Telwin Multi-Process Welding Machine

Active filters

Filter by

Usage

Usage

Uses spools of diameter

Uses spools of diameter

Synergy

Synergy

MIG welding adjustment range (in Amperes)

MIG welding adjustment range (in Amperes)

Price

Price

  • €822.00 - €2,875.00

Selections

Selections

By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.

Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.

Active filters

favorite_border favorite
TELWIN - ELECTROMIG 230 WAVE| Semi-automatic MIG MAG welding machine
Save 10%

In stock

Telwin

Reference: 816060

TELWIN - ELECTROMIG 230 WAVE| Semi-automatic MIG MAG welding machine

€1,978.54

€2,198.37

1 662,66 € tax excl.

or 4 x 494,64 €

Free delivery

2-year warranty

Multi-process Synergic Inverter welding machine with an adjustment range of 10 to 240 A enabling the following welding processes:

1) Semi-automatic (welding wire) MIG-MAG, supports the use of steel, stainless steel, aluminium, brazing wire (special for automotive sheet metal) with the appropriate gas, and flux-cored wire for welding steel without gas.
The PULSE process guarantees high execution speed, excellent penetration and cleanliness, as well as welding in all positions.
This process is particularly recommended for welding thin aluminium and stainless steel.
Wire driven by a motor with 4 drive rolls.

The ROOT-MIG process makes it easier to weld sheet metal edge-to-edge, even with wide gaps (also in TIG welding mode).

2) Basic and rutile electrode rods from Ø 1.6 to 6 mm. (electrode holder optional)

3) Lift TIG start for welding steel, stainless steel and ferrous alloys. (TIG torch optional).
The ATC process is highly effective when welding thin materials (0.5 - 0.8 mm), as it reduces metal distortion caused by heat build-up.

The price includes in addition to the machine:

1 MIG/MAG torch 250A with a length of 3 m fitted with a 0.8 mm contact tip.
1 reversible drive roll for steel wire 0.6 / 0.8 mm (mounted on the machine).
1 earth clamp and cable

favorite_border favorite
TELWIN - DUAL 240 WAVE Synergic | MIG MAG semi-automatic welder
Save 10%

In stock

Telwin

Reference: 816076

TELWIN - DUAL 240 WAVE Synergic | MIG MAG semi-automatic welder
(3 reviews)

€1,869.44

€2,077.16

1 570,99 € tax excl.

or 4 x 467,36 €

Free delivery

2-year warranty

Multi-process machine allowing MMA - MIG - TIG welding.

Multi-process MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift inverter welding machine controlled by microprocessor.
The WAVE OS system makes welding operations: customisable according to user requirements; traceable and analysable, thanks to data recording on USB; simplified, thanks to synergic parameter adjustment and the presence of specific programs for materials to be welded.
Features:
- 55 customisable programs,
- continuous and pulsed operation,
- user-friendly interface with colour TFT screen,
- Wave OS operating system with pulsed welding programs for specific materials (AB Pulse for aluminium and galvanised sheet metal) and low heat input for thin thicknesses (ATC).
Supplied with 250 A torch length 3 m duty cycle 200 A@60%, and earth clamp + cable 3 m

favorite_border favorite
TELWIN - TECHNOMIG 223 TREO | MIG MAG Welding Machine

Telwin

Reference: 816284

TELWIN - TECHNOMIG 223 TREO | MIG MAG Welding Machine

€2,874.79

2 415,79 € tax excl.

or 4 x 718,70 €

Free delivery

2-year warranty

TECHNOMIG 223 TREO SYNERGIC 230V TELWIN WELDING MACHINE


Inverter multiprocess welding machine MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift controlled by microprocessor.
Particularly designed for bodywork applications, it allows immediate use of three different torches, two traditional MIG torches and one spool gun.

This feature enables direct intervention on different materials without needing to replace the torch and wire spool.
The traditional MIG torches are designed for welding steel, high-strength HLE steels, as well as stainless steel and braze-welding of galvanised sheets; the spool gun torch is specifically designed for aluminium even at a significant distance from the generator.

The SYNERGIC quick adjustment of welding parameters, thanks to ONE TOUCH LCD SYNERGY technology, makes the product very easy to use.
ATC technology, Made in Telwin, makes it easy to achieve excellent welds on thin thicknesses thanks to advanced arc control. It is also possible to intervene manually on arc length: this adjustment allows the shape of the weld bead to be modified according to the welder's style.

The ONE TOUCH LCD graphic display enables better reading of all welding parameters.

Characteristics:
- 17 pre-set synergic curves
- LCD screen display of welding parameters
- 2/4 stroke, spot operation selection
- Thermostatic, overvoltage, undervoltage, overcurrent, motor-generator protections (+/- 15%).

Supplied with:

1x Cable with earth clamp (3 metres) 16 mm² - 10/25 connectors
1x MIG torch MB15 STEEL (3 metres) Euro connector
1x MIG torch MB15 ALU (3 metres) - Euro connector
1x SPOOL GUN torch M6
1x Gas hose
1 Set of 2 drive rolls for steel or stainless wire Ø 0.6 / 0.8 mm (mounted on the machine).
User manual

2-YEAR WARRANTY

favorite_border favorite
TELWIN - TECHNOMIG 260 DUAL SYNERGIC | Multi-process welding machine

In stock

Telwin

Reference: 816056

TELWIN - TECHNOMIG 260 DUAL SYNERGIC | Multi-process welding machine
(1 review)

€1,268.34

1 065,83 € tax excl.

or 4 x 317,09 €

Free delivery

2-year warranty

The Technomig 260 Dual Synergic is a welding machine (MIG-MAG / FLUX / BRAZING / MMA / TIG-Lift) of 250A.
It is easy to use thanks to One Touch technology.
With its versatility, Technomig 260 Dual Synergic allows operation on different thicknesses and various welded and braze-welded materials, making it the ideal tool for many fields of application, from maintenance to heavy steelwork and bodywork.

It is possible to manually adjust the arc length to modify the shape of the weld bead according to the operator's style and preferences

One Touch
Setting up the Technomig 260 Dual Synergic is simple and immediate: just program the material thickness and start welding. The 25 synergic curves provided for different gases and materials allow quality welds on steel, stainless steel, aluminium and galvanized sheet metal without wasting time on machine adjustments.

ATC
This process allows welding of thin thicknesses with great ease, reducing material distortion
Arc stability even at low currents.
Fast and precise spot welding
facilitates edge-to-edge sheet metal welding

Delivered with:
1 MIG-MAG torch 250 A length 3 m
1 reversible roller for steel/stainless wire Ø 0.6/0.8 mm
1 gas hose length 1 m
1 earth clamp + cable length 3 m

For connecting the machine to gas, it is recommended to use fitting 804208.

favorite_border favorite
This product is Euro Welding's choice This product is Euro Welding's choice
TELWIN - ELECTROMIG 300 SYNERGIC |Multi-process welding machine
Save 5%

In stock

Telwin

Reference: 816065

TELWIN - ELECTROMIG 300 SYNERGIC |Multi-process welding machine
(1 review)

€2,685.10

€2,826.42

2 256,41 € tax excl.

or 4 x 671,28 €

Free delivery

2-year warranty

Multi-process Synergic Inverter welding machine with an adjustment range of 20 to 300 A, enabling:

1) Semi-automatic (welding wire) MIG-MAG, allows the use of steel, stainless steel, aluminium, brazing wire (special automotive body) with the appropriate gas, and flux-cored wire for welding steel without gas.
The ATC process guarantees less distortion of thin metals, fast and precise spot welding.
Wire driven by a motor with 4 rollers.
Excellent results on steel, stainless steel and brazing. Effective for welding aluminium.

2) Basic and rutile electrode rods from Ø 1.6 to 6 mm (electrode holder optional)

3) TIG Lift arc start for welding steel, stainless steel and ferrous alloys (TIG torch optional).
The ATC process is very effective when welding thin materials (0.5 - 0.8 mm), as it helps reduce metal distortion caused by heat build-up.

The price includes, in addition to the machine:

1 MIG/MAG torch 3 m long fitted with a 0.8 mm contact tip.
1 reversible roller for 0.6 / 0.8 mm steel wire (mounted on the machine).
1 earth clamp and cable

For connecting the machine to gas, it is recommended to use fitting 804208.

favorite_border favorite
This product is Euro Welding's choice This product is Euro Welding's choice
TELWIN - DUAL 210 Synergic | Semi-automatic MIG MAG welding machine - Multi-process machine

In stock

Telwin

Reference: 816231

TELWIN - DUAL 210 Synergic | Semi-automatic MIG MAG welding machine - Multi-process machine
(102 reviews)

€822.26

691,00 € tax excl.

or 4 x 205,57 €

  • MIG-MAG Up to 210A
  • 3 processes in 1
  • Synergic function

Free delivery

2-year warranty

Semi-automatic multi-process MIG-MAG welding machine

This welding machine uses spool wire. This welding process allows welding of thin material (0.6 mm).

Very practical on thin sheet metal (automotive bodywork, chassis...), it avoids the weld bead restart that occurs when changing an electrode.

With the addition of a shielding gas, this machine enables welding of aluminium, stainless steel and steels in MIG-MAG mode.

MIG welding under gas shielding requires the use of pure Argon gas for aluminium welding or an Argon + CO² mixture for steels and stainless steels.

Special case: For steel, it is possible to weld without gas when using flux-cored wire (this allows, for example, easier outdoor use). In this case the thickness of steel sheets must not be less than 1.2 mm without risk of burn-through.

This machine uses wire spools of Ø 100 and 200 mm.


It is supplied with

1 MIG torch 180 A EURO connector (cable length 3 m) + 1 earth clamp (cable length 1.9 m).
1 reversible roller for steel - stainless steel wire Ø 0.6 / 0.8 mm.
1 gas hose length 1 m + hose clamp. This hose fits onto a regulator for refillable cylinders.

Its Plus Points!

Storage compartment for the torch and earth clamp.

Optional
Electrode holder for coated rod welding.
TIG torch for welding steel and stainless steel, touch start ignition

For connecting the machine to gas, it is recommended to use the 804208 fitting.

favorite_border favorite
TELWIN -TECHNOMIG 215 DUAL SYNERGIC |Multi-process welding unit
Save 7%

In stock

Telwin

Reference: 816232

TELWIN -TECHNOMIG 215 DUAL SYNERGIC |Multi-process welding unit
(32 reviews)

€1,001.74

€1,077.14

841,83 € tax excl.

or 4 x 250,44 €

Free delivery

2-year warranty

This tri-technology unit allows you, with a single machine, to weld in MMA, semi-automatic (MIG-MAG) and TIG modes.

MMA (electrode) and TIG welding solutions are available as options.

As standard, this semi-automatic unit features 17 programmed settings. The user simply needs to select the type of metal and the wire diameter. It is also possible to weld in manual mode by directly adjusting the settings parameters.

This welding unit uses wire on a spool. This welding process allows welding of thin materials (0.6 mm).

Very practical on thin sheets (automotive bodywork, chassis...), it avoids the weld bead restart that occurs when changing an electrode.

With the addition of a shielding gas, this unit enables welding on aluminium, stainless steel and steels in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.

Using a suitable wire of the CU Si3 type, it enables welding of HSS, EHS, UHS steels (automotive bodywork)

MIG welding with gas shielding requires the use of pure Argon gas for aluminium welding or an Argon + CO² mixture for steels and stainless steels.

Special case: For steel, it is possible to weld without gas when using flux-cored wire (which allows, for example, easier outdoor use). In this case, the thickness of the steel sheets must not be less than 1 mm to avoid the risk of burn-through.

This unit uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). An adapter for Ø 100 mm spools is available as an option. 

Upon delivery, this unit includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless steel wire Ø 0.6 and 0.8 mm.
1 steel/stainless steel contact tip Ø 0.8 mm
1 gas hose for refillable cylinder

TIG welding with gas shielding requires the use of pure Argon gas for welding steels, stainless steels, ferrous alloys and copper...

As an option:

It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes from Ø 1.6 mm to 4 mm.

Reference KIT000514

It is possible to add a TIG torch 4 m in length in order to weld in TIG mode using pure Argon shielding gas.

For connecting the unit to gas, it is recommended to use the 804208 fitting.

 

 

 

favorite_border favorite
TELWIN TECHNOMIG 225 DUAL SYNERGIC | Multi-process welder
Save 20%

In stock

Telwin

Reference: 816057

TELWIN TECHNOMIG 225 DUAL SYNERGIC | Multi-process welder
(4 reviews)

€1,036.43

€1,295.53

870,97 € tax excl.

or 4 x 259,11 €

Free delivery

2-year warranty

This tri-process machine allows you to weld in MMA, semi-automatic (MIG-MAG) and TIG mode with a single unit.

MMA (electrode) and TIG welding solutions are available as options.

As standard, this semi-automatic machine has 17 programmed positions. The user simply selects the type of metal and the wire Ø. It is also possible to weld in manual mode by directly adjusting the setting parameters.

This welding machine uses spool wire for welding. This welding process allows welding of thin materials (0.6 mm).

Very practical on thin sheet metal (automotive body panels, chassis...), it avoids the weld bead restart that occurs when changing an electrode.

With the addition of a shielding gas, this machine allows welding of aluminium, stainless steel and steel in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.

Using a suitable CU Si3 type wire, it enables welding of HSS, EHS, UHS steels (automotive body panels)

MIG welding under gas shielding requires the use of pure Argon gas for welding aluminium or an Argon + CO² mixture for steel and stainless steel.

Special case: For steel, it is possible not to use gas when using flux-cored wire (this allows, for example, easier outdoor use). In this case the thickness of the steel sheets must not be less than 1 mm without risk of burn-through.

This machine uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). Optionally, an adapter for Ø 100 mm spools is available.

Upon delivery this machine includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless wire Ø 0.6 and 0.8 mm.
1 steel/stainless contact tip Ø 0.8 mm
1 gas hose for refillable cylinder length 1 m

TIG welding under gas shielding requires the use of pure Argon gas for welding steel, stainless steel, ferrous alloys and copper....

Optional:

It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes of Ø 1.6 mm to 4 mm.

Reference KIT000514

It is possible to add a TIG torch with a length of 4 m in order to weld in TIG mode using pure Argon shielding gas.

 

 

 

Back to top