• -20%
MULTIWELD 250T-C
Save 20%
  • MULTIWELD 250T-C
  • MULTIWELD 250T-C

Compact three-phase generator for workshop and job sites
Welds steel, stainless steel and aluminium
MIG duty cycle: 170A at 60% / 130A at 100%
MMA duty cycle: 150A at 60% / 120A at 100%
Amperage range: 40 to 250A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1.2mm and Alu 0.9 to 1.2mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 5 mm) with Anti-stick function
4-roll wire feeder for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool
Removable 250A 3m MAG torch with 2T/4T function
Digital interface and very intuitive adjustment
Compatible with 10kva generator
Three-phase power supply 400 V - 16 A
Dimensions: 58 x 52x 32 cm - 32kg
IP23 rating for outdoor use

Delivered with:
1 x 250 A 3m MB25 torch
1 x 4m ground clamp
1x User manual
2x rollers 0.8/1.0

Reference: 078659

GYS - MULTIWELD 250T-C welding machine with accessories

Gys
favorite_border favorite
€1,560.64
€1,248.51

1 049,17 € tax excl.

Supplier stock
A question about this product? Characteristics The technical data sheet The manual

Compact three-phase generator for workshop and job sites
Welds steel, stainless steel and aluminium
MIG duty cycle: 170A at 60% / 130A at 100%
MMA duty cycle: 150A at 60% / 120A at 100%
Amperage range: 40 to 250A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1.2mm and Alu 0.9 to 1.2mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 5 mm) with Anti-stick function
4-roll wire feeder for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool
Removable 250A 3m MAG torch with 2T/4T function
Digital interface and very intuitive adjustment
Compatible with 10kva generator
Three-phase power supply 400 V - 16 A
Dimensions: 58 x 52x 32 cm - 32kg
IP23 rating for outdoor use

Delivered with:
1 x 250 A 3m MB25 torch
1 x 4m ground clamp
1x User manual
2x rollers 0.8/1.0

-20%

Buy a welding machine and get 20% off all consumables on the site

100% secure payment in 2, 3, 4 or 10 instalments by credit card or PayPal
Secure payment methods
Expert after-sales service
Authorised Euro Welding dealer
A question about this product?

Characteristics of GYS - MULTIWELD 250T-C welding machine with accessories

Supply voltage (in Volts) 2 ph 400 V MIG-MAG duty cycle at 40°C 200A @60% - 160A @100%
Open circuit voltage (in Volts) 64 Uses spools of diameter Ø200 and 300mm
Ø200 and Ø300mm
Generator compatible Yes Warranty 2 years
Dimensions (in mm) 760 X 360 X 540 Weight in kg 32
Usage Industry
Professional		 Synergy No
Welding helmet Welding helmet
Welding Gloves Welding Gloves
Welding machine trolley Welding machine trolley
Welding tools Welding tools
Flow meter for welding gas cylinder Flow meter for welding gas cylinder

Expert advice for professionals and individuals

Benefit from the support of specialists, whatever your profile.

Secure payment

Your transactions are protected by the latest security technologies.

Express delivery in 24/48 h

Fast dispatch to France, Europe and overseas territories upon confirmation of your order.

Best price guaranteed

Enjoy the most competitive prices on the market all year round.

16 other products in the same category:

favorite_border favorite
GYS | KRONOS 250 M multi-process welding machine with accessories

Supplier stock

Gys

Reference: 074996

GYS | KRONOS 250 M multi-process welding machine with accessories

€2,528.75

2 125,00 € tax excl.

or 4 x 632,19 €

Free delivery

2-year warranty

Welds steel, stainless steel and aluminium from 0.6 to 6mm in all positions
MIG duty cycle: 150A at 60% / 130A at 100%
MMA duty cycle: 150A at 60% / 130A at 100%
TIG duty cycle: 150A at 60% / 130A at 100%
Current range: 20 to 250A - Voltage: 76V
Combines 4 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6 to 1.2 mm and aluminium Ø 0.9 to 1.2 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- TIG Lift DC current - Lift TIG ignition
- MMA (basic and rutile electrode up to 5 mm)
4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15 kg) spools
Removable EURO 250A 3m STEEL MIG torch (1.2 mm contact tip)
Digital interface with very intuitive adjustment
Compatible with 9 kVA generator and 100m extension lead
Cylinder support included
Single-phase 230 V - 16 A power supply
Dimensions: 75 x 45 x 80 cm - 45 kg
IP23S rating for outdoor use

Supplied with:
1 x 250 A 3m MB25 torch
1 x 3m earth clamp
2x 0.8-1.0 rollers

favorite_border favorite
GYS - SMARTMIG 110 | Semi-Automatic Welding Machine
Save 20%

Supplier stock

Gys

Reference: 033993

GYS - SMARTMIG 110 | Semi-Automatic Welding Machine

€266.90

€333.62

224,30 € tax excl.

or 3 x 88,97 €

Free delivery

2-year warranty

Portable welding machine with electric transformer
Ideal for home users and maintenance work
Designed for assembling, repairing sheet metal or steel sections
Setting assistance via the SMART table
Duty cycle: 85A@6% - 40°C
Current range: 40 to 110A
Welding NO GAS only for flux-cored wire Ø 0.6 to 0.9 mm
2-roller wire feeder for Ø100 mm spool (1 kg)
Fixed torch 150A 2.2m (0.9mm contact tip)
Single-phase power supply 230 V - 16 A
Dimensions: 34 x 17 x 34 cm - 23.3kg

Supplied with:
- 1 earth clamp (cable 1.6 m / 16 mm²)

favorite_border favorite
TELWIN TECHNOMIG 225 DUAL SYNERGIC | Multi-process welder
Save 20%

In stock

Telwin

Reference: 816057

TELWIN TECHNOMIG 225 DUAL SYNERGIC | Multi-process welder
(4 reviews)

€1,036.43

€1,295.53

870,97 € tax excl.

or 4 x 259,11 €

Free delivery

2-year warranty

This tri-process machine allows you to weld in MMA, semi-automatic (MIG-MAG) and TIG mode with a single unit.

MMA (electrode) and TIG welding solutions are available as options.

As standard, this semi-automatic machine has 17 programmed positions. The user simply selects the type of metal and the wire Ø. It is also possible to weld in manual mode by directly adjusting the setting parameters.

This welding machine uses spool wire for welding. This welding process allows welding of thin materials (0.6 mm).

Very practical on thin sheet metal (automotive body panels, chassis...), it avoids the weld bead restart that occurs when changing an electrode.

With the addition of a shielding gas, this machine allows welding of aluminium, stainless steel and steel in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.

Using a suitable CU Si3 type wire, it enables welding of HSS, EHS, UHS steels (automotive body panels)

MIG welding under gas shielding requires the use of pure Argon gas for welding aluminium or an Argon + CO² mixture for steel and stainless steel.

Special case: For steel, it is possible not to use gas when using flux-cored wire (this allows, for example, easier outdoor use). In this case the thickness of the steel sheets must not be less than 1 mm without risk of burn-through.

This machine uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). Optionally, an adapter for Ø 100 mm spools is available.

Upon delivery this machine includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless wire Ø 0.6 and 0.8 mm.
1 steel/stainless contact tip Ø 0.8 mm
1 gas hose for refillable cylinder length 1 m

TIG welding under gas shielding requires the use of pure Argon gas for welding steel, stainless steel, ferrous alloys and copper....

Optional:

It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes of Ø 1.6 mm to 4 mm.

Reference KIT000514

It is possible to add a TIG torch with a length of 4 m in order to weld in TIG mode using pure Argon shielding gas.

 

 

 

favorite_border favorite
ESAB | ROGUE EM 180 Multi-Process Welder

Supplier stock

ESAB

Reference: 0700301091

ESAB | ROGUE EM 180 Multi-Process Welder
(3 reviews)

€1,258.43

1 057,50 € tax excl.

or 4 x 314,61 €

Free delivery

2-year warranty

The ESAB Rogue EMP 180 is a multi-process welding machine with INVERTER technology, designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system delivers industrial-grade arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics according to the material being welded.
Weighing only 16.2 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.

Its features

Large 14-segment display – instant readout of voltage and wire feed speed for clear visibility
- Synergic welding programs: easy adjustment of welding parameters for welds on material thicknesses from 0.5 to 8.0 mm
- Power Factor Correction (PFC) – ensures a stable arc, resistant to power fluctuations even when working with extension cables up to 100 m
- Unique robust industrial design with multiple lifting points and optimised cable management
- Arc Dynamics: Allows precise adjustment of arc characteristics to achieve a hard arc for carbon steel or a soft arc for stainless steel.
- Provision for torch with integrated spool; Rogue automatically configures when the torch is connected.
- IP23S protection rating for ideal use on job sites.

The Esab Rogue EM 180 comes with:

- 1 power cable 3 metres with Schuko 16 A plug,

- 1 MIG torch MXL 201 Euro 3 m,

- 1 earth cable kit 16 mm², 3 m,

- 1 gas hose with quick connector 4.5 m,

- 1 ESAB OK AristoRod mild steel/iron welding wire spool 12.50 0.8 mm 1 kg,

- 1 drive rollers 0.6/0.8 mm V (fitted), 0.8/1.0 mm V and 0.8/0.9 mm VK x flux-cored wire,

- safety instructions.

favorite_border favorite
ESAB | Multi-process welder ROGUE EMP 210 PRO
Save 10%

In stock

ESAB

Reference: 0700301092

ESAB | Multi-process welder ROGUE EMP 210 PRO
(6 reviews)

€1,481.55

€1,646.16

1 245,00 € tax excl.

or 4 x 370,39 €

Free delivery

2-year warranty

The ESAB Rogue EMP 210 PRO is a multi-process INVERTER technology welding machine designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system offers industrial-level arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics to suit the material being welded.
Weighing only 16.7 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.
True multi-process unit with Synergic MIG, Manual MIG, MIG brazing, flux-cored, Lift TIG and MMA (including 6010) processes
The 5.0" TFT screen is intuitive and clear, allowing the welder easy adjustment and a quick learning curve.
Synergic welding programs: complete range of welding parameters, 0.5 to 10.0 mm with a single control knob
Power Factor Correction (PFC): ensures a stable arc, resistant to mains voltage fluctuations, even when working with long extension cords up to 100 m
Unique robust industrial design: multiple handles for easy handling and cable management
Arc dynamics: precise adjustment of arc characteristics for a crisp / stable arc for carbon steel or a fluid / soft arc for stainless steel
Jobs: ability to save / recall up to 10 operations
Compliant with IP23S standard for indoor / outdoor use

Applications
Automotive construction
Automotive bodywork
Agricultural equipment
Civil engineering
Mechanical contractors
Repair and maintenance
Light fabrication

Package contents:
1 Multi-process welding machine 210 A with 3 m power cable and 16 A plug
1 MIG torch MXL 201, 3 m with Euro connector, with 1 contact tip for steel or stainless steel wire Ø 0.8 mm
1 Ground clamp with 3 m cable, OKC 35-50 16 mm2.
1 Electrode holder, Handy 200 A, heavy-duty 50 mm OKC, with 3 m cable.
1 Gas hose 4.5 m with quick connector.
1 Ø 200 mm spool of ESAB OK AristoRod steel wire 0.8 mm, weight 1 kg
1 Feed roller 0.6 / 0.8 mm (fitted on the machine) + 1 roller 0.8 / 1 mm for steel or stainless steel wire.
1 roller 0.8 / 0.9 mm for flux-cored wire
1 roller 1 / 1.2 mm for aluminum wire
1 nozzle for flux-cored wire (gasless) + 1 contact tip Ø 0.8 mm and 1 contact tip Ø 0.9 mm
1 user manual and safety instructions.

favorite_border favorite
LINCOLN - BESTERMIG 200-S| Multi-process inverter welder
Save 30%

In stock

Lincoln Electric

Reference: B18264-1

LINCOLN - BESTERMIG 200-S| Multi-process inverter welder

€669.38

€956.26

562,51 € tax excl.

or 4 x 167,35 €

Free delivery

2-year warranty

This BesterMIG 200-S Multi multi-process machine allows MMA - MIG-MAG - TIG welding
Its digital display makes it easy to read the setting information
It accepts wire spools of diameter 100 and 200 mm.
Its low weight makes it an easy ally when transporting on site. It can also be powered by a generator.

No longer worry about choosing the welding current, wire speed or material thickness. The Synergic system does it for you while guaranteeing perfect welds.
The Synergic system limits the risk of weld defects and ensures excellent quality at reduced costs.
Weld with complete peace of mind: automatic parameter adjustment saves welding time and increases your productivity
Easy polarity change for welding with flux-cored wire (gasless).

It features the following functions:
Arc-Force
Hot-Start
Anti-Stick

It is supplied with:
1 MIG-MAG torch length 3 m equipped with a contact tip for steel or stainless steel wire Ø 0.8 mm.
1 Earth clamp + Cable cross-section 16 mm² length 3 m
1 Electrode holder + cable length 3 m
1 Power supply cable length 3 m
1 Reversible drive roll for steel or stainless steel wire Ø 0.8 / 1 mm fitted on the machine
1 Reversible drive roll for steel or stainless steel wire Ø 0.6 / 8 mm
1 Shielding gas hose for refillable cylinder length 2 m 

favorite_border favorite
GYS - M1 AUTO | Single-phase MIG MAG semi-automatic welding machine

In stock

Gys

Reference: 032903

GYS - M1 AUTO | Single-phase MIG MAG semi-automatic welding machine
(7 reviews)

€1,487.50

1 250,00 € tax excl.

or 4 x 371,88 €

Free delivery

2-year warranty

SEMI-AUTOMATIC WELDING MACHINE (MIG/MAG)
Ideal for maintenance and automotive body repair work.
Adjustment range from 15 to 160A
For wire diameter 0.6 to 1mm: steel, stainless steel and aluminium
Simple and fast adjustment: in synergic mode, the machine automatically sets the ideal wire speed.
Expandable, it can be fitted with a spool gun torch

3 available modes:
Standard (2T).
- Spot, plug welding function.
- Delay, stitch point function.

Delivered with:

1 150A torch length 3 m, fitted with a Ø 0.8 mm contact tip.
1 200 A earth clamp cable length 3 m
1 reversible roller for steel wire Ø 0.6/0.8 mm.

favorite_border favorite
TELWIN -TECHNOMIG 215 DUAL SYNERGIC |Multi-process welding unit
Save 7%

In stock

Telwin

Reference: 816232

TELWIN -TECHNOMIG 215 DUAL SYNERGIC |Multi-process welding unit
(32 reviews)

€1,001.74

€1,077.14

841,83 € tax excl.

or 4 x 250,44 €

Free delivery

2-year warranty

This tri-technology unit allows you, with a single machine, to weld in MMA, semi-automatic (MIG-MAG) and TIG modes.

MMA (electrode) and TIG welding solutions are available as options.

As standard, this semi-automatic unit features 17 programmed settings. The user simply needs to select the type of metal and the wire diameter. It is also possible to weld in manual mode by directly adjusting the settings parameters.

This welding unit uses wire on a spool. This welding process allows welding of thin materials (0.6 mm).

Very practical on thin sheets (automotive bodywork, chassis...), it avoids the weld bead restart that occurs when changing an electrode.

With the addition of a shielding gas, this unit enables welding on aluminium, stainless steel and steels in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.

Using a suitable wire of the CU Si3 type, it enables welding of HSS, EHS, UHS steels (automotive bodywork)

MIG welding with gas shielding requires the use of pure Argon gas for aluminium welding or an Argon + CO² mixture for steels and stainless steels.

Special case: For steel, it is possible to weld without gas when using flux-cored wire (which allows, for example, easier outdoor use). In this case, the thickness of the steel sheets must not be less than 1 mm to avoid the risk of burn-through.

This unit uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). An adapter for Ø 100 mm spools is available as an option. 

Upon delivery, this unit includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless steel wire Ø 0.6 and 0.8 mm.
1 steel/stainless steel contact tip Ø 0.8 mm
1 gas hose for refillable cylinder

TIG welding with gas shielding requires the use of pure Argon gas for welding steels, stainless steels, ferrous alloys and copper...

As an option:

It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes from Ø 1.6 mm to 4 mm.

Reference KIT000514

It is possible to add a TIG torch 4 m in length in order to weld in TIG mode using pure Argon shielding gas.

For connecting the unit to gas, it is recommended to use the 804208 fitting.

 

 

 

favorite_border favorite
ESAB - REBEL EMP215ic | Multi-process inverter welder

Supplier stock

ESAB

Reference: 0700300985

ESAB - REBEL EMP215ic | Multi-process inverter welder

€2,375.04

1 995,83 € tax excl.

or 4 x 593,76 €

Free delivery

2-year warranty

This multi-process unit allows you to weld: MIG-MAG including flux-cored wire, MMA, and DC TIG 

The sMIG ("smart MIG") function allows the system to "learn" and constantly adapt to the operator's welding technique to deliver a stable, reproducible arc 

The innovative user interface with large TFT screen offers a clear view of welding parameters and settings

Unique industrial design with five-handle protection cage and monobloc steel structure housed in a light and highly mobile unit; full three-year warranty

Supplied ready to weld with the following consumables and accessories:

• ESAB MXL 200 MIG torch, 3 m
• M6 contact tip for 0.8 mm wire (qty 2)
• M6 contact tip for 1.0 mm wire (qty 2)
• Gas hose, 4.5 m, quick connector
• Electrode holder + 3 m cable
• Earth clamp + 3 m cable
• Steel wire spool Ø0.8 mm weighing 5 kg
• Reversible drive roll for 0.6/0.8 mm steel wire (installed in the drive system)
• Reversible drive roll for 0.8/1.0 mm steel wire
• 0.6 mm – 0.8 mm wire liner (installed in the MIG torch)
• 3 m power cable, fitted with plug
• Safety manual
• USB user manual

Optional: SR17 TIG torch

favorite_border favorite
GYS - EASYMIG 160 | Inverter Multi-Process Welding Machine

Supplier stock

Gys

Reference: 032255

GYS - EASYMIG 160 | Inverter Multi-Process Welding Machine
(2 reviews)

€669.38

562,50 € tax excl.

or 4 x 167,35 €

Free delivery

2-year warranty

Welds steel, stainless steel and aluminium for occasional use
MIG duty cycle: 160A@ 20%-40°C
MMA duty cycle: 140A@ 20%-40°C
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 mm)
- MMA (electrode Ø 1.6 to 2.5 mm) with Anti-sticking function
2-roller wire feeder for Ø 100 mm (1 kg) or Ø 200 mm (5 kg) spool
Removable 150A MAG torch 2.20 m
Digital interface and very intuitive adjustment
Compatible with 8kVA generator
Single-phase power supply 230 V - 16 A
Dimensions: 40 x 20 x 33 cm - 10 kg

Supplied with:
- 1 earth clamp + 16 mm² cable length 1.6 m
- 1 MIG/MAG torch length 2.20 m fitted with a contact tip for steel wire Ø 0.8 mm
- 1 reversible roller for solid wire Ø 0.8 and gasless 0.9 mm
- 1 electrode holder + 16 mm² cable length 1.6 m
- 1 no-gas nozzle + 1 contact tip for flux-cored wire Ø 0.9 mm
- 1 gas hose for refillable cylinder length 1 m
- 1 wrench to loosen contact tips

favorite_border favorite
TELWIN - ELECTROMIG 230 WAVE| Semi-automatic MIG MAG welding machine
Save 10%

In stock

Telwin

Reference: 816060

TELWIN - ELECTROMIG 230 WAVE| Semi-automatic MIG MAG welding machine

€1,978.54

€2,198.37

1 662,66 € tax excl.

or 4 x 494,64 €

Free delivery

2-year warranty

Multi-process Synergic Inverter welding machine with an adjustment range of 10 to 240 A enabling the following welding processes:

1) Semi-automatic (welding wire) MIG-MAG, supports the use of steel, stainless steel, aluminium, brazing wire (special for automotive sheet metal) with the appropriate gas, and flux-cored wire for welding steel without gas.
The PULSE process guarantees high execution speed, excellent penetration and cleanliness, as well as welding in all positions.
This process is particularly recommended for welding thin aluminium and stainless steel.
Wire driven by a motor with 4 drive rolls.

The ROOT-MIG process makes it easier to weld sheet metal edge-to-edge, even with wide gaps (also in TIG welding mode).

2) Basic and rutile electrode rods from Ø 1.6 to 6 mm. (electrode holder optional)

3) Lift TIG start for welding steel, stainless steel and ferrous alloys. (TIG torch optional).
The ATC process is highly effective when welding thin materials (0.5 - 0.8 mm), as it reduces metal distortion caused by heat build-up.

The price includes in addition to the machine:

1 MIG/MAG torch 250A with a length of 3 m fitted with a 0.8 mm contact tip.
1 reversible drive roll for steel wire 0.6 / 0.8 mm (mounted on the machine).
1 earth clamp and cable

favorite_border favorite
GYS - EASYMIG 150 | Inverter Multi-Process Welder

Supplier stock

Gys

Reference: 032248

GYS - EASYMIG 150 | Inverter Multi-Process Welder
(7 reviews)

€520.63

437,50 € tax excl.

or 4 x 130,16 €

Free delivery

2-year warranty

Ideal for craftsmen or home users
Welds steel, stainless steel and aluminum occasionally
Duty cycle: 140A@15% - 40°C
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 mm)
- MMA (electrode Ø 1.6 to 2.5 mm) with Antisticking function
2-roller wire feed for spool Ø 100 mm (1 kg) or Ø 200 mm (5 kg)
Removable MAG torch 150A, 2.20m
Very intuitive interface and settings
Compatible with 8 kVA generator
Single-phase power supply 230 V - 16 A
Dimensions: 40 x 20 x 33 cm - 15 kg

Delivered with:
- 1 ground clamp (cable 1.6 m / 16 mm2)
- 1 electrode holder (cable 1.6 m / 16 mm2)
- 1 accessories bag (Contact tip 0.9mm, Gas nozzle, Tightening wrench, Gas hose 1m with 2 clamps)

favorite_border favorite
GYS - MULTIWELD 180M-C | Multi-process welding machine
Save 10%

In stock

Gys

Reference: 078727

GYS - MULTIWELD 180M-C | Multi-process welding machine
(3 reviews)

€778.46

€864.95

654,17 € tax excl.

or 4 x 194,62 €

Free delivery

2-year warranty

Multi-process welding machine for professionals
Welds steel, stainless steel and aluminum up to 3mm thick
MIG duty cycle: 110A@ 60%-40°C
MMA duty cycle: 100A@ 60%-40°C
Current range: 20 to 150A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.6 to 0.9 mm)
- MMA (electrode Ø 1.6 to 3.2 mm) with Anti-Sticking function
4-roll wire feeder for Ø 200 mm (5 kg) or Ø 300 mm (15 kg) spools
Removable MAG torch 150A 3m
Digital interface with very intuitive adjustment
Compatible with 8kVA generator
Single-phase power supply 230 V - 16 A
Dimensions: 53 x 28 x 45 cm - 16.5 kg

Delivered with:
1x 150A 3m torch
1x 2m 16mm² earth clamp
1x 2m 16mm² electrode holder
1 gas hose 1m + 2 hose clamps
1 contact tip wrench
1 contact tip 0.9 + nozzle for gasless wire

favorite_border favorite
KEMPPI | MinarMig 190 Auto MIG-MAG welding machine

Kemppi

Reference: 61008190

KEMPPI | MinarMig 190 Auto MIG-MAG welding machine

€1,581.71

1 329,17 € tax excl.

or 4 x 395,43 €

Free delivery

2-year warranty

Adaptive tool for the mobile welder
Excellent welding quality and precise arc ignition
High duty cycle: 190A@ 35% - 140A@60% - 100A @ 100%
Uses Ø 100 mm (1 kg) or Ø 200 mm (5 kg) spools
Generator compatible
3-metre torch
Lightweight and portable
LCD control panel
IP23 rating for outdoor use
Dimensions: 450x227x368mm - Weight 14.2kg
2-year warranty

Supplied with:

1 torch, length 3 m with ergonomic handle, fitted with a contact tip for steel or stainless steel wire Ø 0.8 mm
1 reversible roller for stainless steel or steel wire Ø 0.8/1 mm
1 ground clamp + cable section 16 mm², length 2.50 m
1 gas hose, length 5 m
 

favorite_border favorite
GYS - SMARTMIG 142 | Semi-automatic welding machine
Save 20%

Supplier stock

Gys

Reference: 033153

GYS - SMARTMIG 142 | Semi-automatic welding machine

€455.18

€568.97

382,50 € tax excl.

or 4 x 113,80 €

Free delivery

2-year warranty

Portable welding machine with electric transformer
Ideal for maintenance work
Designed for assembly, repair of sheet metal or profiles in steel and stainless steel
Duty cycle: 90A@20% - 40°C
Current range: 40 to 140A
Combines 2 processes:
- MIG/MAG for workshop welding wire Ø 0.6 – 0.8 mm
- NO GAS for outdoor welding flux-cored wire Ø 0.9 mm
2-roller wire feeder for spool Ø100 mm (1 kg) and Ø200 (5kg)
Fixed torch 150A 2.2m (0.8mm contact tip)
Single-phase power supply 230 V - 16 A
Dimensions: 24 x 42 x 38 cm - 22.6kg

Delivered with:
- 1 earth clamp (cable 1.6 m /16 mm2)

favorite_border favorite
TELWIN - TECHNOMIG 223 TREO | MIG MAG Welding Machine

Telwin

Reference: 816284

TELWIN - TECHNOMIG 223 TREO | MIG MAG Welding Machine

€2,874.79

2 415,79 € tax excl.

or 4 x 718,70 €

Free delivery

2-year warranty

TECHNOMIG 223 TREO SYNERGIC 230V TELWIN WELDING MACHINE


Inverter multiprocess welding machine MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift controlled by microprocessor.
Particularly designed for bodywork applications, it allows immediate use of three different torches, two traditional MIG torches and one spool gun.

This feature enables direct intervention on different materials without needing to replace the torch and wire spool.
The traditional MIG torches are designed for welding steel, high-strength HLE steels, as well as stainless steel and braze-welding of galvanised sheets; the spool gun torch is specifically designed for aluminium even at a significant distance from the generator.

The SYNERGIC quick adjustment of welding parameters, thanks to ONE TOUCH LCD SYNERGY technology, makes the product very easy to use.
ATC technology, Made in Telwin, makes it easy to achieve excellent welds on thin thicknesses thanks to advanced arc control. It is also possible to intervene manually on arc length: this adjustment allows the shape of the weld bead to be modified according to the welder's style.

The ONE TOUCH LCD graphic display enables better reading of all welding parameters.

Characteristics:
- 17 pre-set synergic curves
- LCD screen display of welding parameters
- 2/4 stroke, spot operation selection
- Thermostatic, overvoltage, undervoltage, overcurrent, motor-generator protections (+/- 15%).

Supplied with:

1x Cable with earth clamp (3 metres) 16 mm² - 10/25 connectors
1x MIG torch MB15 STEEL (3 metres) Euro connector
1x MIG torch MB15 ALU (3 metres) - Euro connector
1x SPOOL GUN torch M6
1x Gas hose
1 Set of 2 drive rolls for steel or stainless wire Ø 0.6 / 0.8 mm (mounted on the machine).
User manual

2-YEAR WARRANTY