Italy
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Gys
Reference: 089280
(1 review)
€46.41
39,00 € tax excl.
Fast delivery
2-year warranty
2 Type B Drive Rolls for flux-cored wire 1.2/1.6 mm MIG welding GYS machine
Drive Roller for MIG-MAG Welding Machine
Refine your search
By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View my favorites
View as
In stock
ESAB
Reference: 0367556004
€35.18
29,56 € tax excl.
Fast delivery
2-year warranty
1 reversible drive roll for aluminum wire, section 1 and 1.2 mm, compatible with the ESAB welder references listed below.
ROGUE EM180
ROGUE EMP 210PRO
REBEL EMP205ic AC/DC
REBEL EMP 215c
In stock
ESAB
Reference: 0349312497
€23.26
19,55 € tax excl.
Fast delivery
2-year warranty
1 feed roller for flux-cored wire (gasless) with diameter 0.9 to 1.2 mm, compatible with the ESAB welder references listed below.
ROGUE EM180
ROGUE EMP 210PRO
REBEL EMP205ic AC/DC
REBEL EMP 215c
In stock
ESAB
Reference: 036755
(2 reviews)
€35.18
29,56 € tax excl.
Fast delivery
2-year warranty
We offer 3 wire feed rollers for steel or stainless steel wire, compatible with the ESAB welder models listed below.
ROGUE EM180
ROGUE EMP 210PRO
REBEL EMP205ic AC/DC
REBEL EMP 215c
| Combinations | Price | |
| €22.79 | ||
| €22.79 | ||
| €35.18 | ||
Lincoln Electric
Reference: S33444
(2 reviews)
€11.10
9,33 € tax excl.
Fast delivery
2-year warranty
These drive rolls are designed for Lincoln welder models in the BESTER 190C -Multi and 215MP range
4 drive rolls available depending on the Ø and type of wire to be welded:
For solid steel or stainless steel wire Ø 0.6 / 0.8 mm ( Lincoln reference S33444-20 )
For solid steel or stainless steel wire Ø 0.8 / 1 mm ( Lincoln reference S33444-21 )
For solid aluminium wire Ø 0.8/ 1 mm ( Lincoln reference S33444-22 )
For flux-cored wire Ø 0.9 / 1.2 mm ( Lincoln reference S33444-23 )
The drive roll is reversible; with one drive roll you have two possible wire diameters.
| Combinations | Price | |
| €11.10 | ||
| €10.81 | ||
| €10.81 | ||
| €13.89 | ||
In stock
Kemppi
Reference: W00
(1 review)
€38.68
32,50 € tax excl.
Fast delivery
2-year warranty
These drive rolls are suitable for the Minarmig 170 and 200 EVO welding machines.
2 references depending on your needs
For use with flux-cored wire diameter 0.8 to 1 mm (without gas): W001692
For use with solid steel, stainless steel or aluminum wire diameter 0.6 to 1 mm (without gas): W000749
| Combinations | Price | |
| €51.56 | ||
| €38.68 | ||
In stock
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Flux
€124.95
105,00 € tax excl.
Free delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For flux-cored wire (gasless)
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
- 1 Metal wire guide for EURO connector
- 1 Plastic wire guide set
| Combinations | Price | |
| €124.95 | ||
| €124.95 | ||
In stock
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Aluminium
€107.10
90,00 € tax excl.
Fast delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid aluminum wire
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
- 1 Metal wire guide for EURO connector
- 1 Plastic wire guide set
| Combinations | Price | |
| €107.10 | ||
| €107.10 | ||
| €107.10 | ||
| €107.10 | ||
| €107.10 | ||
Supplier stock
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Acier
(3 reviews)
€107.10
90,00 € tax excl.
Fast delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid steel or stainless steel wire
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
- 1 Metal wire guide for EURO connector
- 1 Plastic wire guide set
| Combinations | Price | |
| €107.10 | ||
| €107.10 | ||
| €107.10 | ||
| €107.10 | ||
| €107.10 | ||
In stock
Telwin
Reference: 742729
(1 review)
€47.90
40,25 € tax excl.
Fast delivery
2-year warranty
2 Double-groove rollers for Mig-Mag TELWIN welder for flux-cored wire, available for wire diameter: 1 / 1.2 mm
Compatible with Telwin welders:
TECHNOMIG 223 TREO - 240-260
ELECTROMIG 281/2 Turbo - 300 SYN. - 230- 330 WAVE - 400, 450 Synergic -550 Synergic
MASTERMIG 300 -270/2 - 400 - 500
ELECTROMIG 300 Synergic - 330 Wave - 430 WAVE - 450 - 550 -330-
SUPERMIG 380
SUPERIOR 400 MIG PACK - 630 MIG PACK -
INVERPULSE 60.30, 60.40
Supplier stock
DECA
Reference: DECA-GAL-MIGA
(13 reviews)
€11.60
9,75 € tax excl.
Fast delivery
2-year warranty
The drive rollers listed below are compatible with the following DECA units:
MIGA 215 - MIGA 218 - MIGA 220
for welding wire:
Steel Ø 0.6 / flux-cored wire Ø 0.6 to 1.2* mm
Steel or stainless steel Ø 0.8 / 1** mm
* Flux-cored wire Ø 1.2 mm is possible with the MIGA 220 and MIGA 225XL units
For MIGA 215 and 218 models, flux-cored wire up to Ø 0.9 mm only.
** solid wire Ø1 mm steel or stainless steel is possible from the MIGA 220 unit
| Combinations | Price | |
| €8.72 | ||
| €11.60 | ||
DECA
Reference: 011252
(5 reviews)
€11.60
9,75 € tax excl.
Fast delivery
2-year warranty
Reversible drive roller for aluminium wire Ø 0.8 / 1 mm for the DECA welding machines listed below:
MIGA 215 - MIGA 218 - MIGA 220
This drive roller should also be used with the MIGA 220 welding machine when welding with aluminium wire Ø 1.2 mm.
In stock
Gys
Reference: GYS-GAL1B-FLUX
(1 review)
€23.75
19,96 € tax excl.
Fast delivery
2-year warranty
We offer 1 reversible roller for flux-cored wire for MIG-MAG welder GYS
Ø 0,6 /0,9 mm
0,9 / 1,2 mm
Compatible with Gys welders:
MONOGYS 200-2CS
MONOGYS 250/320
TRIMIG
PROMIG
MULTIPEARL 210 and 211
MULTIWELD 320 and 400
NEOPUSE 220
KRONOS
Wire feeder WF35
| Combinations | Price | |
| €23.75 | ||
| €23.75 | ||
In stock
Gys
Reference: GYS-GAL-B-ALUMINIUM
€18.74
15,75 € tax excl.
Fast delivery
2-year warranty
1 double V-groove roller 35° for GYS MIG welder for solid aluminium wires, available for wire diameters:
0.8/ 1 mm
1 / 1.2 mm
GYS welder compatibility:
• MONOGYS 200-2CS et 250-4CS
• TRIMIG 200-4S, 250-4S et 300-4S
• PROMIG 350-4S et 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL et 201.4
• CARMIG
• M1, M3, T1 et T3 GYS
• W5S-4L
| Combinations | Price | |
| €18.74 | ||
| €18.74 | ||
In stock
Gys
Reference: GYS-GAL-B-ACIER
€19.29
16,21 € tax excl.
Fast delivery
2-year warranty
1 double-groove roller for GYS MIG-MAG welder for steel or stainless wire, available for wire diameter:
0.6 / 0.8 mm
0.8 / 1 mm
1 / 1.2 mm
Compatible with GYS welders:
• MONOGYS 200-2CS
| Combinations | Price | |
| €19.29 | ||
| €19.29 | ||
| €19.29 | ||
In stock
DECA
Reference: DECA-GAL-JOB220-F
€17.71
14,88 € tax excl.
Fast delivery
2-year warranty
The rollers listed below are compatible with the following DECA welding machines:
JOB 220 LAB
MIGA 225 XL
for gasless welding wire
Ø 0.8 / 0.9 mm
Ø 0.9 / 1.2 mm
| Combinations | Price | |
| €17.71 | ||
| €17.71 | ||
In stock
DECA
Reference: DECA-2GAL-JOB522-AL
(1 review)
€32.73
27,50 € tax excl.
Fast delivery
2-year warranty
The drive rolls proposed below are compatible with the following DECA multi-process welding machines:
JOB 522 and 523 LAB
for aluminum welding wire
Ø 0.8 / 1 mm
Ø 1 / 1.2 mm
| Combinations | Price | |
| €32.73 | ||
| €32.73 | ||
In stock
DECA
Reference: DECA-2GAL-JOB522
€32.23
27,08 € tax excl.
Fast delivery
2-year warranty
The drive rolls listed below are compatible with the following DECA welding machines:
JOB 522 and 523 LAB
for welding wire:
Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm
| Combinations | Price | |
| €32.23 | ||
| €32.23 | ||
In stock
DECA
Reference: DECA-GAL-JOB220-AL
€13.69
11,50 € tax excl.
Fast delivery
2-year warranty
The drive rollers listed below are compatible with the following DECA machines:
JOB 220 LAB
MIGA 225 XL
for aluminum welding wire of diameter
0.8 / 1 mm
1 / 1.2 mm
| Combinations | Price | |
| €13.78 | ||
| €13.69 | ||
In stock
DECA
Reference: 011224
€41.15
34,58 € tax excl.
Fast delivery
2-year warranty
2 drive rollers for DECA multi-process machine reference JOB 522 or 523 LAB, for flux-cored welding wire (gasless) with diameter 0.8 to 1.2 mm.
In stock
Lincoln Electric
Reference: LINCOLN-GALET
(10 reviews)
€34.71
29,17 € tax excl.
Fast delivery
2-year warranty
4 drive rolls available depending on the Ø and type of welding wire:
For solid steel or stainless steel wire Ø 0.8 / 1 mm (Lincoln reference KP14016-1.0)
For solid steel or stainless steel wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2)
For solid aluminium wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2A)
For flux-cored wire Ø 0.9 / 1.2 mm (Lincoln reference KP14016-1.1R)
The drive roll is reversible; with one roll you have two possible welding wire diameters.
These drive rolls fit the following Lincoln welders:
Speedtec 180-200-215 C
POWERTEC 161C-191C-213C-271C
| Combinations | Price | |
| €38.68 | ||
| €34.71 | ||
| €38.68 | ||
| €38.68 | ||
| €30.82 | ||
| €38.68 | ||
Lincoln Electric
Reference: 2GAL-Fourré
€22.31
18,75 € tax excl.
Fast delivery
2-year warranty
The flux-cored wire drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL WELDING/OTAI
Futura 2005
Futura 2505
for welding wire: Ø 1.2 / 1.6 mm
| Combinations | Price | |
| €22.31 | ||
| €23.00 | ||
Lincoln Electric
Reference: 2GAL-Aluminium
(1 review)
€22.31
18,75 € tax excl.
Fast delivery
2-year warranty
The aluminium wire drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL-WELDING (OTAI)
Futura 2005 and 0505C
for welding wire:
Aluminium Ø 0.8 / 1 mm
Aluminium Ø 1.2 / 1.6 mm
| Combinations | Price | |
| €25.68 | ||
| €22.31 | ||
In stock
Lincoln Electric
Reference: 2GAL-Acier
€47.01
39,50 € tax excl.
Fast delivery
2-year warranty
The drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL WELDING/OTAI
Futura 2005
Futura 2505
for welding wire:
Steel or stainless steel Ø 0.8 / 1 mm
Steel or stainless steel Ø 0.6 / 0.8 mm
| Combinations | Price | |
| €50.13 | ||
| €47.01 | ||
| €52.16 | ||
Supplier stock
Telwin
Reference: 742576 TELW-GAL2-ACIER
(1 review)
€14.38
12,08 € tax excl.
Fast delivery
2-year warranty
2 double-groove rollers for Telwin MIG-MAG welding machine for steel or stainless steel wire, available for wire diameters: 0.6 / 0.8 mm and 1 / 1.2 mm
Compatible with Telwin welding machines:
TECHNOMIG 243 WAVE - 223 TREO 240 - 260
ELECTROMIG 230 - 300 Synergic - 330 Wave - 430 WAVE - 550 SYNERGIC - 281/2 Turbo - 400 - 450 SYNERGIC -
MASTERMIG 270/2 - 300 400 - 500
SUPERMIG 380
SUPERIOR 400 MIG PACK - 630 MIG PACK
INVERPULSE 60.30- 60.40
| Combinations | Price | |
| €14.38 | ||
| €39.47 | ||
| €29.70 | ||
In stock
Telwin
Reference: 722167 TELW-GAL2-ALU
(1 review)
€39.07
32,83 € tax excl.
Fast delivery
2-year warranty
2 double-groove rollers for Telwin welding machine for aluminum wires, available for wire diameters: 0.8 / 1 mm and 1 / 1.2 mm
Compatible with Telwin welding machines:
TECHNOMIG 243 WAVE - 240 - 260
ELECTROMIG 281/2 Turbo -300 SYN. - 230 - 330 WAVE -400 - 450 SYNERGIC - 300 Synergic - 430 WAVE - 550 SYNERGIC -
MASTERMIG 270/2 - 300 - 400 - 500
SUPERMIG 380
SUPERIOR 400 MIG PACK -630 MIG PACK -
INVERSEPULSE 60.30 - 60.40
| Combinations | Price | |
| €45.91 | ||
| €39.07 | ||
In stock
Gys
Reference: GYS-GAL2-ALUMINIUM
(7 reviews)
€32.03
26,92 € tax excl.
Fast delivery
2-year warranty
2 double V-groove 35° drive rolls for GYS welder for solid aluminum wire, available for wire diameters:
0.8/ 1 mm
1 / 1.2 mm
GYS welder compatibilities:
• MONOGYS 200-4CS and 250-4CS
• TRIMIG 200-4S, 250-4S and 300-4S
• PROMIG 350-4S and 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL and 201.4
• CARMIG
• M1, M3, T1 and T3 GYS
• W5S-4L
| Combinations | Price | |
| €32.03 | ||
| €32.03 | ||
In stock
Telwin
Reference: 722019
(12 reviews)
€3.92
3,29 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for steel or stainless steel MIG welding wire Ø 0.6 and 0.8 mm and 0.9 flux-cored wire
Compatible with TELWIN welding machines:
TELMIG 170/1 - 180/2 - 195/2 - 200/2 - 203/2 - 250/2 Turbo - 251/2 Turbo - 281/2 Turbo
TECHNOMIG 210 Dual Synergic - 180 EURO-225
MAXIMA 200 - 230 - 270
MINIMAX 100
In stock
Gys
Reference: GYS-GAL2-ACIER
(22 reviews)
€34.71
29,17 € tax excl.
Fast delivery
2-year warranty
2 double-groove drive rolls for GYS MIG-MAG welder for steel or stainless steel wire, available for wire diameters:
0.6 / 0.8 mm
0.8 / 1 mm
1 / 1.2 mm
Compatible with Gys welding machines:
• MONOGYS 200-4CS and 250-4CS
• TRIMIG 200-4S, 250-4S and 300-4S
• PROMIG 350-4S and 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL and 201.4
• CARMIG
• M1, M3, T1 and T3 GYS
• W5S-4L
| Combinations | Price | |
| €34.71 | ||
| €34.71 | ||
| €30.74 | ||
In stock
Gys
Reference: 042407
(8 reviews)
€39.62
33,29 € tax excl.
Fast delivery
2-year warranty
2 double-groove drive rollers for GYS MIG-MAG welder for flux-cored wire Ø 0.9 and 1.2 mm
Compatible with GYS welders:
TRIMIG 200-4S, 250-4S and 300-4S
PROMIG 350-4S and 350-4S DUO DV
TF-4R
MULTIPEARL 200.4 XL and 201.4
W5S-4L
MONOGYS
In stock
Gys
Reference: GYS+GAL1D-FLUX
(7 reviews)
€17.35
14,58 € tax excl.
Fast delivery
2-year warranty
Reversible roller for:
Solid wire Ø0.8 / flux-cored wire 0.9
Flux-cored wire Ø 0.6 / 0.9 mm
Suitable for GYS machines:
Easymig 110 - 130 and 140
Smartmig 110
suitable for DECA machines:
Miga 215 - Miga 218 and Miga 220.
suitable for SCHUMACHER machines:
M 120 NG
D 144WG
| Combinations | Price | |
| €17.35 | ||
| €17.35 | ||
In stock
Gys
Reference: 039483
(6 reviews)
€18.79
15,79 € tax excl.
Fast delivery
2-year warranty
Drive roller for GYS MIG-MAG welding machine for steel or stainless steel wire of cross-section 0.6 and 0.8 mm.
Compatible with GYS welding machines:
Easymig: 110 - 130 and 140
Smartmig 110
Sparkmig 110
Neomig 130
Compatible with DECA welding machines:
Miga 215 - Miga 218 and Miga 220.
In stock
Gys
Reference: GYS-GAL1A-FLUX
(13 reviews)
€22.76
19,13 € tax excl.
Fast delivery
2-year warranty
Reversible drive roll for GYS MIG-MAG welder for flux-cored wire, available in the following diameters:
0.8 mm solid wire / 0.9 mm flux-cored wire
0.9 / 1.2 mm flux-cored wire
0.6 / 0.9 mm flux-cored wire
Compatible with GYS welding machines:
Smartmig 142 - 152 - 162 - 182 - 183 - 3P
Easymig 150 - 160 - 160XL
Multipearl 200-2
Multiweld
Monogys 200-2CS
| Combinations | Price | |
| €22.76 | ||
| €22.76 | ||
| €22.76 | ||
In stock
Gys
Reference: 041196
(28 reviews)
€16.76
14,08 € tax excl.
Fast delivery
2-year warranty
Double-groove drive roll for GYS MIG-MAG welding machine for aluminium wire Ø 0.8 and 1 mm.
Compatible with GYS machines:
Easymig 150 - 160 - 160XL
Smartmig 142 - 152 - 162 - 182 - 183 - 3P
Multipearl 200-2
Multiweld
In stock
Gys
Reference: GYS-GAL1A-ACIER
(23 reviews)
€16.74
14,07 € tax excl.
Fast delivery
2-year warranty
Double-groove drive roll for GYS MIG-MAG machine for steel or stainless steel wire, available for diameters:
0.6 / 0.8 mm.
0.8 / 1 mm
Compatible with GYS machines:
Smartmig 142 -152 - 162 - 182 - 183 3P
Easymig 150 - 160 - 160XL
Sparmig 140 - 160
Multipearl 200-2
Multiweld
| Combinations | Price | |
| €16.74 | ||
| €17.85 | ||
In stock
Telwin
Reference: 722629
(19 reviews)
€7.39
6,21 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG welding wire Ø 1 mm Steel - Stainless Steel and Aluminium
Compatible with TELWIN welding machines:
BIMAX 140 - 152 - 162 Turbo - 4.165 Turbo
TECHNOMIG 150 - 180 - 180 EURO
TECHNOMIG 180 Dual Synergic - 210 Dual Synergic - 225
MAXIMA 160 - 190 - 200 - 230 - 270
TELMIG 170/1 - 180/2 - 195/2 - 200/2 - 203/2 - 250/2 - 251/2 Turbo - 281/2 TURBO - 250/2 TURBO
In stock
Telwin
Reference: 722626
(18 reviews)
€4.91
4,13 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel flux-cored wire Ø 0.9 - 1.2 mm
Compatible with TELWIN machines:
BIMAX 140 - 152 - 162 Turbo - 4.165 Turbo
TECHNOMIG 150 - 180 Synergic - 210 - 180 EURO - 210 Dual Synergic - 150 DUAL SYNERGIC - 180 DUAL SYNERGIC -
MAXIMA 160 - 190 - 200 - 230 - 270
TELMIG 281/2 TURBO
In stock
Telwin
Reference: 722529
(12 reviews)
€3.92
3,29 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 0.6 and flux-cored wire Ø 0.8 and 0.9 mm
Compatible with TELWIN welders:
MINIMAX 100 - BIMAX 110 - 132 -140 -152 - 162 Turbo - 4.165 Turbo
TECHNOMIG 150 Dual Synergic
MAXIMA 160- 190 -200 - 230 - 270
TECHNOMIG 180 EURO - 210 SYNERGIC - 180 DUAL SYNERGIC -
TELMIG 281/2 TURBO
Supplier stock
DECA
Reference: DECA-GAL-JOB220
(2 reviews)
€13.73
11,54 € tax excl.
Fast delivery
2-year warranty
The drive rolls listed below are compatible with the following DECA welding machines:
JOB 220 LAB
MIGA 225 XL
for welding wire:
Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm
| Combinations | Price | |
| €13.73 | ||
| €13.73 | ||
In stock
HELVI
Reference: 33805101
€8.88
7,46 € tax excl.
Fast delivery
2-year warranty
Drive roller for Helvi Mig-Mag Fox 185 Flex Line welder for steel and stainless steel welding wire Ø 0.8 and 0.1 mm.
Also compatible with the following Helvi welder models:
Monomig 216 / 246 / 286 / 296
maximig 278 / 298
Unimig 298
Fox 185 Flex-Line
Tp 195
In stock
HELVI
Reference: 33805063
(3 reviews)
€14.83
12,46 € tax excl.
Fast delivery
2-year warranty
Drive roller for Helvi Mig-Mag welder for steel or stainless steel welding wire Ø 1 and 1.2 mm.
Also compatible with the following Helvi welder models:
Multimaker 192
Panther 152 / 172
Easymig 177 / 188 / 208N / 238
Monomig 166
Fox 180 / 181
Monomig 186 / 196
Diameter: 30.23 mm
Thickness 15.40 mm
Bore 9 mm
In stock
HELVI
Reference: 33805104
(2 reviews)
€12.84
10,79 € tax excl.
Fast delivery
2-year warranty
Drive roller for Helvi Mig-Mag welder for aluminum welding wire Ø 0.8 and 0.1 mm.
Also compatible with the following Helvi welder models:
Monomig 216 / 246 / 286 / 296
maximig 278 / 298
Unimig 298
Fox 185 Flex-Line
Tp 195
In stock
HELVI
Reference: 33805003
(1 review)
€9.87
8,29 € tax excl.
Fast delivery
2-year warranty
Drive roller for Helvi Mig-Mag Fox 185 Flex Line welder for Ø 0.6 and 0.8 mm steel and stainless steel wire.
Also compatible with the following Helvi welder models:
Monomig 216 / 246 / 286 / 296
maximig 278 / 298
Unimig 298
Fox 185 Flex-Line
Tp 195
HELVI
Reference: 33805001
(7 reviews)
€8.88
7,46 € tax excl.
Fast delivery
2-year warranty
Feed roller for Mig-Mag Helvi Fox 180 and 181 welder for wire Ø 0.6 and 0.8 mm steel and stainless steel and flux-cored wire Ø 0.8-0.9 mm
Also fits the following Helvi welder models:
Panther 132 / 152 / 172
Easymig 177
Monomig 166
Fox 180- 181
Diameter: 30.23 mm
Thickness: 15.40 mm
Bore: 9 mm
In stock
Telwin
Reference: 722130
(1 review)
€23.75
19,96 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for flux-cored steel MIG welding wire Ø 0.8 - 0.9 - 1.2 mm
Compatible with TELWIN machines:
TECHNOMIG 215 Dual Synergic - 225 - 230 and 243 WAVE -240 - 260
ELECTROMIG 220 Synergic - 230 - 300 SYN. - 330 WAVE
TELMIG 281/2 TURBO
MASTERMIG 220/2 - 270/2 - 300
In stock
Telwin
Reference: 742090
(3 reviews)
€19.79
16,63 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for aluminium MIG welding wire Ø 0.8-1 mm
Compatible with TELWIN welding machines:
TECHNOMIG 215 Dual Synergic - 225 - 240 - 260
ELECTROMIG 220 Synergic - 230 - 330 WAVE
MASTERMIG 220/2 - 270/2 - 300
In stock
Telwin
Reference: 742575
(2 reviews)
€9.88
8,30 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 0.6 and 0.8 mm
Compatible with TELWIN welders:
TECHNOMIG 215 Dual Synergic - 223 TREO - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic -300 SYN. - 230,330 WAVE-
MASTERMIG 220/2 - 270-2 - 300
TELMIG 281/2
In stock
Telwin
Reference: 742054
(5 reviews)
€15.37
12,92 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 1- 1.2 mm
Compatible with TELWIN machines:
TECHNOMIG 215 Dual Synergic - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic - 300 syn. - 230 - 330 wave-300 syn. -
MASTERMIG 220/2 - 270/2 - 300
TELMIG 281/2
DECA
Reference: 010673
(35 reviews)
€4.46
3,75 € tax excl.
Fast delivery
2-year warranty
Drive roller for DECA MIG-MAG welder compatible with the following DECA welder references:
Decastar 130 AC and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Decastar 150 E and 180 E
D-MIG 350 - 380 - 390
D-MIG 420S
Only the flux-cored wire roller can be fitted on the DECA Starflux 130 - Decastar 130 AC and D-Mig 230AC welders.
These welders operate exclusively with flux-cored wire (gasless).
| Combinations | Price | |
| €6.84 | ||
| €4.46 | ||
| €4.46 | ||
In stock
Gys
Reference: 072343
€69.37
58,29 € tax excl.
Fast delivery
2-year warranty
This kit is compatible with GYS MULTIPEARL 210-4 and MULTIPEARL 214-4 welders
It includes:
- 1 plastic ring
- 3 ceramic nozzles "No Gas"
- 2 type B rollers with 2 grooves for flux-cored wire Ø 0.9/1.0 & 1.2 mm
- 3 contact tips Ø 0.9/1.0 mm
In stock
Gys
Reference: 072336
(1 review)
€49.54
41,63 € tax excl.
Fast delivery
2-year warranty
This kit is suitable for the GYS MULTIPEARL 210-2 welding machine
It includes:
- 1 plastic ring
- 3 ceramic nozzles "No Gas"
- 1 type A roller with 2 grooves for flux-cored wire Ø 0.9/1.0 & 1.2 mm
- 3 contact tips Ø 0.9/1.0 mm
In stock
Gys
Reference: 041240
(33 reviews)
€28.26
23,75 € tax excl.
Fast delivery
2-year warranty
This kit allows gasless welding on GYS EasyMig and SmartMig welders
It includes:
1 drive roller with a Ø 0.9/1.2 mm groove for Ø 0.9 and 1.2 mm gasless wire
3 contact tips for Ø 0.9 mm flux-cored wire
1 special gas nozzle for flux-cored wire
Compatible with 150A torches only.
DECA
Reference: 010841
(35 reviews)
€12.59
10,58 € tax excl.
Fast delivery
2-year warranty
This kit includes
1 roller for use with steel or stainless steel wire Ø 0.6 - 0.8 and 1 mm
1 roller for use with flux-cored wire Ø 0.8 - 0.9 and 1.2 mm
1 roller for use with aluminium wire Ø 0.8 and 1 mm
Supplier stock
Kemppi
Reference: 3133940
€39.21
32,95 € tax excl.
Fast delivery
2-year warranty
Kemppi knurled V drive roller 1/1.2 flux-cored wire
Supplier stock
Gys
Reference: 062214
€17.65
14,83 € tax excl.
Fast delivery
2-year warranty
GYS Type A aluminium roller Ø 1.0/1.2
Supplier stock
ESAB
Reference: 0459052003
€40.66
34,17 € tax excl.
Fast delivery
2-year warranty
2 ESAB rollers D1/1.2
The drive roller is the wire feeder component that drives the wire from the spool to the torch. It is a key consumable of the semi-automatic welding machine: a suitable and well-maintained MIG roller ensures smooth wire feeding and a clean weld bead. Discover our selection of rollers for MIG-MAG welding machines.
The role of the drive roller in wire feeding
In a MIG-MAG machine, the MIG drive roller presses and drives the welding wire through the liner to the torch. The regularity of wire feeding directly determines arc stability and weld bead quality. A worn or unsuitable welding machine roller causes jerking, sticking, and irregular beads.
V-groove, U-groove, or knurled?
The profile of the drive roller is chosen according to the wire. The V-groove suits solid steel wire, the U-groove suits aluminum wire (softer, to avoid crushing), and the knurled groove suits flux-cored wire, whose surface requires more grip. A MIG roller with the wrong profile crushes or slips on the wire, which impairs feeding and welding quality.
The correct groove diameter
The groove diameter must exactly match the diameter of the wire being used. An oversized MIG drive roller lets the wire float; too tight, it crushes it. Always check compatibility between the wire diameter and the roller gauge. This simple detail prevents the majority of wire feeding problems.
Adjusting the feed pressure
Even with a good welding machine roller, the pressure roller must be correctly adjusted. Too much pressure crushes the wire and deforms its cross-section, causing jams in the liner; too little, the wire slips and does not advance smoothly. The correct setting is found by tightening progressively until smooth feeding is achieved, without slipping or visible crushing.
When to replace rollers?
A MIG roller wears over time: the groove deepens, the edges dull. Recurring jerking, marked wire, or irregular feeding despite correct adjustment signal that it is time to replace the rollers. It is an inexpensive MIG-MAG wear part whose replacement immediately restores feeding quality.
Rollers and wire types
The choice of drive roller is inseparable from the type of wire used. When switching from steel wire to flux-cored wire, it is often necessary to change the rollers and adjust the pressure. Similarly, aluminum wire requires specific U-groove rollers to avoid crushing this soft metal. Keeping a set of rollers suited to each wire avoids hasty handling and ensures optimal feeding with every consumable change.
Diagnosing a wire feeding problem
Jerking, marked wire, or an erratic arc are the classic signs of a worn or poorly adjusted MIG roller. Before blaming the power source, check the roller condition, the pressure setting, the contact tip, and the liner. In the majority of cases, the problem lies in the wire feeding circuit. A methodical diagnosis of these wear parts quickly resolves most weld bead defects in semi-automatic welding.
Rollers and overall wire feeder maintenance
The drive roller is part of an assembly: rollers, contact tip, liner, and torch. The wear of a single element degrades the entire circuit. When replacing rollers, take the opportunity to check the liner (blow it out with compressed air), the contact tip, and the nozzle. This grouped maintenance takes only a few minutes and preserves feeding quality for hundreds of meters of wire. A well-maintained wire feeder means a MIG machine operating at its full potential, bead after bead. Also remember to check the proper functioning of the spool brake, which contributes to correct wire tension and prevents tangles and overfeeding at start-up. A well-adjusted brake and rollers in good condition form the essential duo for smooth wire feeding.
For optimal operation, keep a spare set of drive rollers of each type and diameter you use: V-groove for steel, U-groove for aluminum, knurled for flux-cored wire. Their low cost makes it easy to keep spares on hand.
Our advice
For reliable wire feeding, choose a drive roller with the correct profile (V, U, or knurled) and the correct groove diameter for your wire. Adjust the pressure without excess and replace the rollers at the first signs of wear. Browse our selection of rollers for MIG-MAG machines.
Frequently asked questions
What type of roller to choose for a MIG machine?
Depending on the wire: V-groove for solid steel wire, U-groove for aluminum wire (softer, to avoid crushing), and knurled groove for flux-cored wire, which requires more grip. An unsuitable profile crushes or slips on the wire.
How to adjust the drive roller pressure?
By progressively tightening the pressure roller until smooth feeding is achieved, without slipping or visible crushing of the wire. Too much pressure deforms the wire and causes jams in the liner; too little, the wire slips and does not advance smoothly.
When should the rollers of a welding machine be replaced?
When recurring jerking, marked wire, or irregular feeding persist despite correct pressure adjustment. The groove wears over time: replacement immediately restores feeding quality. It is an inexpensive wear part.
Must the roller diameter match the wire?
Yes, exactly: the roller groove must match the diameter of the wire being used. A roller that is too wide lets the wire float; too tight, it crushes it. This compatibility is the first thing to check for correct wire feeding.