SILICONI | SUPER CLEANER - Detergent for oil, grease, dirt and sludge

ZINCONSIL 430 is used for cold galvanising on all metals. An aerosol with a high zinc content used particularly for touch-ups on welds, to restore or galvanise metal parts, to galvanise and protect bolts exposed to weathering for long periods, to restore grilles, gates, metal parts, containers and metal structures.
ZINCOSIL 430 is also an effective protector against corrosion from atmospheric agents, salt and moisture.

400 ml aerosol

PROPERTIES:
- Contains no chlorinated solvents,
- High zinc content,
- Fast drying,
- Does not drip,
- High coverage power,
- High corrosion resistance,
- Good resistance to atmospheric agents, washing agents, oxidising agents.
- Colour identical to galvanising,
- Durable protection
- The aerosol is fitted with an anti-drip diffuser; its use does not cause stains.

INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from becoming blocked.

SPECIFICATIONS
Base: Pure zinc 98% on synthetic backing
Pigment purity:>98%
Propellant: Denatured and odourless hydrocarbon
Appearance: Light grey colour
Dry film thickness: 20 to 40 µm (cross-coat)
Coverage capacity: high
Coverage rate: approx. 120 ml/m²
Temperature resistance: -50°C to +250°C (Metal powder resists up to 700°C)
Drying time: 5 to 10 minutes. Fast drying, does not drip.
Electrical conductivity: high
Abrasion resistance: Very high
Cross-cut: DIN 53151 - ISO 2409 = GTO/GT1
Oxidation resistance: Very good corrosion resistance

ALUSIL is a spray product containing a high level of aluminum. It is suitable for welding touch-ups and for protecting aluminum parts from oxidation.
It forms a film that restores and protects aluminum surfaces.
It can be painted over or left without a final protective coating.

400 ml aerosol

INSTRUCTIONS FOR USE
Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve blockage.

CHARACTERISTICS
Base: Pure aluminum paint
Propellant: Odorless denatured hydrocarbon
Coverage power: High
Dry film thickness: 15/20 microns
Drying: Fast
Temperature resistance: High
Color: Metallic
Specific gravity: 0.9 kg/lt
Dry residue: Approximately 30'

ANTITEK® is a new generation water-based anti-spatter aerosol, harmless to users. Thanks to its composition, silicone-free and with selected raw materials, ANTITEK® allows subsequent and successive surface treatments (painting, galvanizing or chrome treatment)
ANTITEK® is used to prevent the adhesion of impurities or spatter on welded elements or on the wear parts of welding torches.

500 ml aerosol

INSTRUCTIONS FOR USE
Spray around the end of the torch or on the metal to be welded or cut.
Do not spray on welding strips.
Shake before use.
Apply a first burst into the air when the aerosol is new.
Spray at a distance of 25-30 cm from the parts to create a film that will prevent spatter. Do not spray too long, or closer than 25 cm from the part.
Do not spray an excessive amount of product.
Degrease the welded part with detergent products before proceeding with surface treatments.
Use-by date: 10 months from the production date indicated on the aerosol.

CHARACTERISTICS
Base: Synthetic oil mixed with water base. SILICONE-FREE.
Propellant: Mixed, denatured, non-toxic, ecological gas.
Appearance: Clear liquid
Viscosity at 25°C: 20-50 cst
Odor: None
Anti-spatter performance: Very good

The Lincoln Freezcool special welding coolant is a ready-to-use heat transfer fluid. It contains an algaecide that limits fouling caused by algae growth in the cooling system.
Its thermal stability and dielectric properties make it a coolant particularly suited to high-technology circuits.

Fields of application:
Cooling of welding torches
Cooling of induction furnaces
Cooling of spot welding circuits, plasma torches

Non-volatile (no product loss), antifreeze protection down to -27°C - does not polarize, non-toxic and non-flammable, anti-corrosion and anti-algae.

Supplied in a 9.6 L container

Ceramic-based anti-spatter spray with very fast drying that protects welding equipment and wear parts against welding spatter.

Extremely fast drying (a few seconds)
Long-lasting hold and resistance of the protective film

Ceraskin guarantees 8 hours of continuous welding work without needing to reapply the product

ZINCONSIL 400 is to be used for cold galvanizing on all metallic materials with a high zinc content.
This aerosol product with a high zinc content is particularly suitable for touch-ups after welding, for restoration or galvanizing of metal sheets, for galvanizing and protecting metal parts outdoors, and for restoring the zinc surfaces of grilles, gates, sheets, tanks and metal structures.
The aerosol is fitted with a drip-free diffuser; its use does not cause stains.
ZINCONSIL 400 also provides good protection against corrosion caused by atmospheric agents such as salinity and humidity.

500 ml aerosol

PROPERTIES
High zinc content
Fast drying, drip-free
High covering power
Durable protection
High resistance to corrosion, atmospheric agents and oxidation
Paintable
Colour identical to galvanizing

INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from clogging.

Dry film thickness: 20 to 40 µm (cross-coat coverage)
Covering power: high
Coverage capacity: approx. 120 ml/m²
Drying time: 5 to 10 minutes. Fast drying, drip-free

The DETECT FUITES is a water-based product containing an antifreeze additive, anti-corrosion additives and surfactants that give it very high efficiency in immediately locating gas leaks on all circuits. It can be used with all types of gas (compressed air, hydrocarbons, CO2, nitrogen… except pressurised oxygen)
The DETECT FUITES works by forming air bubbles around the gas leak. The DETECT FUITES is frost-resistant and can be used down to -20°C.
The DETECT FUITES is over 80% biodegradable.
Safe to use on pneumatic circuits, fittings, valves, taps, safety valves or cylinders.

MAIN FEATURES
• Immediately visible detection
• Instant bubble or foam formation
• Neutral towards substrates
• Non-flammable
• Over 99% biodegradable
• Leaves no residue
• Contains anti-corrosion agents
• Formulated with an antifreeze agent -20°C
• Do not use on pressurised oxygen — use DETECTO FUITES Ref.: 005511
• Aerosol usable in all positions
FIELDS OF APPLICATION
• Suitable for detecting leaks of:
• Compressed air, CO², Nitrogen
• Butane, Propane
• Gas used in air conditioning systems
• Refrigerant gas
• Leak detection on: • Pipework, • Valves, • Fittings, • Gate valves, • Safety valves, • Gas cylinders

Net capacity 400 ml - 650 ml aerosol can.
Made in France.

CERAM STAK is used to protect the torch from welding spatter.
Suitable for MIG/TIG torches, laser and plasma cutting, automatic welding machines.
Lubricant for high-temperature surfaces.

500 ml aerosol can

DESCRIPTION
CERAM STAK is an excellent anti-spatter product for protecting the torch tip from droplet adhesion. It lasts several hours (up to 8 hours) and has a superior anti-adhesive effect compared to standard silicone-free anti-spatter products, because it withstands high temperatures.
CERAM STAK is also an excellent lubricant. It deposits a thin dry film that improves action, prevents friction and reduces deformation. It can be used to lubricate work tables, furnaces, foundry slides, and whenever a high-temperature lubricant is needed.

INSTRUCTIONS FOR USE
Apply to the surface to be treated, which must first be thoroughly cleaned and degreased.
Shake the aerosol for at least one minute. During application, shake the aerosol regularly to keep the product homogeneous.
Spray the product from a distance of 15 cm to deposit a thin film.
After use, shake the aerosol for a few seconds to unblock the valve.
Shelf life is 2 years from the date of manufacture.

SPECIFICATIONS
Base: Microfine ceramic
Propellant: Denatured odourless hydrocarbon
Appearance: White dry film
Temperature resistance: 1500°C – at 200° the resins blend and become a nano-ceramic powder.
Drying time: 5 minutes
Contains no CFCs or silicone.

The active ingredient of the SOUDURE ANTI-GRATTONS is effective over time and benefits from high anti-adhesion properties that prevent the adhesion of metal spatter and weld spatters on welding torch nozzles or any surfaces near the work area. Formulated without chlorinated or petroleum solvents, the SOUDURE ANTI-GRATTONS is neither toxic nor irritating.

Thanks to its specific water-based formulation, the SOUDURE ANTI-GRATTONS is non-flammable, releases no unpleasant odour and generates neither smoke nor dangerous vapours for the user during welding operations. The SOUDURE ANTI-GRATTONS is 92% biodegradable.

The SOUDURE ANTI-GRATTONS rinses off very easily with water and contains corrosion inhibitors. Silicone-free, it is compatible with post-finishing operations and can be used on surfaces that are to be painted, bonded or varnished.

The SOUDURE ANTI-GRATTONS is particularly recommended when you want to avoid any trace of grease on metal surfaces. It also facilitates the demoulding of parts made of polyurethane, polyester, epoxy, various plastics or rubber moulded by injection, compression or casting.

SOUDURE ANTI GRATTONS Silicone-free water-based anti-adhesion spray

MAIN CHARACTERISTICS
• Water-based formula without chlorinated or petroleum solvents
• Prevents the adhesion of molten metal spatter: welding spatter.
• Non-flammable
• Easy removal of welding spatter by simple brushing
• Transparent film in the form of micro-droplets
• Long-lasting protection
• Releases no vapour or smoke
• No unpleasant odour • Mould release action
• Contains a corrosion inhibitor
• Very easy removal of the SOUDURE ANTI GRATTONS film
• Silicone-free to facilitate post-finishing operations

FIELDS OF APPLICATION
• Protection of the welding station environment
• Protection of parts before welding
• Nozzle, soldering iron tip
• Welding robots
• Steel or aluminium moulds • Mould release agent for plastic injection moulding

This brush is used for applying stainless steel cleaning products.
Plastic handle, acid-resistant.

Brush width 30 mm
Handle length 30 cm

Removes oxides after stainless steel welding.

Available in 2 kg and 10 kg tubs in gel form

Pickling is the operation that removes all oxides after welding, by removing the surface depleted as a result of heat treatment.
It is the most important step in the treatment process.
It must be taken into account that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not simply mean cleaning the weld beads but primarily consists of restoring the stainless steel's characteristics.

How to use Picklinox paste?

Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable time depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.

Marking kit for Cleantech 200 Telwin

DISTAC WELD is a silicone-free anti-spatter aerosol for metal.
It is used as an anti-spatter product for parts to be welded and also as protection for welding torch nozzles.
Thanks to its silicone-free composition, it allows subsequent treatments such as varnishing, galvanising, chrome plating, etc.
It makes welding easier and faster and helps prevent the formation of cracks and crevices.

500 ml aerosol

DIRECTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Spray the product around the parts to be welded at a distance of 25 cm.

SPECIFICATIONS
Base: Mixture of synthetic silicone-free anti-spatter agents
Propellant: Denatured and odourless hydrocarbon, flammable
Appearance: Clear oil
Temperature resistance: Up to 250°
Biodegradability: More than 85%
Film thickness: 2 to 3 microns
CONTAINS NO CFC OR DICHLOROMETHANE

Removes oxides after stainless steel welding.

Available in 2 kg and 10 kg jars in paste form

Pickling is the operation that removes all oxides after welding, by eliminating the surface layer depleted as a result of heat treatment.
It is the most important step in the treatment process.
It should be noted that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not only mean cleaning the weld beads but primarily consists of restoring the characteristics of stainless steel.

How to use Picklinox paste?

Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable period depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.

This brush is used for applying stainless steel cleaning products.
Wooden handle, acid-resistant.

Brush width 30 mm
Handle length 30 cm

Cutting fluid, lubricant and coolant, compatible with all metals.
Adheres strongly to the tool and allows for high working speeds.

Prevents wear, corrosion and ensures better performance, reduces friction and facilitates machining operations.
Resistant to oxidation and high temperatures.
Produces virtually no fumes, approved for incidental food contact.