This TPT 40 plasma torch is compatible with GYS cutting machines: CUTTER 30 FV - EASYCUT 40 - CUTTER 45CT
Length: 4 m
Ignition voltage: 500V maximum
Maximum rated current: 40 A
Duty cycle at 40°: 40 A@60%
Torch cooling: Air
Recommended pressure/flow rate: 5 bar - 100 l/min
Switch characteristics: (trigger) 0.6A / 125V DC - 0.3A / 250V DC
165,83 € tax excl.
This TPT 40 plasma torch is compatible with GYS cutting machines: CUTTER 30 FV - EASYCUT 40 - CUTTER 45CT
Length: 4 m
Ignition voltage: 500V maximum
Maximum rated current: 40 A
Duty cycle at 40°: 40 A@60%
Torch cooling: Air
Recommended pressure/flow rate: 5 bar - 100 l/min
Switch characteristics: (trigger) 0.6A / 125V DC - 0.3A / 250V DC
Description
Important
The torch must be fitted with the correct consumables, chosen according to the application and the set current. A poor choice of consumable will cause cutting defects, premature wear of consumables and potentially a malfunction of the entire unit. The torch is delivered with a pot of silicone grease to limit seal wear and seizing of metal parts. It is recommended to apply this grease regularly.
Regularly check the wear condition of the protection nozzle, the tip and the electrode, or in the event of a significant reduction in cutting speed. It is recommended to replace the tip and electrode at the same time.
Consumables are wear parts; it is important to know when to replace them. Visually: melted or damaged consumables, nozzle holes>1.5mm, worn electrodes, melted pads… Practically: loss of cutting performance, difficult arc starting on the workpiece, etc.
Regarding the nozzle: Tighten the nozzle so that all parts are firmly locked. The nozzle should not turn easily.
Use compressed air with oil and water filtration.
€58.51
€18.99
€33.02
€32.63
Very good
Meets my expectations
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
In stock
Gys
Reference: 039988
€326.26
274,17 € tax excl.
or 4 x 81,57 €
Free delivery
2-year warranty
This CNC interface kit is installed between your Plasma cutter and a numerically controlled cutting table
This kit is compatible with Gys brand plasma cutters whose model names are listed below:
Plasma 45-70-85-105-125
In stock
Gys
Reference: 037595
€44.23
37,17 € tax excl.
Fast delivery
2-year warranty
5 gouging nozzles 70 A for plasma torch MT-70
In stock
Lincoln Electric
Reference: W03X0893-58A
€44.23
37,17 € tax excl.
Fast delivery
2-year warranty
5 nozzles for Lincoln LC 105 manual plasma torch
Compatible with the Tomahawk 1538 plasma cutter
Supplier stock
Telwin
Reference: 802143
€26.68
22,42 € tax excl.
Fast delivery
2-year warranty
This magnetic cutting guide helps you make straight cuts.
It is placed on the sheet metal to be cut and stays in position during cutting thanks to its magnet.
Supplier stock
Gys
Reference: 039148
€41.65
35,00 € tax excl.
Fast delivery
2-year warranty
1 diffuser 105/125 A for plasma torch AT-125 - MT 125
In stock
Telwin
Reference: 804169
€57.51
48,33 € tax excl.
Fast delivery
2-year warranty
This compass kit is suitable for the torches on the following plasma cutters:
Technology plasma 41 XT
Technology plasma 54 XT
Technology plasma 60 XT
In stock
Gys
Reference: 040199
€34.51
29,00 € tax excl.
Fast delivery
2-year warranty
Cutting carriage for plasma torch S25K / S35K / S45
Supplier stock
Telwin
Reference: 804415
€104.13
87,50 € tax excl.
Fast delivery
2-year warranty
This kit contains:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
This kit is suitable for the Telwin plasma cutters listed below
Technology 41XT
Infinity PLASMA 40
In stock
Gys
Reference: 037588
€22.31
18,75 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles 70 A for plasma torch MT-70 / AT-70
Supplier stock
Telwin
Reference: 804108
€244.94
205,83 € tax excl.
or 3 x 81,65 €
Free delivery
2-year warranty
This kit for a manual torch includes:
1 torch tip
8 electrodes
3 nozzles 20-50A
5 nozzles 70 A
1 diffuser
This kit is compatible with TELWIN brand plasma cutters;
Reference:
SUPERIOR PLASMA 70
In stock
Gys
Reference: 037571
€24.30
20,42 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles for plasma torch MT-70 / AT-70
In stock
Gys
Reference: 037564
€34.71
29,17 € tax excl.
Fast delivery
2-year warranty
5 electrodes 20/70 A for plasma torch MT-70 / AT-70
In stock
Gys
Reference: 037601
€46.91
39,42 € tax excl.
Fast delivery
2-year warranty
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
In stock
Telwin
Reference: 804416
€118.01
99,17 € tax excl.
Fast delivery
2-year warranty
This kit includes:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
Supplier stock
Telwin
Reference: 804155
€190.90
€212.11
160,42 € tax excl.
or 3 x 63,63 €
Free delivery
2-year warranty
Replacement PH type torch for Telwin Technology 41 XT plasma cutter
EURO connector
Max current: 50 A @35%
Max cutting thickness: 18 mm
Equipped with an air cooling system (operating pressure 5 bar and flow rate between 97 and 110 L/minute)
Length: 4 m
In stock
Gys
Reference: 080782
€53.55
45,00 € tax excl.
Fast delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 tips Ø0.9 mm
- 3 electrodes
This kit is compatible with the TPT 35 torch model, notably used on the GYS Cutter 35K PFC plasma cutter
This TPT 40 plasma torch is compatible with GYS cutting machines: CUTTER 30 FV - EASYCUT 40 - CUTTER 45CT
Length: 4 m
Ignition voltage: 500V maximum
Maximum rated current: 40 A
Duty cycle at 40°: 40 A@60%
Torch cooling: Air
Recommended pressure/flow rate: 5 bar - 100 l/min
Switch characteristics: (trigger) 0.6A / 125V DC - 0.3A / 250V DC
Italy
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
