in which the aerosol can is placed.
The PK multipurpose spray is a green product, as it contains renewable raw materials and the production process used to create it uses 80% renewable energy.
In stock
SILICONI
Reference: CLINOX GREEN
€9.87
8,29 € tax excl.
Fast delivery
2-year warranty
CLINOX Green is a cleaner for stainless steel and chrome surfaces.
CLINOX Green is an innovative product as it contains biodegradable detergents free of hexane and chlorinated compounds, with high detergent power. Furthermore, its formula is highly concentrated in active ingredients, with a reduced propellant content.
It removes rings, grease, oils, and dirt, and leaves a protective film that reduces future scratches and protects machines from stains, dust, marks, and corrosion.
It does not scratch or stain. It contains no substances that could damage, stain, or harm treated surfaces.
CLINOX Green cleans stainless steel surfaces on industrial equipment, kitchens, refrigerators, doors, countertops. Biodegradable. Eco-compatible
500 ml aerosol
DIRECTIONS FOR USE
Shake the dispenser before use.
Spray the product onto a dry cloth and clean the surfaces
SPECIFICATIONS
Base: Biodegradable cleaner
Propellant: Mixture of denatured, odorless and non-toxic propellants
Appearance: White liquid
pH: 6 - 8
Keep away from heat sources and out of direct sunlight.
Store in a dry place at temperatures between +5°C and +35°C.
Shelf life: 12 months
In stock
SILICONI
Reference: SUPER BALL
€4.91
4,13 € tax excl.
Fast delivery
2-year warranty
SUPER BALL is the best method for finding a gas leak on pressurized parts. Bubbles appear at the location of the leak. It can be used on all gases, even at low pressure (nitrogen, carbon dioxide, refrigeration systems).
Thanks to its formulation with specially selected components, it reveals micro-leaks on low surface tension surfaces
500 ml aerosol
INSTRUCTIONS FOR USE
Shake the aerosol well before use.
Spray the product from a distance of 10 cm;
For professional use only
CHARACTERISTICS
Base: Mixture of foaming components
Propellant: Denatured and odorless hydrocarbon
Appearance: White foamy liquid
Application temperature: -10°C to +130°C (approximately)
Biodegradability: Greater than 80%
Odor: None
CFC-FREE, non-toxic
In stock
SILICONI
Reference: PROTECT 700
(1 review)
€54.44
45,75 € tax excl.
Fast delivery
2-year warranty
PROTECT 700 is an anti-spatter liquid used to prevent the adhesion of slag or welding spatter.
This product contains no silicone and therefore allows subsequent surface treatments (painting, galvanizing, chromating).
PROTECT 700 can be used in an enclosed space as it is neither flammable nor toxic.
It can be diluted with water in a ratio of 1 to 5; for welding robots, it is recommended to dilute the product with water in a ratio of 1 to 1; for application with a pump, it is possible to use the product pure or diluted 1 to 1.
Base: Synthetic oil, silicone-free.
Appearance: Light yellow
Viscosity at 25°C: 30-100 cSt (Brookfield)
Temperature resistance: from -2°C to +200°C
Biodegradability: over 80%
Dilution: with water in all proportions
pH: 7 to 8
Non-flammable, non-toxic, odorless.
INSTRUCTIONS FOR USE
• Fill a sprayer:
• Spray at 20 cm from the part to be protected
• Deposits a thin, uniform film facilitating the rapid removal of welding spatter
• Remove with a degreaser or cleaner before galvanizing or painting the part(s) that have received SOUDURE ANTI GRATTONS
It is also possible to apply this anti-spatter product with a brush on the surface to be treated.
| Combinations | Price | |
| €141.91 | ||
| €54.44 | ||
In stock
Telwin
Reference: 802976
€74.38
62,50 € tax excl.
Fast delivery
2-year warranty
Coolant liquid for MIG-MAG or TIG torch cooling system 5L container
dbp
Reference: MATTRA0232
(2 reviews)
€10.81
9,08 € tax excl.
Fast delivery
2-year warranty
This brush is used for applying stainless steel cleaning products.
Plastic handle, acid-resistant.
Brush width 30 mm
Handle length 30 cm
In stock
Telwin
Reference: 804139
(1 review)
€26.28
22,08 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for small weld beads
1 L can.
Applied with a suitable brush. Reference 981863
In stock
Weldline
Reference: RESTORINOX-G
(2 reviews)
€23.80
20,00 € tax excl.
Fast delivery
2-year warranty
Final treatment phase to restore the stainless property of steel
Available in 2 and 10 kg pots in gel form
This is the final phase of the entire process, necessary to restore the stainless property of steel.
This removes contamination from the surface of stainless steel after various work phases and thus regenerates the oxide layer that gives stainless steel its properties.
In fact, this work phase recreates the chrome layer damaged by heat, while reducing the spontaneous oxidation time.
Through this process, the oxide layer that protects against external agents is restored.
How to use RESTORINOX?
First, degrease and pickle the area to be treated with the specific products CLEANOX and PICKLINOX. Then apply the product.
Rest times will vary from 20 to 60 minutes.
At the end of the treatment, rinse the product with water. Do not expose the product or the treated surface to sunlight or any atmospheric agent.
| Combinations | Price | |
| €23.80 | ||
| €122.87 | ||
In stock
Weldline
Reference: PICKINOX-P
(4 reviews)
€23.30
19,58 € tax excl.
Fast delivery
2-year warranty
Removes oxides after stainless steel welding.
Available in 2 kg and 10 kg jars in paste form
Pickling is the operation that removes all oxides after welding, by eliminating the surface layer depleted as a result of heat treatment.
It is the most important step in the treatment process.
It should be noted that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not only mean cleaning the weld beads but primarily consists of restoring the characteristics of stainless steel.
How to use Picklinox paste?
Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable period depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.
| Combinations | Price | |
| €23.30 | ||
| €92.23 | ||
In stock
Weldline
Reference: PICKLINOX- GEL
(4 reviews)
€24.30
20,42 € tax excl.
Fast delivery
2-year warranty
Removes oxides after stainless steel welding.
Available in 2 kg and 10 kg tubs in gel form
Pickling is the operation that removes all oxides after welding, by removing the surface depleted as a result of heat treatment.
It is the most important step in the treatment process.
It must be taken into account that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not simply mean cleaning the weld beads but primarily consists of restoring the stainless steel's characteristics.
How to use Picklinox paste?
Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable time depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.
| Combinations | Price | |
| €24.30 | ||
| €98.18 | ||
Supplier stock
Telwin
Reference: 804028
€87.26
73,33 € tax excl.
Fast delivery
2-year warranty
Marking kit for Cleantech 200 Telwin
In stock
Telwin
Reference: BRUSH IT
(4 reviews)
€26.68
22,42 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for small weld beads
1 L or 5 L container.
Applied with a suitable brush.
| Combinations | Price | |
| €26.68 | ||
| €88.26 | ||
Jelt
Reference: 5418
(4 reviews)
€14.27
11,99 € tax excl.
Fast delivery
2-year warranty
Cutting fluid, lubricant and coolant, compatible with all metals.
Adheres strongly to the tool and allows for high working speeds.
Prevents wear, corrosion and ensures better performance, reduces friction and facilitates machining operations.
Resistant to oxidation and high temperatures.
Produces virtually no fumes, approved for incidental food contact.
Jelt
Reference: 5090
(72 reviews)
€6.89
5,79 € tax excl.
Fast delivery
2-year warranty
The active ingredient of the SOUDURE ANTI-GRATTONS is effective over time and benefits from high anti-adhesion properties that prevent the adhesion of metal spatter and weld spatters on welding torch nozzles or any surfaces near the work area. Formulated without chlorinated or petroleum solvents, the SOUDURE ANTI-GRATTONS is neither toxic nor irritating.
Thanks to its specific water-based formulation, the SOUDURE ANTI-GRATTONS is non-flammable, releases no unpleasant odour and generates neither smoke nor dangerous vapours for the user during welding operations. The SOUDURE ANTI-GRATTONS is 92% biodegradable.
The SOUDURE ANTI-GRATTONS rinses off very easily with water and contains corrosion inhibitors. Silicone-free, it is compatible with post-finishing operations and can be used on surfaces that are to be painted, bonded or varnished.
The SOUDURE ANTI-GRATTONS is particularly recommended when you want to avoid any trace of grease on metal surfaces. It also facilitates the demoulding of parts made of polyurethane, polyester, epoxy, various plastics or rubber moulded by injection, compression or casting.
SOUDURE ANTI GRATTONS Silicone-free water-based anti-adhesion spray
MAIN CHARACTERISTICS
• Water-based formula without chlorinated or petroleum solvents
• Prevents the adhesion of molten metal spatter: welding spatter.
• Non-flammable
• Easy removal of welding spatter by simple brushing
• Transparent film in the form of micro-droplets
• Long-lasting protection
• Releases no vapour or smoke
• No unpleasant odour • Mould release action
• Contains a corrosion inhibitor
• Very easy removal of the SOUDURE ANTI GRATTONS film
• Silicone-free to facilitate post-finishing operations
FIELDS OF APPLICATION
• Protection of the welding station environment
• Protection of parts before welding
• Nozzle, soldering iron tip
• Welding robots
• Steel or aluminium moulds • Mould release agent for plastic injection moulding
Jelt
Reference: 5501
(3 reviews)
€7.84
6,59 € tax excl.
Fast delivery
2-year warranty
The DETECT FUITES is a water-based product containing an antifreeze additive, anti-corrosion additives and surfactants that give it very high efficiency in immediately locating gas leaks on all circuits. It can be used with all types of gas (compressed air, hydrocarbons, CO2, nitrogen… except pressurised oxygen)
The DETECT FUITES works by forming air bubbles around the gas leak. The DETECT FUITES is frost-resistant and can be used down to -20°C.
The DETECT FUITES is over 80% biodegradable.
Safe to use on pneumatic circuits, fittings, valves, taps, safety valves or cylinders.
MAIN FEATURES
• Immediately visible detection
• Instant bubble or foam formation
• Neutral towards substrates
• Non-flammable
• Over 99% biodegradable
• Leaves no residue
• Contains anti-corrosion agents
• Formulated with an antifreeze agent -20°C
• Do not use on pressurised oxygen — use DETECTO FUITES Ref.: 005511
• Aerosol usable in all positions
FIELDS OF APPLICATION
• Suitable for detecting leaks of:
• Compressed air, CO², Nitrogen
• Butane, Propane
• Gas used in air conditioning systems
• Refrigerant gas
• Leak detection on: • Pipework, • Valves, • Fittings, • Gate valves, • Safety valves, • Gas cylinders
Net capacity 400 ml - 650 ml aerosol can.
Made in France.
Jelt
Reference: Jelt56
(1 review)
€12.15
10,21 € tax excl.
Fast delivery
2-year warranty
3 products for complementary use:
PENETRANT:
Red dye used to highlight small defects that may cause leaks.
DEVELOPER:
White powder product. It is used in conjunction with the PENETRANT and highlights small defects that may cause leaks.
Its white powder draws out by capillary action the red penetrant embedded in the crack from a thickness of 30 microns.
Easy to apply, non-destructive testing.
CLEANER:
Surface cleaner to be used before and after dye penetrant testing.
Penetrates into the smallest cracks and removes excess PENETRANT.
| Combinations | Price | |
| €12.15 | ||
| €12.15 | ||
| €12.15 | ||
Lincoln Electric
Reference: W000267116
(1 review)
€6.70
5,63 € tax excl.
Fast delivery
2-year warranty
This brush is used for applying stainless steel cleaning products.
Plastic handle, acid-resistant.
Two diameters available: 6 and 8 mm
| Combinations | Price | |
| €7.94 | ||
| €6.70 | ||
| €11.40 | ||
In stock
Gys
Reference: WS3915G
(2 reviews)
€66.44
55,83 € tax excl.
Fast delivery
2-year warranty
Special welding coolant is essential for optimizing and preserving the performance of your spot welder's cooling system, and is also suitable for other welding processes. Its unique formula, anti-corrosive and low-conductivity, reduces the effects of electrolysis. The special welding coolant prevents the build-up of deposits and blockage of the cooling circuit compared to a standard coolant.
Its advantages:
1) Its low conductivity limits the risk of electrolysis in the cooling circuit and prevents deposits responsible for blockages in the cooling circuit.
2) Anti-corrosive in contact with heavy metals.
3) Frost-resistant down to -20°C, for operation even in the most demanding conditions.
4) Its ready-to-use formula can be used pure without any dilution.
Available in two packaging sizes of 5 or 10 litres
| Combinations | Price | |
| €138.64 | ||
| €66.44 | ||
Supplier stock
AEG Powertools
Reference: 4935464417
(2 reviews)
€372.30
312,92 € tax excl.
or 4 x 93,08 €
Free delivery
2-year warranty
- Brushless* 18V motor delivering a very fast speed of 11,000 rpm
- Soft start
- LED overload indicator
- Tool-free housing adjustment
- 3-position anti-vibration handle
- LLO anti-restart system
- Weight with battery: 2.6 kg
Supplied in a case with:
2 x 5 Ah batteries
1 charger for 14.4 and 18 V batteries
1 handle
Save 10%
In stock
AEG Powertools
Reference: 4935478943
€211.23
€234.70
177,51 € tax excl.
or 3 x 70,41 €
Free delivery
2-year warranty
. belt hook
. Interchangeable tool heads, rotatable 360° for easy switching between functions
. 6-position speed variator on a wider, more ergonomic trigger
. Softgrip handle
. Easy blade change without tools
. Oscillation angle 3.6°
. Compact and powerful - Lightweight 1.2 kg (1.46 with battery)
. LED lighting of the work area
. Design engineered for optimal ergonomics and better vibration absorption
. Supplied with cutting and sanding accessories
. Compatible with all tools in the PRO18V range
Batteries and charger available as optional extras below
Save 10%
In stock
AEG Powertools
Reference: 4935412266
(1 review)
€217.55
€241.72
182,82 € tax excl.
or 3 x 72,52 €
Free delivery
2-year warranty
. 1200 W motor
. Electronic speed controller to adapt speed to materials
. Torque and speed optimised for polishing work
. Auto-stop carbon brushes, easily accessible
. "Full-hand" trigger
. Spindle lock
. Ergonomic design with two-handed grip for intensive work
. Supplied with a side handle, 4m cable, sanding pad and gearbox protection kit
Welding equipment encompasses all the tools, gear, and consumables needed to weld efficiently and safely. From preparation welding tools to finishing accessories, a well-equipped workshop saves both time and quality. Discover our complete selection of welding supplies for professionals and experienced hobbyists alike.
The welder: the heart of the equipment
At the heart of any welding setup is the power source. Depending on your work, you will choose a stick MMA welder, a semi-automatic MIG-MAG welder, or a precision TIG welder. The choice of process determines everything else in the workshop. For cutting, a plasma cutter is the ideal complement to any workshop.
Consumables
No welding equipment works without consumables. Depending on the process: coated electrodes, wire spools, TIG rods and filler metal, tungsten electrodes and gas cylinders. These supplies wear out and need replenishing: it is wise to keep a stock on hand so as not to interrupt a job.
Preparation tools
Before welding, workpieces must be prepared. Welding preparation tools include wire brushes, grinders and discs, squares, clamps, and magnetic positioners. A perforated welding table makes clamping easier and ensures precise assemblies. Good preparation is the prerequisite for a sound weld.
Finishing tools
After welding, metal welding finishing tools take over: brushes and chipping hammers for slag, anti-spatter and anti-corrosion products, and for stainless steel, stainless steel treatment by pickling and passivation. These steps ensure the cleanliness and durability of the work.
Protective equipment
Safety is a full part of welding equipment. An automatic welding helmet protects the eyes and face, leather welding gloves protect the hands, and respiratory protection limits the inhalation of fumes. This equipment is not optional: it is essential to your health.
Organising your workshop
An efficient workshop requires well-organised and mobile tooling. A welder trolley allows you to move the power source and secure the gas cylinder. Suitable storage keeps consumables and accessories within reach and dry, which extends their service life.
Matching your tools to your skill level
Welding equipment is built up gradually, according to skill level and needs. A beginner will favour a versatile welder, a few consumables, and full protective gear. A professional workshop will invest in a coherent set of machines: multiple processes, a welding table, preparation and finishing tools, and a stock of consumables. A well-thought-out welding setup is always better than an accumulation of mismatched tools.
The importance of quality consumables
The quality of welding equipment is not limited to the power source: consumables play a decisive role. Poor-quality or poorly stored wire, electrodes, or rods will degrade the weld bead regardless of the machine. Keeping wire spools and electrodes dry, choosing the right diameters, and replacing wear parts (contact tips, nozzles) is an integral part of a well-run workshop. This is often where consistency of results is determined.
Safety: the first tool
In any welding equipment setup, protection must never take a back seat to the power source. The welding helmet, gloves, and respiratory protection are the first tools to acquire, even before thinking about consumables. Arc radiation, molten metal spatter, and fumes present real risks: a well-equipped workshop is first and foremost a workshop where you weld safely. This is the condition for working sustainably and with peace of mind, whatever processes are used. A complete set of protective equipment in good condition costs only a fraction of the price of welding equipment, but it is what preserves what matters most: your eyesight, your hands, and your lungs. Never consider it a secondary expense.
Our advice
To build a complete welding setup, start with the main process (MMA, MIG, or TIG), then add consumables, preparation and finishing tools, and above all protection. A coherent, well-maintained set of equipment is always better than an accumulation of mismatched tools. Browse our selection of welding equipment and supplies to kit out your workshop.
Frequently asked questions
What equipment do you need to start welding?
At a minimum: a welder suited to the chosen process (MMA, MIG, or TIG), its consumables (electrodes, wire, or rods), what you need to prepare the workpieces (brush, grinder, clamps), and full protective gear (helmet, gloves). A welding table noticeably improves precision.
What is the difference between welding equipment and welding consumables?
Equipment refers to durable items (welder, table, tools, protective gear), while consumables are used up with each weld (electrodes, wire, rods, gas, discs). Consumables need to be replenished regularly, and a stock should be kept on hand to avoid interrupting work.
What preparation tools should you have before welding?
Wire brushes, grinder and discs for cleaning and bevelling, clamps, squares and magnetic positioners for securing the workpieces, and ideally a perforated welding table. Good preparation directly determines the quality of the weld bead.
What protective equipment is essential for welding?
A welding helmet with the appropriate shade for the eyes and face, leather welding gloves, flame-resistant clothing, and respiratory protection against fumes — especially indoors or during intensive use. This equipment is not optional.
What equipment do you need to start welding?
To get started, plan for a suitable welder, an auto-darkening helmet, gloves, a jacket or apron, consumables, a wire brush, and test pieces to set up the machine.