Italy
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
- -40%
Sanding belt 100x1000 mm grit 60
Reference: DEST3239936
Sanding belt 100x1000 mm grit 60
€3.96
€2.38
2,00 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
Sanding belt 100x1000 mm grit 60
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Save 20%
In stock
TOTAL
Reference: 41726
€68.43
€85.54
57,50 € tax excl.
Fast delivery
2-year warranty
20 V cordless impact wrench. Brushless motor. 1/2'' insert. Maximum tightening torque 400 Nm. Loosening torque 550 Nm. 20 V No-load speed 0–1600 / 0–1900 / 0–2300 rpm. Impacts 0–2100 / 0–2500 / 0–2900 bpm. LED light. With 3 sockets (17, 19, 21 mm).
Save 10%
In stock
Gys
Reference: 065109
(16 reviews)
€1,244.53
€1,382.82
1 045,83 € tax excl.
or 4 x 311,13 €
Free delivery
2-year warranty
Welds steel, stainless steel and aluminum from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6/0.8 to 1.6 mm and aluminum 0.8 to 1.6mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- DC TIG Lift - Lift arc ignition
- MMA (basic and rutile electrode up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and highly intuitive settings
Compatible with 9 kVA generator and 100m extension cord
Single-phase power supply 230 V - 16 A
Dimensions: 27.5 x 55 x 44 cm - 20kg
IP21 rating
Supplied with:
1x 250 A 3m torch MB25
1x 200A 2.5m ground cable
1x MMA electrode holder 2m
1x User manual
2x 0.8/1mm drive rolls
TIG torch optional
Save 20%
In stock
Sacit
Reference: F11808S
(35 reviews)
€6.64
€8.29
5,58 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 273 Grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Save 40%
In stock
Soudexpert
Reference: E6013401
€7.73
€12.89
6,50 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode E6013
Diameter: 4 mm
Rod length: 400 mm
Box of 1 kg
1 kg equals +/- 21 rods
Arc start from 40V - Direct current. Negative (-) polarity at electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framing
Save 10%
In stock
ESAB
Reference: 0705002009
(10 reviews)
€689.21
€765.79
579,17 € tax excl.
or 4 x 172,30 €
Free delivery
2-year warranty
Why choose the ESAB Rogue ES 201IP Pro?
Two welding processes: MMA / Lift TIG
Duty cycle: 129A@60% and 200A @25%
Robust and powerful: 10–200A single-phase (230V)
3 m cables for power supply, electrode holder and ground clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes on DC
Generator compatible - IP23S
Ideal for craftsmen and advanced DIY enthusiasts
3-year warranty
Delivered with:
1 electrode holder + 16 mm² cable, length 3 m - 13 mm connector
1 ground clamp + 16 mm² cable, length 3 m - 13 mm connector
1 shoulder strap for carrying the unit when working at height
Save 10%
In stock
ESAB
Reference: 0700301092
(6 reviews)
€1,481.55
€1,646.16
1 245,00 € tax excl.
or 4 x 370,39 €
Free delivery
2-year warranty
The ESAB Rogue EMP 210 PRO is a multi-process INVERTER technology welding machine designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system offers industrial-level arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics to suit the material being welded.
Weighing only 16.7 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.
True multi-process unit with Synergic MIG, Manual MIG, MIG brazing, flux-cored, Lift TIG and MMA (including 6010) processes
The 5.0" TFT screen is intuitive and clear, allowing the welder easy adjustment and a quick learning curve.
Synergic welding programs: complete range of welding parameters, 0.5 to 10.0 mm with a single control knob
Power Factor Correction (PFC): ensures a stable arc, resistant to mains voltage fluctuations, even when working with long extension cords up to 100 m
Unique robust industrial design: multiple handles for easy handling and cable management
Arc dynamics: precise adjustment of arc characteristics for a crisp / stable arc for carbon steel or a fluid / soft arc for stainless steel
Jobs: ability to save / recall up to 10 operations
Compliant with IP23S standard for indoor / outdoor use
Applications
Automotive construction
Automotive bodywork
Agricultural equipment
Civil engineering
Mechanical contractors
Repair and maintenance
Light fabrication
Package contents:
1 Multi-process welding machine 210 A with 3 m power cable and 16 A plug
1 MIG torch MXL 201, 3 m with Euro connector, with 1 contact tip for steel or stainless steel wire Ø 0.8 mm
1 Ground clamp with 3 m cable, OKC 35-50 16 mm2.
1 Electrode holder, Handy 200 A, heavy-duty 50 mm OKC, with 3 m cable.
1 Gas hose 4.5 m with quick connector.
1 Ø 200 mm spool of ESAB OK AristoRod steel wire 0.8 mm, weight 1 kg
1 Feed roller 0.6 / 0.8 mm (fitted on the machine) + 1 roller 0.8 / 1 mm for steel or stainless steel wire.
1 roller 0.8 / 0.9 mm for flux-cored wire
1 roller 1 / 1.2 mm for aluminum wire
1 nozzle for flux-cored wire (gasless) + 1 contact tip Ø 0.8 mm and 1 contact tip Ø 0.9 mm
1 user manual and safety instructions.
Save 50%
In stock
Reference: DESTBester6013
€5.95
€11.90
5,00 € tax excl.
Fast delivery
2-year warranty
Bester 6013 Electrodes (20 pcs)
Save 50%
In stock
Soudexpert
Reference: JWS100
€12.39
€24.79
10,42 € tax excl.
Fast delivery
2-year warranty
Medium welding magnet
High holding force: 44kg
Secure hold at three different angles: 45 - 90 and 135°
Compact and robust, very versatile
For welding, brazing and pipe installation
Allows welding with precision and efficiency
Save 10%
In stock
Telwin
Reference: 816208
€1,823.83
€2,026.48
1 532,66 € tax excl.
or 4 x 455,96 €
Free delivery
2-year warranty
This machine allows welding with tungsten electrodes (TIG welding) steel, stainless steel, copper, nickel ...including aluminium .
It also allows welding with rutile or basic electrodes (MMA welding kit optional).
It features the following functions:
TIG LIFT: Facilitates electrode striking.
TIG HF High frequency CONTACTLESS ignition
TIG 2T/4T (manual or automatic welding)
TIG SPOT allows tacking of parts before welding.
HOT START adjustable: additional starting power for electrodes that are difficult to strike.
SLOPE DOWN adjustable: this system eliminates arc fade, thus preventing the formation of a crater at the end of the weld bead.
ARC FORCE: This process increases the amperage when the welding arc is kept short, which has the effect of increasing penetration and the mechanical strength of the weld bead.
ANTI STICKING: in the case of welding with coated electrodes, prevents electrode overloading and thus preserves its characteristics,
TIG BI LEVEL: two different welding current parameters can be selected during the welding process, PRE-GAS/POST-GAS
( automatically adjusted by the microprocessor according to the current intensity and the welding duration.
VRD: Improves safety during welding operations in damp environments
It also features the PULSE function particularly suited for welding thin plates where low heat input to the workpiece is required and adapted for welding in all positions.
As the pulse frequency increases, arc stability increases and therefore welding precision improves as well.
It also features the EASY PULSE system allowing immediate pulsed mode welding even if the welder is not familiar with TIG welding, thanks to automatic parameter adjustment
THINSPOT function, enabling fast and precise spot welding.
For gas connection of the machine, it is recommended to use fitting 804208.
Save 10%
In stock
Telwin
Reference: 829569
€151.73
€168.59
127,50 € tax excl.
or 3 x 50,58 €
Free delivery
2-year warranty
Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1500 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Quick r
Save 20%
In stock
Gys
Reference: 080768
(2 reviews)
€1,383.52
€1,729.39
1 162,64 € tax excl.
or 4 x 345,88 €
Free delivery
2-year warranty
Thanks to its integrated compressor, the EASYCUT K35 PFC plasma cutter allows you to cut metal on any construction site where a single-phase power supply is available.
Its PFC technology allows it to operate from 195 V to 265 V and achieve quality cuts even on 100 m construction site extension cords.
Small, lightweight and easy to transport, it is capable of delivering 35 A of power to cut different types of metals up to 15 mm thick in separation cut.
Automatic air regulation adapted to the TPT 35 torch.
Cuts all steels (mild, stainless, hardened, HSLA), aluminum, copper, etc. and cutting speed higher than Oxy-fuel thermal cutting
Very practical on construction sites thanks to its integrated compressor.
Internal air filter with automatic purge to prevent condensation in the torch.
HF-free ignition that avoids interference that could damage nearby electronic equipment.
Storage compartment for consumables.
Ideal for travel and construction sites
Accepts extension cords up to 100 m.
Reinforced body and anti-shock skids.
Compact and easily movable on site.
Protected against overvoltages up to 400 V (PROTEC 400).
Rated IP23S to withstand harsh environments.
Optimized cooling with a ventilation channel that isolates the electronic components from dust.
Delivered with:
a TPT 35 torch with a length of 4 m
a ground clamp with a 10 mm² cross-section cable, length 2 m
Two nozzles and two electrodes
Save 10%
In stock
AEG Powertools
Reference: 4935412266
(1 review)
€217.55
€241.72
182,82 € tax excl.
or 3 x 72,52 €
Free delivery
2-year warranty
. 1200 W motor
. Electronic speed controller to adapt speed to materials
. Torque and speed optimised for polishing work
. Auto-stop carbon brushes, easily accessible
. "Full-hand" trigger
. Spindle lock
. Ergonomic design with two-handed grip for intensive work
. Supplied with a side handle, 4m cable, sanding pad and gearbox protection kit
Save 20%
In stock
Soudexpert
Reference: 202516-PAPR
€471.04
€588.80
395,83 € tax excl.
or 4 x 117,76 €
Free delivery
2-year warranty
Welding helmet with powered air-purifying respiratory protection Protects eyes from IR/UV and the operator's respiratory tract Optimum field of view 75x112mm True-Color Technology - Optical class 1/1/1/1 Lithium battery life of approximately 8 hours - Charging time 1h 3 adjustable airflow rates to suit requirements (from 170 l/min to 230 l/min) 4 solar sensors for very high sensitivity and ultra-fast reaction time (0.08 ms) Fixed light shade: DIN 3 Variable dark shade DIN 9/12-13/15 Digital controls Grinding mode The filter is rated TH3 and retains 99.996% of welding particles Standards EN 166 / EN 175 / EN 379 / EN 12941 Supplied with respiratory protection system, lithium battery, EU charger, harness, flow meter Weight 5 kg
In stock
Telwin
Reference: 816056
(1 review)
€1,268.34
1 065,83 € tax excl.
or 4 x 317,09 €
Free delivery
2-year warranty
The Technomig 260 Dual Synergic is a welding machine (MIG-MAG / FLUX / BRAZING / MMA / TIG-Lift) of 250A.
It is easy to use thanks to One Touch technology.
With its versatility, Technomig 260 Dual Synergic allows operation on different thicknesses and various welded and braze-welded materials, making it the ideal tool for many fields of application, from maintenance to heavy steelwork and bodywork.
It is possible to manually adjust the arc length to modify the shape of the weld bead according to the operator's style and preferences
One Touch
Setting up the Technomig 260 Dual Synergic is simple and immediate: just program the material thickness and start welding. The 25 synergic curves provided for different gases and materials allow quality welds on steel, stainless steel, aluminium and galvanized sheet metal without wasting time on machine adjustments.
ATC
This process allows welding of thin thicknesses with great ease, reducing material distortion
Arc stability even at low currents.
Fast and precise spot welding
facilitates edge-to-edge sheet metal welding
Delivered with:
1 MIG-MAG torch 250 A length 3 m
1 reversible roller for steel/stainless wire Ø 0.6/0.8 mm
1 gas hose length 1 m
1 earth clamp + cable length 3 m
For connecting the machine to gas, it is recommended to use fitting 804208.
Save 10%
In stock
Gys
Reference: 031432
(48 reviews)
€475.01
€527.79
399,17 € tax excl.
or 4 x 118,75 €
Free delivery
2-year warranty
Ideal and supremely powerful tool for the demanding professional
High duty cycle: 120A at 60% and 200A at 20%
Capable of welding 45 electrodes of Ø 3.2 mm in 1 hour
MMA and TIG Lift process
Current range: 10 to 200A
Welds steel, cast iron and stainless steel up to 10mm thickness
Electrode diameter: 1.6 to 5 mm
Technologies: Hot Start, Arc Force, Antisticking, PFC, ADS
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 96 V
Weight: 5.5 kg - 2-year warranty
Supplied in a case with:
1x Cable with ground clamp (1.6 meters) 25mm²
1x Cable with electrode holder (2 meters) 25mm²
Optional: TIG valve torch - 4m - 10/25mm² (087583)
Save 20%
In stock
Lincoln Electric
Reference: K14439-1
€709.04
€886.30
595,83 € tax excl.
or 4 x 177,26 €
Free delivery
2-year warranty
The Sprinter T is a compact and lightweight welding machine (under 9 kg) delivering 200 A for all electrode types up to 4 mm. Versatile, it offers MMA, HF TIG and pulsed TIG welding, with dual voltage 120/230 V and an intuitive interface, ideal for any maintenance, fabrication or light construction project
Sanding belt 100x1000 mm grit 60